wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-15 10:39:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
dcdd19ed72ca8953fdf397bedc33c0e751dcbfb2
lm-sensors/kernel/chips/lm87.c
T
Jean Delvare ea30854a22 Drop DEFAULT_VRM, as it makes no sense to have a single default 
VRM for all drivers. Same was done it Linux 2.6 some times ago.
Also comment out all "set vrm" lines in sensors.conf.eg, as Linux 2.6
now accurately deduces the VRM from the CPU model.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3190 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-11-12 09:30:38 +00:00

983 lines
30 KiB
C
Raw Blame History

/*
LM87.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>
Philip Edelbrock <phil@netroedge.com>
Stephen Rousset <stephen.rousset@rocketlogix.com>
Dan Eaton <dan.eaton@rocketlogix.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-proc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include "version.h"
#include "sensors_vid.h"
/* Chip configuration settings. These should be set to reflect the
HARDWARE configuration of your chip. By default (read: when all of
these are left commented out), this driver assumes that the
configuration is the same as National's defaults for the Channel Mode
register.
Set to '1' the appropriate defines, as nessesary:
- External temp sensors 2 (possible second CPU temp)
This will disable the 2.5V and Vccp2 readings.
Ironically, National decided that you can read the
temperature of a second CPU or it's core voltage,
but not both! Comment out if FAULT is reported. */
/* #define LM87_EXT2 1 */
/* Aux analog input. When enabled, the Fan 1 reading
will be disabled */
/* #define LM87_AIN1 1 */
/* Aux analog input 2. When enabled, the Fan 2 reading
will be disabled */
/* #define LM87_AIN2 1 */
/* Internal Vcc is 5V instead of 3.3V */
/* #define LM87_5V_VCC 1 */
/* That's the end of the hardware config defines. I would have made
them insmod params, but it would be too much work. ;') */
/* Addresses to scan */
static unsigned short normal_i2c[] = { SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { 0x2c, 0x2e, SENSORS_I2C_END };
static unsigned int normal_isa[] = { SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
/* Insmod parameters */
SENSORS_INSMOD_1(lm87);
/* The following is the calculation for the register offset
* for the monitored items minimum and maximum locations.
*/
#define LM87_REG_IN_MAX(nr) (0x2b + ((nr) * 2))
#define LM87_REG_IN_MIN(nr) (0x2c + ((nr) * 2))
#define LM87_REG_IN(nr) (0x20 + (nr))
/* Initial limits */
/*
* LM87 register definition
*
*/
/* The LM87 registers */
#define LM87_INT_TEMP_HI_LIMIT_LOCKABLE 0x13
#define LM87_EXT_TEMP_HI_LIMIT_LOCKABLE 0x14
#define LM87_REG_TEST 0x15
#define LM87_REG_CHANNEL_MODE 0x16
#define LM87_REG_INT_TEMP_HI_LIMIT 0x17
#define LM87_REG_EXT_TEMP_HI_LIMIT 0x18
#define LM87_REG_ANALOG_OUT 0x19
/* These are all read-only */
#define LM87_REG_2_5V_EXT_TEMP_2 0x20
#define LM87_REG_VCCP1 0x21
#define LM87_REG_3_3V 0x22
#define LM87_REG_5V 0x23
#define LM87_REG_12V 0x24
#define LM87_REG_VCCP2 0x25
#define LM87_REG_EXT_TEMP_1 0x26
#define LM87_REG_INT_TEMP 0x27 /* LM87 temp. */
#define LM87_REG_FAN1_AIN1 0x28
#define LM87_REG_FAN2_AIN2 0x29
/* These are read/write */
#define LM87_REG_AIN1_LOW 0x1A
#define LM87_REG_AIN2_LOW 0x1B
#define LM87_REG_2_5V_EXT_TEMP_2_HIGH 0x2B
#define LM87_REG_2_5V_EXT_TEMP_2_LOW 0x2C
#define LM87_REG_VCCP1_HIGH 0x2D
#define LM87_REG_VCCP1_LOW 0x2E
#define LM87_REG_3_3V_HIGH 0x2F
#define LM87_REG_3_3V_LOW 0x30
#define LM87_REG_5V_HIGH 0x31
#define LM87_REG_5V_LOW 0x32
#define LM87_REG_12V_HIGH 0x33
#define LM87_REG_12V_LOW 0x34
#define LM87_REG_VCCP2_HIGH 0x35
#define LM87_REG_VCCP2_LOW 0x36
#define LM87_REG_EXT_TEMP_1_HIGH 0x37
#define LM87_REG_EXT_TEMP_1_LOW 0x38
#define LM87_REG_INT_TEMP_HIGH 0x39
#define LM87_REG_INT_TEMP_LOW 0x3A
#define LM87_REG_FAN1_AIN1_LIMIT 0x3B
#define LM87_REG_FAN2_AIN2_LIMIT 0x3C
#define LM87_REG_COMPANY_ID 0x3E
#define LM87_REG_DIE_REV 0x3F
#define LM87_REG_CONFIG 0x40
#define LM87_REG_INT1_STAT 0x41
#define LM87_REG_INT2_STAT 0x42
#define LM87_REG_INT1_MASK 0x43
#define LM87_REG_INT2_MASK 0x44
#define LM87_REG_CHASSIS_CLEAR 0x46
#define LM87_REG_VID_FAN_DIV 0x47
#define LM87_REG_VID4 0x49
#define LM87_REG_CONFIG_2 0x4A
#define LM87_REG_INTRPT_STATUS_1_MIRROR 0x4C
#define LM87_REG_INTRPT_STATUS_2_MIRROR 0x4D
#define LM87_REG_SMBALERT_NUM_ENABLE 0x80
/* Conversions. Rounding and limit checking is only done on the TO_REG
variants. Note that you should be a bit careful with which arguments
these macros are called: arguments may be evaluated more than once.
Fixing this is just not worth it. */
static inline u8 FAN_TO_REG(long rpm, int div)
{
if (rpm == 0)
return 255;
rpm = SENSORS_LIMIT(rpm, 1, 1000000);
return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
254);
}
#define FAN_FROM_REG(val,div) ((val)==0?-1:\
(val)==255?0:1350000/((div)*(val)))
#define TEMP_FROM_REG(val) ((val)*10)
#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT(((val)<0?(val)-5:\
(val)+5)/10,-128,127)
#define DIV_FROM_REG(val) (1 << (val))
#define DIV_TO_REG(val) ((val)==1?0:((val)==8?3:((val)==4?2:1)))
/* For each registered LM87, we need to keep some data in memory. The
structure is dynamically allocated whenever a new LM87 client is
found. */
struct lm87_data {
struct i2c_client client;
int sysctl_id;
enum chips type;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 in[6]; /* Scaled Register value */
u8 in_max[6]; /* Scaled Register value */
u8 in_min[6]; /* Scaled Register value */
u8 ain1; /* Register value */
u8 ain1_min; /* Register value */
u8 ain1_max; /* Register value */
u8 ain2; /* Register value */
u8 ain2_min; /* Register value */
u8 ain2_max; /* Register value */
u8 fan; /* Register value */
u8 fan_min; /* Register value */
u8 fan_div; /* Register encoding, shifted right */
u8 fan2; /* Register value */
u8 fan2_min; /* Register value */
u8 fan2_div; /* Register encoding, shifted right */
s8 ext2_temp; /* Register value */
s8 ext_temp; /* Register value */
s8 int_temp; /* Register value */
u8 ext_temp_max; /* Register value */
u8 ext_temp_min; /* Register value */
u8 ext2_temp_max; /* Register value */
u8 ext2_temp_min; /* Register value */
u8 int_temp_max; /* Register value */
u8 int_temp_min; /* Register value */
u16 alarms; /* Register encoding, combined */
u8 analog_out; /* Register value */
u8 vid; /* Register value combined */
u8 vrm; /* VRM version * 10 */
};
static int lm87_attach_adapter(struct i2c_adapter *adapter);
static int lm87_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind);
static int lm87_detach_client(struct i2c_client *client);
static int lm87_read_value(struct i2c_client *client, u8 register);
static int lm87_write_value(struct i2c_client *client, u8 register,
u8 value);
static void lm87_update_client(struct i2c_client *client);
static void lm87_init_client(struct i2c_client *client);
static void lm87_in(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
#if defined (LM87_AIN1) || defined (LM87_AIN2)
static void lm87_ain(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
#endif
static void lm87_fan(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm87_temp(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm87_alarms(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm87_fan_div(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm87_analog_out(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag,
long *results);
static void lm87_vid(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm87_vrm(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static struct i2c_driver LM87_driver = {
.name = "LM87 sensor driver",
.id = I2C_DRIVERID_LM87,
.flags = I2C_DF_NOTIFY,
.attach_adapter = lm87_attach_adapter,
.detach_client = lm87_detach_client,
};
/* -- SENSORS SYSCTL START -- */
#define LM87_SYSCTL_IN0 1000 /* Volts * 100 */
#define LM87_SYSCTL_IN1 1001
#define LM87_SYSCTL_IN2 1002
#define LM87_SYSCTL_IN3 1003
#define LM87_SYSCTL_IN4 1004
#define LM87_SYSCTL_IN5 1005
#define LM87_SYSCTL_AIN1 1006
#define LM87_SYSCTL_AIN2 1007
#define LM87_SYSCTL_FAN1 1102
#define LM87_SYSCTL_FAN2 1103
#define LM87_SYSCTL_TEMP1 1250 /* Degrees Celsius * 10 */
#define LM87_SYSCTL_TEMP2 1251 /* Degrees Celsius * 10 */
#define LM87_SYSCTL_TEMP3 1252 /* Degrees Celsius * 10 */
#define LM87_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define LM87_SYSCTL_ALARMS 2001 /* bitvector */
#define LM87_SYSCTL_ANALOG_OUT 2002
#define LM87_SYSCTL_VID 2003
#define LM87_SYSCTL_VRM 2004
#define LM87_ALARM_IN0 0x0001
#define LM87_ALARM_IN1 0x0002
#define LM87_ALARM_IN2 0x0004
#define LM87_ALARM_IN3 0x0008
#define LM87_ALARM_TEMP1 0x0010
#define LM87_ALARM_TEMP2 0x0020
#define LM87_ALARM_TEMP3 0x0020 /* same?? */
#define LM87_ALARM_FAN1 0x0040
#define LM87_ALARM_FAN2 0x0080
#define LM87_ALARM_IN4 0x0100
#define LM87_ALARM_IN5 0x0200
#define LM87_ALARM_RESERVED1 0x0400
#define LM87_ALARM_RESERVED2 0x0800
#define LM87_ALARM_CHAS 0x1000
#define LM87_ALARM_THERM_SIG 0x2000
#define LM87_ALARM_TEMP2_FAULT 0x4000
#define LM87_ALARM_TEMP3_FAULT 0x08000
/* -- SENSORS SYSCTL END -- */
/* The /proc/sys entries */
/* These files are created for each detected LM87. This is just a template;
though at first sight, you might think we could use a statically
allocated list, we need some way to get back to the parent - which
is done through one of the 'extra' fields which are initialized
when a new copy is allocated. */
static ctl_table LM87_dir_table_template[] = {
#ifdef LM87_AIN1
{LM87_SYSCTL_AIN1, "in6", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_ain},
#endif
#ifdef LM87_AIN2
{LM87_SYSCTL_AIN2, "in7", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_ain},
#endif
#ifndef LM87_EXT2
{LM87_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_in},
{LM87_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_in},
#endif
{LM87_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_in},
{LM87_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_in},
{LM87_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_in},
{LM87_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_in},
#ifndef LM87_AIN1
{LM87_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_fan},
{LM87_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_fan_div},
#define LM87_FANDIV_FLAG
#endif
#ifndef LM87_AIN2
{LM87_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_fan},
#ifndef LM87_FANDIV_FLAG
{LM87_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_fan_div},
#endif /* LM87_FANDIV_FLAG */
#endif /* LM87_AIN2 */
#ifdef LM87_EXT2
{LM87_SYSCTL_TEMP3, "temp3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_temp},
#endif
{LM87_SYSCTL_TEMP2, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_temp},
{LM87_SYSCTL_TEMP1, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_temp},
{LM87_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_alarms},
{LM87_SYSCTL_ANALOG_OUT, "analog_out", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_analog_out},
{LM87_SYSCTL_VID, "vid", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_vid},
{LM87_SYSCTL_VRM, "vrm", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm87_vrm},
{0}
};
static int lm87_attach_adapter(struct i2c_adapter *adapter)
{
int error;
struct i2c_client_address_data lm87_client_data;
lm87_client_data.normal_i2c = addr_data.normal_i2c;
lm87_client_data.normal_i2c_range = addr_data.normal_i2c_range;
lm87_client_data.probe = addr_data.probe;
lm87_client_data.probe_range = addr_data.probe_range;
lm87_client_data.ignore = addr_data.ignore;
lm87_client_data.ignore_range = addr_data.ignore_range;
lm87_client_data.force = addr_data.forces->force;
error = i2c_probe(adapter, &lm87_client_data, lm87_detect);
i2c_detect(adapter, &addr_data, lm87_detect);
return error;
}
static int lm87_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind)
{
int i;
struct i2c_client *new_client;
struct lm87_data *data;
int err = 0;
const char *type_name = "";
const char *client_name = "";
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto ERROR0;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access LM87_{read,write}_value. */
if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
new_client = &data->client;
new_client->addr = address;
new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &LM87_driver;
new_client->flags = 0;
/* Now, we do the remaining detection. */
if (kind < 0) {
if (((lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
!= 0x00) ||
(lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02))
goto ERROR1;
}
/* Fill in the remaining client fields and put into the global list */
type_name = "lm87";
client_name = "LM87 chip";
strcpy(new_client->name, client_name);
data->type = kind;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR3;
/* Register a new directory entry with module sensors */
if ((i = i2c_register_entry(new_client,
type_name,
LM87_dir_table_template,
THIS_MODULE)) < 0) {
err = i;
goto ERROR4;
}
data->sysctl_id = i;
/* Initialize the LM87 chip */
lm87_init_client(new_client);
return 0;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
ERROR4:
i2c_detach_client(new_client);
ERROR3:
ERROR1:
kfree(data);
ERROR0:
return err;
}
static int lm87_detach_client(struct i2c_client *client)
{
int err;
i2c_deregister_entry(((struct lm87_data *) (client->data))->
sysctl_id);
if ((err = i2c_detach_client(client))) {
printk(KERN_ERR "lm87.o: Client deregistration failed, "
"client not detached\n");
return err;
}
kfree(client->data);
return 0;
}
#define MAX_RETRIES 5
static int lm87_read_value(struct i2c_client *client, u8 reg)
{
int value, i;
/* Retry in case of read errors */
for (i = 1; i <= MAX_RETRIES; i++) {
if ((value = i2c_smbus_read_byte_data(client, reg)) >= 0)
return value;
printk(KERN_WARNING "lm87.o: Read byte data failed, "
"address 0x%02x\n", reg);
mdelay(i + 3);
}
/* <TODO> what to return in case of error? */
printk(KERN_ERR "lm87.o: All read byte retries failed!!\n");
return 0;
}
static int lm87_write_value(struct i2c_client *client, u8 reg, u8 value)
{
return i2c_smbus_write_byte_data(client, reg, value);
}
/* Called when we have found a new LM87. */
static void lm87_init_client(struct i2c_client *client)
{
struct lm87_data *data = client->data;
u8 reg;
/* Setup Channel Mode register for configuration of monitoring
* Default is 00000000b
* bit 0 - Configures Fan 1/AIN 1 input (1 = AIN)
* bit 1 - Configures Fan 2/AIN 2 input (1 = AIN)
* bit 2 - Configures 2.5V&Vccp2/D2 input (1 = 2nd Therm.)
* bit 3 - Configures Vcc for 5V/3.3V reading (0 = 3.3V)
* bit 4 - Configures IRQ0 Enable if = 1
* bit 5 - Configures IRQ1 Enable if = 1
* bit 6 - Configures IRQ2 Enable if = 1
* bit 7 - Configures VID/IRQ input as interrupts if = 1
*/
/* Preserve 4 MSB */
reg = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
/* I know, not clean, but it works. :'p */
lm87_write_value(client, LM87_REG_CHANNEL_MODE, (reg & 0xf0) |
#ifdef LM87_AIN1
0x01
#else
0
#endif
|
#ifdef LM87_AIN2
0x02
#else
0
#endif
|
#ifdef LM87_EXT2
0x04
#else
0
#endif
|
#ifdef LM87_5V_VCC
0x08
#else
0
#endif
);
data->vrm = 82;
/* Start monitoring */
reg = lm87_read_value(client, LM87_REG_CONFIG);
if (!(reg & 0x01)) {
printk(KERN_INFO "lm87.o: Monitoring starts\n");
lm87_write_value(client, LM87_REG_CONFIG,
(reg & 0x7e) | 0x01);
}
}
static void lm87_update_client(struct i2c_client *client)
{
struct lm87_data *data = client->data;
int i;
down(&data->update_lock);
if ((jiffies - data->last_updated > HZ) || /* 1 sec cache */
(jiffies < data->last_updated) ||
!data->valid) {
for (i = 0; i <= 5; i++) {
data->in[i] =
lm87_read_value(client,LM87_REG_IN(i));
data->in_min[i] =
lm87_read_value(client,LM87_REG_IN_MIN(i));
data->in_max[i] =
lm87_read_value(client,LM87_REG_IN_MAX(i));
}
data->ain1 =
lm87_read_value(client,LM87_REG_FAN1_AIN1);
data->ain1_min =
lm87_read_value(client,LM87_REG_AIN1_LOW);
data->ain1_max =
lm87_read_value(client,LM87_REG_FAN1_AIN1_LIMIT);
data->ain2 =
lm87_read_value(client,LM87_REG_FAN2_AIN2);
data->ain2_min =
lm87_read_value(client,LM87_REG_AIN2_LOW);
data->ain2_max =
lm87_read_value(client,LM87_REG_FAN2_AIN2_LIMIT);
data->fan =
lm87_read_value(client, LM87_REG_FAN1_AIN1);
data->fan_min =
lm87_read_value(client, LM87_REG_FAN1_AIN1_LIMIT);
data->fan2 =
lm87_read_value(client, LM87_REG_FAN2_AIN2);
data->fan2_min =
lm87_read_value(client, LM87_REG_FAN2_AIN2_LIMIT);
data->ext2_temp =
lm87_read_value(client, LM87_REG_2_5V_EXT_TEMP_2);
data->ext_temp =
lm87_read_value(client, LM87_REG_EXT_TEMP_1);
data->int_temp =
lm87_read_value(client, LM87_REG_INT_TEMP);
data->ext2_temp_max =
lm87_read_value(client, LM87_REG_2_5V_EXT_TEMP_2_HIGH);
data->ext2_temp_min =
lm87_read_value(client, LM87_REG_2_5V_EXT_TEMP_2_LOW);
data->ext_temp_max =
lm87_read_value(client, LM87_REG_EXT_TEMP_1_HIGH);
data->ext_temp_min =
lm87_read_value(client, LM87_REG_EXT_TEMP_1_LOW);
data->int_temp_max =
lm87_read_value(client, LM87_REG_INT_TEMP_HIGH);
data->int_temp_min =
lm87_read_value(client, LM87_REG_INT_TEMP_LOW);
i = lm87_read_value(client, LM87_REG_VID_FAN_DIV);
data->fan_div = (i >> 4) & 0x03;
data->fan2_div = (i >> 6) & 0x03;
data->vid = i & 0x0f;
data->vid |=
(lm87_read_value(client, LM87_REG_VID4) & 0x01)
<< 4;
data->alarms =
lm87_read_value(client, LM87_REG_INT1_STAT) +
(lm87_read_value(client, LM87_REG_INT2_STAT) << 8);
data->analog_out =
lm87_read_value(client, LM87_REG_ANALOG_OUT);
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
}
/* The next few functions are the call-back functions of the /proc/sys and
sysctl files. Which function is used is defined in the ctl_table in
the extra1 field.
Each function must return the magnitude (power of 10 to divide the date
with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
put a maximum of *nrels elements in results reflecting the data of this
file, and set *nrels to the number it actually put in it, if operation==
SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
large enough (by checking the incoming value of *nrels). This is not very
good practice, but as long as you put less than about 5 values in results,
you can assume it is large enough. */
void lm87_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
long scales[6] = { 250, 270,
#ifdef LM87_5V_VCC
500,
#else
330,
#endif
500, 1200, 270 };
struct lm87_data *data = client->data;
int nr = ctl_name - LM87_SYSCTL_IN0;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
lm87_update_client(client);
results[0] = (data->in_min[nr] * scales[nr] + 96) / 192;
results[1] = (data->in_max[nr] * scales[nr] + 96) / 192;
results[2] = (data->in[nr] * scales[nr] + 96) / 192;
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->in_min[nr] = (results[0] * 192 + scales[nr] / 2)
/ scales[nr];
lm87_write_value(client, LM87_REG_IN_MIN(nr),
data->in_min[nr]);
}
if (*nrels_mag >= 2) {
data->in_max[nr] = (results[1] * 192 + scales[nr] / 2)
/ scales[nr];
lm87_write_value(client, LM87_REG_IN_MAX(nr),
data->in_max[nr]);
}
}
}
#if defined (LM87_AIN1) || defined (LM87_AIN2)
void lm87_ain(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm87_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm87_update_client(client);
if (ctl_name == LM87_SYSCTL_AIN1) {
results[0] = data->ain1_min;
results[1] = data->ain1_max;
results[2] = data->ain1;
} else {
results[0] = data->ain2_min;
results[1] = data->ain2_max;
results[2] = data->ain2;
}
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
if (ctl_name == LM87_SYSCTL_AIN1) {
data->ain1_min = results[0];
lm87_write_value(client, LM87_REG_AIN1_LOW,
data->ain1_min);
} else {
data->ain2_min = results[0];
lm87_write_value(client, LM87_REG_AIN2_LOW,
data->ain2_min);
}
}
if (*nrels_mag >= 2) {
if (ctl_name == LM87_SYSCTL_AIN1) {
data->ain1_max = results[1];
lm87_write_value(client, LM87_REG_FAN1_AIN1_LIMIT,
data->ain1_max);
} else {
data->ain2_max = results[1];
lm87_write_value(client, LM87_REG_FAN2_AIN2_LIMIT,
data->ain2_max);
}
}
}
}
#endif
void lm87_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm87_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm87_update_client(client);
if (ctl_name == LM87_SYSCTL_FAN1) {
results[0] = FAN_FROM_REG(data->fan_min,
DIV_FROM_REG(data->fan_div));
results[1] = FAN_FROM_REG(data->fan,
DIV_FROM_REG(data->fan_div));
} else {
results[0] = FAN_FROM_REG(data->fan2_min,
DIV_FROM_REG(data->fan2_div));
results[1] = FAN_FROM_REG(data->fan2,
DIV_FROM_REG(data->fan2_div));
}
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 0) {
if (ctl_name == LM87_SYSCTL_FAN1) {
data->fan_min = FAN_TO_REG(results[0],
DIV_FROM_REG
(data->fan_div));
lm87_write_value(client, LM87_REG_FAN1_AIN1_LIMIT,
data->fan_min);
} else {
data->fan2_min = FAN_TO_REG(results[0],
DIV_FROM_REG
(data->fan2_div));
lm87_write_value(client, LM87_REG_FAN2_AIN2_LIMIT,
data->fan2_min);
}
}
}
}
void lm87_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm87_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 1;
else if (operation == SENSORS_PROC_REAL_READ)
{
lm87_update_client(client);
/* find out which temp. is being requested */
if (ctl_name == LM87_SYSCTL_TEMP3)
{
results[0] = TEMP_FROM_REG(data->ext2_temp_max);
results[1] = TEMP_FROM_REG(data->ext2_temp_min);
results[2] = TEMP_FROM_REG(data->ext2_temp);
}
else if(ctl_name == LM87_SYSCTL_TEMP2)
{
results[0] = TEMP_FROM_REG(data->ext_temp_max);
results[1] = TEMP_FROM_REG(data->ext_temp_min);
results[2] = TEMP_FROM_REG(data->ext_temp);
}
else if(ctl_name == LM87_SYSCTL_TEMP1)
{
results[0] = TEMP_FROM_REG(data->int_temp_max);
results[1] = TEMP_FROM_REG(data->int_temp_min);
results[2] = TEMP_FROM_REG(data->int_temp);
}
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
if (ctl_name == LM87_SYSCTL_TEMP3) {
data->ext2_temp_max = TEMP_LIMIT_TO_REG(results[0]);
lm87_write_value(client, LM87_REG_2_5V_EXT_TEMP_2_HIGH,
data->ext2_temp_max);
}
if (ctl_name == LM87_SYSCTL_TEMP2) {
data->ext_temp_max = TEMP_LIMIT_TO_REG(results[0]);
lm87_write_value(client, LM87_REG_EXT_TEMP_1_HIGH,
data->ext_temp_max);
}
if (ctl_name == LM87_SYSCTL_TEMP1) {
data->int_temp_max = TEMP_LIMIT_TO_REG(results[0]);
lm87_write_value(client, LM87_REG_INT_TEMP_HIGH,
data->int_temp_max);
}
}
if (*nrels_mag >= 2) {
if (ctl_name == LM87_SYSCTL_TEMP3) {
data->ext2_temp_min = TEMP_LIMIT_TO_REG(results[1]);
lm87_write_value(client, LM87_REG_2_5V_EXT_TEMP_2_LOW,
data->ext2_temp_min);
}
if (ctl_name == LM87_SYSCTL_TEMP2) {
data->ext_temp_min = TEMP_LIMIT_TO_REG(results[1]);
lm87_write_value(client, LM87_REG_EXT_TEMP_1_LOW,
data->ext_temp_min);
}
if (ctl_name == LM87_SYSCTL_TEMP1) {
data->int_temp_min = TEMP_LIMIT_TO_REG(results[1]);
lm87_write_value(client, LM87_REG_INT_TEMP_LOW,
data->int_temp_min);
}
}
}
}
void lm87_alarms(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm87_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm87_update_client(client);
results[0] = data->alarms;
*nrels_mag = 1;
}
}
void lm87_fan_div(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results)
{
/* This gets a little hairy depending on the hardware config */
struct lm87_data *data = client->data;
int old;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm87_update_client(client);
#ifndef LM87_AIN1
results[0] = DIV_FROM_REG(data->fan_div);
# ifndef LM87_AIN2
results[1] = DIV_FROM_REG(data->fan2_div);
*nrels_mag = 2;
# else
*nrels_mag = 1;
# endif
#else /* Must be referring to fan 2 */
results[0] = DIV_FROM_REG(data->fan2_div);
*nrels_mag = 1;
#endif
} else if (operation == SENSORS_PROC_REAL_WRITE) {
old = lm87_read_value(client, LM87_REG_VID_FAN_DIV);
/* Note: it's OK to change fan2 div even if fan2 isn't enabled */
#ifndef LM87_AIN1
if (*nrels_mag >= 2) {
data->fan2_div = DIV_TO_REG(results[1]);
old = (old & 0x3f) | (data->fan2_div << 6);
}
if (*nrels_mag >= 1) {
data->fan_div = DIV_TO_REG(results[0]);
old = (old & 0xcf) | (data->fan_div << 4);
lm87_write_value(client, LM87_REG_VID_FAN_DIV, old);
}
#else /* Must be referring to fan 2 */
if (*nrels_mag >= 1) {
data->fan2_div = DIV_TO_REG(results[0]);
old = (old & 0xcf) | (data->fan2_div << 6);
lm87_write_value(client, LM87_REG_VID_FAN_DIV, old);
}
#endif
}
}
void lm87_analog_out(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results)
{
struct lm87_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm87_update_client(client);
results[0] = data->analog_out;
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->analog_out = results[0];
lm87_write_value(client, LM87_REG_ANALOG_OUT,
data->analog_out);
}
}
}
void lm87_vid(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm87_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 3;
else if (operation == SENSORS_PROC_REAL_READ) {
lm87_update_client(client);
results[0] = vid_from_reg(data->vid, data->vrm);
*nrels_mag = 1;
}
}
void lm87_vrm(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm87_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 1;
else if (operation == SENSORS_PROC_REAL_READ) {
results[0] = data->vrm;
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1)
data->vrm = results[0];
}
}
static int __init sm_lm87_init(void)
{
printk(KERN_INFO "lm87.o version %s (%s)\n", LM_VERSION, LM_DATE);
return i2c_add_driver(&LM87_driver);
}
static void __exit sm_lm87_exit(void)
{
i2c_del_driver(&LM87_driver);
}
MODULE_LICENSE("GPL");
MODULE_AUTHOR
("Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, "
"Mark Studebaker <mdsxyz123@yahoo.com>, and Stephen Rousset <stephen.rousset@rocketlogix.com>");
MODULE_DESCRIPTION("LM87 driver");
module_init(sm_lm87_init);
module_exit(sm_lm87_exit);
Reference in new issue View Git Blame Copy Permalink