mirror of
https://github.com/cesanta/mongoose.git
synced 2026-10-31 13:00:49 +00:00
32 lines
1.3 KiB
Markdown
32 lines
1.3 KiB
Markdown
# Nucleo-H723ZG Mongoose Integration
|
|
|
|
This guide explains how to bring up a production-grade Web UI dashboard on the
|
|
STM32 Nucleo-H723ZG development board.
|
|
|
|
A pre-configured, ready-to-run project zip is available for download at
|
|
https://mongoose.ws.
|
|
|
|
To integrate the Web UI dashboard into an existing CubeMX project, or to create a
|
|
new project from scratch:
|
|
|
|
1. Configure the peripherals (described below).
|
|
2. Regenerate your project code and integrate Mongoose core by following
|
|
https://mongoose.ws/docs/guides/stm32-tcpip-stack/.
|
|
3. Add the Web UI dashboard by following
|
|
https://mongoose.ws/docs/guides/web-dashboard-guide/.
|
|
|
|
## Configure peripherals
|
|
|
|
An `.ioc` file is included in this directory for your reference. It was created
|
|
using the following steps:
|
|
|
|
- Open CubeMX. If you are starting a new project, select the STM32H723ZG
|
|
microcontroller and create a new project.
|
|
- In Clock Configuration, set the maximum clock frequency to 550 MHz.
|
|
- In the MCU pinout view, set pins PB0, PE1, and PB14 to GPIO_Output mode.
|
|
- In Pinout & Configuration / Connectivity, enable USART3 in asynchronous mode.
|
|
Configure pins PD8 and PD9 for USART.
|
|
- In Pinout & Configuration / Connectivity, enable ETH in RMII mode and set pins
|
|
PA1, PA2, PA7, PC1, PC4, PC5, PB13, PG11, and PG13 for Ethernet.
|
|
- In the "Project Manager", set heap size to 0x10000, and stack size to 0x2000
|