Commit Graph
1094 Commits
Author SHA1 Message Date
Mark D. Studebaker d2c47f4f5d add delay loops everywhere, as recommended by the ALI 1535 Bios Programming Guide.
Should fix stability problems.
      Patch by Ubel Walter <ubel@heidenhain.de>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2942 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-27 02:22:10 +00:00
Mark D. Studebaker 9ac1d40ae6 fix negative fan values. Patch from Chunhao.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2941 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-27 01:44:27 +00:00
Jean Delvare 72a3c7ac3b Stop updating non-existent vid on IT8705F.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2940 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-25 20:23:22 +00:00
Mark D. Studebaker bff323e3ca support IPMI version 0.9.
Patch from Yani Ioannou <yani.ioannou@gmail.com>
      http://bmcsensors-26.sourceforge.net/
      and tested by him and others,
      based on a previous patch from
      Vladislav Bogdanov <slava@nsys.by> located here:
      http://bubble.nsys.by/projects/ipmi/


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2934 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-19 02:50:35 +00:00
Jean Delvare f78a6c2310 Change the ADT7463 identification rules. Patch by Philip Pokorny.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2933 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-18 22:16:54 +00:00
Mark D. Studebaker e6bff4c2b6 add subclient registration
Change default to init=0


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2931 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-15 19:27:28 +00:00
Mark D. Studebaker e25e3511f4 w83792d driver and userspace support patch from Winbond.
by Chunhao Huang <huang0@winbond.com.tw>
         submitted by <DZShen@winbond.com.tw>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2925 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-10 19:03:52 +00:00
Mark M. Hoffman c6b95bf7e3 Patch by David Knierim <david_knierim@earthlink.net> to fix IN10
(+5V) scaling

>    I have been hunting down an issue related to the IN10 input of the
> LM93.   I have observed that there is a rather large error between the
> actual voltage and the voltage level displayed by sensors(1)  (~ .12V).
>
> Please find attached a small patch that fixes this problem.   The data
> sheet is very ambiguous and I and another engineer made the same mistake
> calculating the voltage per DAC step the first time we read the spec sheet.
>
> The confusion stems from an entry in the "maximum voltage" column that
> is higher than the value in the "absolute maximum range" column.  For 5V
> only, the value in the "register reading at maximum voltage" is for the
> voltage in the "absolute maximum range", NOT the "maximum voltage".  Whew!


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2924 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-10 03:45:34 +00:00
Jean Delvare 49aa0ea2b7 Drop pwmenable, as pwm cannot be disabled. This is a backport
from Linux 2.6.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2923 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-03-09 21:09:52 +00:00
Mark D. Studebaker b9c1c73625 initialize shutdown bit instead of CMP/INT bit
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2917 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-02-20 16:37:02 +00:00
Jean Delvare 65c760c9ff Properly differenciate between ADM1027 and ADT7463.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2916 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-02-19 19:17:17 +00:00
Mark D. Studebaker 3ee4fadb09 only initialize CMP/INT bit, and only if necessary
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2915 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-02-19 18:34:54 +00:00
Jean Delvare 5ee1b793e7 Add support for the nForce4. Patch from Hans-Frieder Vogt.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2909 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-02-17 21:40:14 +00:00
Mark D. Studebaker 01aafa1702 disable broken read i2c block functionality
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2897 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-02-09 01:05:32 +00:00
Jean Delvare 7c3a80b6fc Kill outdated code.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2893 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-02-07 19:58:57 +00:00
Mark D. Studebaker bd3556a4f3 mic74 cleanups
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2886 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-02-01 02:07:29 +00:00
Mark D. Studebaker 4815c844cc MIC74 driver as received from zebo25@yahoo.com.
My cleanups to follow.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2885 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-02-01 00:58:16 +00:00
Jean Delvare a37fd5f9d2 Fix bogus return in a middle of a function. Patch by Sergio
Gelato.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2884 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-31 18:13:33 +00:00
Jean Delvare ad276d8c4f Skip final initialization step for AS99127F chips.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2877 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-27 21:26:48 +00:00
Jean Delvare c0b57b8662 Limit block size with the relevant i2c constant instead of its
numeric value.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2876 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-27 21:26:02 +00:00
Jean Delvare d3fa22cae3 Make sure that temp2 and temp3 are not disabled. Let's just hope
it won't cause trouble if these channels are actually not connected.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2872 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-26 21:42:04 +00:00
Jean Delvare c06a1850ff Support the secondary Super-I/O address (0x4e/0x4f). This is a
backport from Linux 2.6.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2870 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-26 21:07:40 +00:00
Jean Delvare cb2e5b3d27 Cleanups backported from Linux 2.6 by Aurelien Jarno.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2868 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-26 19:49:11 +00:00
Jean Delvare 1756f8d8dd Drop unused client id.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2867 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-23 18:02:43 +00:00
Jean Delvare 64eeab4ffa Use standard LSB (0.5 degree C) for AS99127F temp2 and temp3.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2865 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-23 09:10:34 +00:00
Jean Delvare 5d53492dde Sync with mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2864 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-23 09:07:57 +00:00
Jean Delvare 400835efca Reduce range of accepted I2C addresses.
Differenciate between it87 and it8712.
Enable VID for it8712.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2862 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-22 15:46:50 +00:00
Jean Delvare 32cc706dd6 Cleanup detection function (backport from Linux 2.6).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2860 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-22 13:52:07 +00:00
Jean Delvare 692b232bea Use the same symbolic name for ICH7 that Linux 2.6 does.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2858 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-22 11:02:40 +00:00
Jean Delvare 89c7dabb13 Fix compilation broken by previous patch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2854 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-20 19:48:55 +00:00
Jean Delvare ba51b5f66e Fix chip detection with newer revisions of the DS1621. Reported
by Peter A. Henning, patch by Aurelien Jarno.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2853 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-19 22:19:44 +00:00
Jean Delvare b6728ccd48 Support IT8705F Super-I/O. Check for logical device activation.
Display chip name and revision when found. (backport from Linux 2.6)


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2846 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-13 20:08:20 +00:00
Jean Delvare b6f200507b Fix incorrect bitmask in PWM clock select debug message.
Reported by Mohan Mistry.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2845 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-12 19:26:53 +00:00
Jean Delvare 90016668df Kill legacy ifdef'd symbol exports.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2844 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-12 19:03:32 +00:00
Jean Delvare 2c5efab510 Delete unused semaphore.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2839 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-07 20:30:20 +00:00
Jean Delvare f746f446f7 Fix PCF8574 chips being improperly tagged as PCF8574A chips.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2838 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-07 20:25:48 +00:00
Jean Delvare aa1f43f680 Do not return negative values to i2c_detect on non-fatal errors.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2837 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-07 20:21:58 +00:00
Jean Delvare da76debaa5 Kill double variable initialization.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2836 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-07 20:17:30 +00:00
Mark M. Hoffman 9b230178b9 patch by David Knierim:
> [...] I've also included a simple patch to lm93.c to
> increase the wait between retries if there is a timeout.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2835 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-06 22:16:37 +00:00
Jean Delvare c89c31cd52 Better VID support for the W83627THF (backport from Linux 2.6).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2828 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-04 19:57:58 +00:00
Jean Delvare 997b0d93a2 Discard kernel 2.4.9 compatibility stuff (2.4.10 is the oldest
supported kernel).


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2827 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-04 17:25:18 +00:00
Jean Delvare 54a9669491 Don't include <linux/version.h> since we don't need to.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2826 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-01-04 16:26:51 +00:00
Mark D. Studebaker e958e52598 (mds) fix compile error of mine. Thanks Axel.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2817 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-12-31 14:12:37 +00:00
Jean Delvare 987686721c Fix MAX6657, MAX6658 and MAX6659 detection (backport from Linux
2.6).


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2816 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-12-29 11:00:18 +00:00
Jean Delvare c4d3e5f0fd Discard the SPD-centric checksum module parameter.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2814 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-12-29 10:43:57 +00:00
Jean Delvare 669b853e67 Use more PCI ID defines instead of numerical values.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2813 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-12-29 10:40:27 +00:00
Jean Delvare dfb598d267 82801CA is undefined before kernel 2.4.13.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2803 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-12-22 20:07:38 +00:00
Jean Delvare 4a41567854 Include sensors_compat.h for __devexit_p (only exists since
kernel 2.4.17).


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2802 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-12-22 17:46:24 +00:00
Jean Delvare 50263be538 Define __devexit_p for kernels which don't know about it (2.4.16
and older).


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2801 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-12-22 17:43:16 +00:00
Jean Delvare 2003e65297 Support the nForce3 250Gb.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2797 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-12-18 22:09:56 +00:00