mirror of
https://github.com/cesanta/mongoose.git
synced 2026-11-02 13:20:51 +00:00
148 lines
3.7 KiB
Markdown
148 lines
3.7 KiB
Markdown
# Mongoose CubeMX pack
|
|
|
|
This pack provides an easy to use CubeMX integration.
|
|
|
|
## Mongoose Networking Core
|
|
|
|
This module installs Mongoose Library itself: `mogoose.c`, `mongoose.h` and
|
|
`mongoose_config.h`. It is required for any other module to work. Below are
|
|
the steps to make it work with you CubeMX application:
|
|
|
|
## Configure peripherals
|
|
|
|
In CubeMX, configure USART (for debug), RNG (for TLS), ETH.
|
|
|
|
## Enable debug logs
|
|
|
|
Open `Core/Src/main.c` and add this snippet:
|
|
|
|
```c
|
|
/* USER CODE BEGIN 0 */
|
|
int _write(int fd, unsigned char *buf, int len) {
|
|
HAL_UART_Transmit(&huart3, buf, len, HAL_MAX_DELAY);
|
|
return len;
|
|
}
|
|
/* USER CODE END 0 */
|
|
```
|
|
|
|
## Call Mongoose
|
|
|
|
Open `Core/Src/main.c`. Add at the top of the file:
|
|
|
|
```c
|
|
/* USER CODE BEGIN Includes */
|
|
#include "mongoose.h"
|
|
/* USER CODE END Includes */
|
|
```
|
|
|
|
Inside main() function:
|
|
|
|
```c
|
|
Inside the `main()` function:
|
|
|
|
```c
|
|
/* USER CODE BEGIN WHILE */
|
|
struct mg_mgr mgr;
|
|
mg_mgr_init(&mgr);
|
|
|
|
while (1)
|
|
{
|
|
mg_mgr_poll(&mgr, 1);
|
|
/* USER CODE END WHILE */
|
|
```
|
|
|
|
This starts the TCP/IP stack. In the serial console logs, you should
|
|
see something like this:
|
|
|
|
```text
|
|
0 2 mongoose.c:26153:mg_phy_init PHY ID: 0x07 0xc131 (LAN87x)
|
|
6 2 mongoose.c:5834:mg_mgr_init Driver: stm32h, MAC: 2a:37:94:03:d5:74
|
|
d 3 mongoose.c:5841:mg_mgr_init MG_IO_SIZE: 512, TLS: builtin
|
|
13 3 mongoose.c:5758:mg_listen 1 0 http://0.0.0.0:80
|
|
19 1 mongoose.c:6260:onstatechange Link down
|
|
7d6 3 mongoose.c:28424:mg_tcpip_driv Link is 100M full-duplex
|
|
7db 3 mongoose.c:6404:tx_dhcp_discov DHCP discover sent. Our MAC: 2a:37:94:03:d5:74
|
|
831 3 mongoose.c:6382:tx_dhcp_reques DHCP req sent
|
|
836 2 mongoose.c:6559:rx_dhcp_client Lease: 3600 sec (3602)
|
|
83c 2 mongoose.c:6249:onstatechange READY, IP: 192.168.2.31
|
|
842 2 mongoose.c:6250:onstatechange GW: 192.168.2.1
|
|
847 2 mongoose.c:6253:onstatechange MAC: 2a:37:94:03:d5:74
|
|
```
|
|
|
|
Now, you should be able to ping your device.
|
|
However, it runs no network services.
|
|
|
|
## Add hello world HTTP server
|
|
|
|
Let's add the simplest web server possible. After the `mg_mgr_init()`
|
|
call, add one more line to start the HTTP listener:
|
|
|
|
```c
|
|
mg_mgr_init(&mgr);
|
|
mg_http_listen(&mgr, "http://0.0.0.0:80", http_ev_handler, NULL);
|
|
```
|
|
|
|
And after the `_write()` override, add this HTTP event handler function:
|
|
|
|
```c
|
|
static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
|
|
if (ev == MG_EV_HTTP_MSG) {
|
|
mg_http_reply(c, 200, "", "Hi from Mongoose! Tick %lu\r\n", HAL_GetTick());
|
|
}
|
|
}
|
|
```
|
|
|
|
Rebuild, reflash your board, open the device's IP address in the browser,
|
|
and see the message displayed, something like:
|
|
|
|
```text
|
|
Hi from Mongoose! Tick 38187
|
|
```
|
|
|
|
## Add full device dashboard
|
|
|
|
Enable "Mongoose Web Device Dashboard" component in CubeMX. Regenerate code.
|
|
|
|
Remove the hello world server if you added it. Modify your while loop
|
|
to look like this:
|
|
|
|
```c
|
|
/* USER CODE BEGIN WHILE */
|
|
struct mg_mgr mgr;
|
|
mg_mgr_init(&mgr);
|
|
mg_dash_init(&mgr);
|
|
|
|
while (1)
|
|
{
|
|
mg_mgr_poll(&mgr, 1);
|
|
mg_dash_poll(&mgr);
|
|
/* USER CODE END WHILE */
|
|
```
|
|
|
|
Rebuild, reflash your board and enjoy the fully functional device dashboard
|
|
that you can tailor to your firmware.
|
|
|
|
## Add MQTT Client
|
|
|
|
Enable "Mongoose MQTT Client" component in CubeMX. Regenerate code.
|
|
|
|
Add MQTT init and poll to your while loop:
|
|
|
|
```c
|
|
/* USER CODE BEGIN WHILE */
|
|
struct mg_mgr mgr;
|
|
mg_mgr_init(&mgr);
|
|
mg_mqtt_init(&mgr);
|
|
|
|
while (1)
|
|
{
|
|
mg_mgr_poll(&mgr, 1);
|
|
mg_mqtt_poll(&mgr);
|
|
/* USER CODE END WHILE */
|
|
```
|
|
|
|
Rebuild, reflash your board. This MQTT Client connects to the
|
|
HiveMQ public MQTT broker - see `mongoose_mqtt.c` file for details.
|
|
Also it add a JSON-RPC "ota.update" function via MQTT, so you can
|
|
update your firmware over MQTT, see https://mongoose.ws/mqtt/
|