mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-23 11:54:33 +00:00
Mark D. Studebaker
ebb1dc9a20
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1986 7894878c-1315-0410-8ee3-d5d059ff63e0
78 lines
2.7 KiB
Plaintext
78 lines
2.7 KiB
Plaintext
Kernel driver `w83627hf.o'
|
|
=========================
|
|
|
|
Status: Beta.
|
|
|
|
Supported chips:
|
|
* Winbond W83627HF (ISA accesses ONLY)
|
|
Prefix 'w83627hf'
|
|
Addresses scanned: ISA address retrieved from Super I/O registers
|
|
Datasheet: Publicly available at the Winbond website
|
|
* Winbond W83627THF (ISA accesses ONLY)
|
|
Prefix 'w83627thf'
|
|
Addresses scanned: ISA address retrieved from Super I/O registers
|
|
Datasheet: Publicly available at the Winbond website
|
|
* Winbond W83697HF (ISA accesses ONLY)
|
|
Prefix 'w83697hf'
|
|
Addresses scanned: ISA address retrieved from Super I/O registers
|
|
Datasheet: Publicly available at the Winbond website
|
|
|
|
Authors: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>,
|
|
and Mark Studebaker <mdsxyz123@yahoo.com>
|
|
|
|
|
|
Module Parameters
|
|
-----------------
|
|
|
|
* force: short array (min = 1, max = 48)
|
|
List of adapter,address pairs to boldly assume to be present
|
|
* force_addr: int
|
|
Program the Super I/O register for the sensors ISA base address
|
|
* force_w83627hf: short array (min = 1, max = 48)
|
|
List of adapter,address pairs which are unquestionably assumed to contain
|
|
a `w83781d' chip
|
|
* force_w83627thf:
|
|
Ditto
|
|
* force_w83697hf:
|
|
Ditto
|
|
* ignore: short array (min = 1, max = 48)
|
|
List of adapter,address pairs not to scan
|
|
* ignore_range: short array (min = 1, max = 48)
|
|
List of adapter,start-addr,end-addr triples not to scan
|
|
* probe: short array (min = 1, max = 48)
|
|
List of adapter,address pairs to scan additionally
|
|
* probe_range: short array (min = 1, max = 48)
|
|
List of adapter,start-addr,end-addr triples to scan additionally
|
|
* init=[0,1] (default 1)
|
|
Use 'init=0' to bypass initializing the chip.
|
|
Try this if your computer crashes when you load the module.
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver implements support for ISA accesses *only* for
|
|
the Winbond W83627HF, W83627THF, and W83697HF Super I/O chips.
|
|
We will refer to them collectively as Winbond chips.
|
|
|
|
This driver supports ISA accesses, which should be more reliable
|
|
than i2c accesses. Also, for Tyan boards which contain both a
|
|
Super I/O chip and a second i2c-only Winbond chip (often a W83782D),
|
|
using this driver will avoid i2c address conflicts and complex
|
|
initialization that were required in the w83781d driver
|
|
(lm_sensors releases 2.7.0 and earlier).
|
|
|
|
If you really want i2c accesses for these Super I/O chips,
|
|
use the w83781d driver. However this is not the preferred method
|
|
now that this ISA driver has been developed.
|
|
|
|
For further information on this driver, /proc values, etc.
|
|
see the w83781d driver documentation.
|
|
|
|
|
|
Author/Maintainer
|
|
-----------------
|
|
Mark D. Studebaker (mdsxyz123@yahoo.com).
|
|
Derived from the w83781d driver.
|
|
Send requests to the sensors@stimpy.netroedge.com mailing list.
|