Copy sysctl enums to chip drivers from sensors.h for now,
as seen in drivers included in 2.5 tree. File no longer included
from kernel side.
Apply i2c-proc change in CVS tagged -km2.
Partial clean and sort of includes everywhere.
Add i2c-dev.h, as a partial copy from i2c.
Add to sensors.h from i2c-proc.h to compile things.
Remove i2c-isa.h.
Reflect header file changes to lib/ and prog/.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1705 7894878c-1315-0410-8ee3-d5d059ff63e0
Module refcounting using .owner, removing of inc/dec_use.
These require (yet unreleased) i2c 2.8.0+.
Named initializers everywhere. Unified namespace.
Cleanup for 2.5, remove EXPORT_NO_SYMBOLS, declare everything
static. Apply initcalls.
PCI device registration changes for busses started, replicating
from i2c-amd*. While everything does compile, nothing really
works. Well, maybe i2c-amd* ported back from 2.5 tree.
After updating your work directory, run
> cvs diff -u -r LAST-PRE-2-8-I2C > lm-2.8-patches-1
BEWARE: I have not even insmoded any of these yet.
To compile, you need i2c from cvs too.
For 2.4 kernel :
> cvs co -r lk2-4 i2c
For 2.5 kernel :
> cvs co i2c
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1698 7894878c-1315-0410-8ee3-d5d059ff63e0
indication will always be valid; it won't be cleared forever by
reading the register. Do this by setting temp1_hyst to 127
and programming register 4C which sets it for temps 2 and 3.
Don't print hyst. value for temp1 in 'sensors' if == 127.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1407 7894878c-1315-0410-8ee3-d5d059ff63e0
to different addresses; this allows initialization of two
clients on the same i2c bus by preventing subclient address
conflicts at 0x48 and 0x49.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1312 7894878c-1315-0410-8ee3-d5d059ff63e0
Use 'init=0' to skip initialization, this should fix
those pesky PC's that crash when you load w83781d.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1209 7894878c-1315-0410-8ee3-d5d059ff63e0
This was broken by 2.6.0 because
2.6.0 didn't reset the fan clock setting at startup.
Therefore the AS_FAN_* macros were no longer needed to specially
correct the fan speed. So remove the special handling and the
AS_FAN_* macros and things should work now.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1135 7894878c-1315-0410-8ee3-d5d059ff63e0
_sysctl_real
_register_entry
_proc_real
_detect
_deregister_entry
_chips_data
which were the global symbols renamed in i2c-proc.[ch] in the
i2c package.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1101 7894878c-1315-0410-8ee3-d5d059ff63e0
that are configurable as we will count on the BIOS to configure
the chip correctly. This will likely change fan and temperature
readings for some users.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1039 7894878c-1315-0410-8ee3-d5d059ff63e0
Leave the files there for now.
Remove old installed sensors.o in kernel/Module.mk.
sensors.c was moved to i2c-proc.c in the i2c package.
i2c-isa.h was appended to i2c.h in the i2c package.
Delete all but the SYSCTL and ALARMS definitions in sensors.h,
as the rest of the file was moved to i2c-proc.h in the i2c package.
Remove #include "i2c-isa.h" lines in all chip drivers and
in bus driver i2c-isa.c.
This all probably breaks mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1015 7894878c-1315-0410-8ee3-d5d059ff63e0
the horrible
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
(LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
They should now both work with 2.3 kernels (including 2.4 prepatches)
and very new 2.2 kernels (ie. 2.2.18 prepatches)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@933 7894878c-1315-0410-8ee3-d5d059ff63e0
does not support the extended fan_div bits like the w83782d
does. This should fix fan2 so it defaults to a divisor
of 2 instead of 32.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@871 7894878c-1315-0410-8ee3-d5d059ff63e0
registers in I2C mode.
Instead of using bank 1 and 2, which was in violation of
the datasheets, use the separate I2C registers (usually
0x48 and 0x49). Register these addresses separately
using additional i2c_attach-client() calls.
Users will see new "subclient" registration messages
in the syslog.
/proc and libsensors interfaces are unchanged, i.e. the
chip still looks like a single device.
This should fix temp2 and temp3 for the as99127f, which
did not allow bank 1 and 2 accesses. Should not affect
operation for other chips as they worked before.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@686 7894878c-1315-0410-8ee3-d5d059ff63e0
Changes in sensors.c:
sensors_detect now skips addresses which are already taken. Even a
force parameter can not override this, as it could lead to major
problems.
For ISA addresses, the same is done; but the client drivers still need
a check if they claim more than one ISA address (as all of the current
ISA clients do).
Changes in chip drivers:
Removed the comment about needing address registration
Changes in i2cdetect.c:
Marks addresses which are already claimed
Changes in sensors-detect:
Warns when an address is already claimed, and skips it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@667 7894878c-1315-0410-8ee3-d5d059ff63e0
* Improved monitoring of /proc directories
Instead of doing:
proc_bus_i2c->fill_inode = &monitor_bus_i2c;
void monitor_bus_i2c(struct inode *inode, int fill)
{
if (fill)
MOD_INC_USE_COUNT;
else
MOD_DEC_USE_COUNT;
}
you can now simply set:
proc_bus_i2c->owner = THIS_MODULE;
and this is just as good!
* An old 2.3 problem seemingly never was resolved yet: instead of using
a *wait_queue directly, you have to use a wait_queue_head_t and
initialize it properly:
#if (LINUX_VERSION_CODE < 0x020301)
static struct wait_queue *pcf_wait = NULL;
#else
static wait_queue_head_t pcf_wait;
#endif
#if (LINUX_VERSION_CODE >= 0x020301)
init_waitqueue_head(&pcf_wait);
#endif
except for this, semantics remain the same (but using a plain
wait_queue_head_t instead of a pointer to a wait_queue)
* I had to change the semantics of sensors_register_entry slightly,
to make the monitoring of /proc/sys/dev/* files possible for kernels
2.3.27 and newer. It now takes an additional parameter, which you
can specify as THIS_MODULE.
* THIS_MODULE is only defined in kernels 2.3.13 and later; added
it to compat.h and the compatibility section of mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@640 7894878c-1315-0410-8ee3-d5d059ff63e0
(1.75 to 1.30 Volts) as specified in Intel document
243773302.pdf. Lower voltages are coming!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@617 7894878c-1315-0410-8ee3-d5d059ff63e0
Mark M. Hoffman