Merge pull request #1665 from cesanta/esp32-device-dashboard

Changed README to point to new tutorial location

examples/esp32/device-dashboard/Makefile

@@ -2,19 +2,37 @@ THISDIR = $(realpath $(CURDIR))
 ROOTDIR = $(realpath $(CURDIR)/../../..)
 DOCKER ?= docker run --rm $(DA) -v $(ROOTDIR):$(ROOTDIR) -w $(THISDIR) espressif/idf
 CMD ?= idf.py build
+PORT ?= /dev/ttyUSB0
 
 all: example
 
 example:
 	true
 
-build: main/main.c Makefile
+build: Makefile $(wildcard main/*)
 	$(DOCKER) $(CMD)
 
-COMPORT ?= /dev/cu.SLAB_USBtoUART
-ESPTOOL ?= esptool.py
 flash:
-	cd build && $(ESPTOOL) --chip esp32 -p $(COMPORT) -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 40m --flash_size 2MB 0x8000 partition_table/partition-table.bin 0x1000 bootloader/bootloader.bin 0x100000 mongoose-esp32-example.bin
+flash: CMD = idf.py flash
+flash: DA = --device $(PORT)
+flash: build
+
+.PHONY: build
+
+dashboard.hex: build
+	esputil mkhex \
+		0x8000 build/partition_table/partition-table.bin \
+		0x1000 build/bootloader/bootloader.bin \
+		0x100000 build/mongoose-esp32-example.bin > $@
+
+flash2: dashboard.hex
+	esputil -p $(PORT) -b 921600 -fp 0x220 flash dashboard.hex
+	esputil -p $(PORT) monitor
+
+ESPTOOL ?= esptool.py
+
+flash3:
+	cd build && $(ESPTOOL) --chip esp32 -p $(PORT) -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 40m --flash_size 2MB 0x8000 partition_table/partition-table.bin 0x1000 bootloader/bootloader.bin 0x100000 mongoose-esp32-example.bin
 
 clean:
 	$(DOCKER) rm -rf build sdkconfig

examples/esp32/device-dashboard/README.md

@@ -1 +1 @@
-See detailed tutorial at https://mongoose.ws/tutorials/esp32/
+See detailed tutorial at https://mongoose.ws/tutorials/esp32/device-dashboard