mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-02 13:30:30 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
71 lines
1.6 KiB
Plaintext
71 lines
1.6 KiB
Plaintext
### Import note: separately listed for this motherboard, merged with config:
|
|
|
|
# sensors-detect will report a W83627DHG device and suggest loading the
|
|
# w83627ehf driver. However this motherboard has an ACPI BIOS which accesses
|
|
# the W83627DHG device already, so using the w83627ehf driver is not safe and
|
|
# thus discouraged.
|
|
|
|
##################
|
|
|
|
### Sensors configuration for Asus P5PE-VM motherboard
|
|
### 2014-02-28, ianp <snailbox88-dev -at- yahoo -dot- com>
|
|
### Comments are welcome.
|
|
|
|
|
|
chip "w83627ehf-*"
|
|
|
|
|
|
### Voltages
|
|
|
|
label in1 "+12V"
|
|
ignore in4 # ignored (not used?)
|
|
label in5 "+5V"
|
|
ignore in6 # ignore these
|
|
ignore in9 # as well (not used)
|
|
ignore cpu0_vid # Always at 0 in my case, so ignore it
|
|
|
|
### Scale +5V and +12V.
|
|
|
|
compute in5 @*(1+22/10), @/(1+22/10)
|
|
compute in1 @*(1+56/10), @/(1+56/10)
|
|
|
|
### Set in0 according to CPU nominal voltage.
|
|
|
|
set in0_min 1.2000
|
|
set in0_max 1.3375
|
|
set in5_min 5 * 0.95
|
|
set in5_max 5 * 1.05
|
|
set in1_min 12 * 0.95
|
|
set in1_max 12 * 1.05
|
|
|
|
### Temperatures
|
|
|
|
# temp3 is unidentified
|
|
|
|
label temp1 "M/B Temp"
|
|
label temp2 "CPU Temp"
|
|
|
|
### Set according to preference.
|
|
|
|
set temp1_max 60
|
|
set temp1_max_hyst 55
|
|
set temp2_max 60
|
|
set temp2_max_hyst 55
|
|
|
|
### Fans
|
|
|
|
### Ignore fan3 and fan5. There are
|
|
### only 2 fan connectors on this board.
|
|
### fan4 is missing.
|
|
|
|
label fan1 "CHA Fan"
|
|
label fan2 "CPU Fan"
|
|
ignore fan3
|
|
ignore fan5
|
|
|
|
### Set according to preference.
|
|
|
|
set fan1_min 0
|
|
set fan2_min 900
|
|
|