mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-18 11:09:32 +00:00
Mark D. Studebaker
ebb1dc9a20
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1986 7894878c-1315-0410-8ee3-d5d059ff63e0
58 lines
1.9 KiB
Plaintext
58 lines
1.9 KiB
Plaintext
Kernel driver `xeontemp.o'
|
|
=========================
|
|
|
|
Status: Complete; tested for most devices except Xeon.
|
|
|
|
Supported chips:
|
|
* Intel Xeon and other processors
|
|
Prefix `xeontemp'
|
|
Addresses scanned: I2C 0x18, 0x1a, 0x29, 0x2b, 0x4c, 0x4e
|
|
Datasheet: Publicly available at the Intel website
|
|
|
|
Authors: Frodo Looijaard <frodol@dds.nl>,Philip Edelbrock
|
|
<phil@netroedge.com>, and Mark D. Studebaker (mdsxyz123@yahoo.com)
|
|
|
|
License: GPL
|
|
|
|
|
|
Module Parameters
|
|
-----------------
|
|
|
|
* force: short array (min = 1, max = 48)
|
|
List of adapter,address pairs to boldly assume to be present
|
|
* force_xeontemp: short array (min = 1, max = 48)
|
|
List of adapter,address pairs which are unquestionably assumed to contain
|
|
a `xeontemp' chip
|
|
* probe: short array (min = 1, max = 48)
|
|
List of adapter,address pairs to scan additionally
|
|
* probe_range: short array (min = 1, max = 48)
|
|
List of adapter,start-addr,end-addr triples to scan additionally
|
|
* ignore: short array (min = 1, max = 48)
|
|
List of adapter,address pairs not to scan
|
|
* ignore_range: short array (min = 1, max = 48)
|
|
List of adapter,start-addr,end-addr triples not to scan
|
|
* read_only: int
|
|
Don't set any values, read only mode
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
Xeon and other Intel processors with an embedded i2c temperature
|
|
sensor look very similar to an adm1021.
|
|
The Xeon has only one sensor where the adm1021 has two.
|
|
Not all Xeon processors have this feature.
|
|
If you have an Intel processor, and sensors-detect recommended
|
|
the adm1021 driver, and the address is one of
|
|
0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e, and when using the
|
|
adm1021 driver, temp1 is invalid but temp2 looks correct, then
|
|
it is likely you should use this driver instead.
|
|
|
|
See the adm1021 documentation for more information.
|
|
|
|
Author/Maintainer
|
|
-----------------
|
|
Mark D. Studebaker (mdsxyz123@yahoo.com).
|
|
Derived from the adm1021 driver.
|
|
Send requests to the sensors@stimpy.netroedge.com mailing list.
|