bob: added comments to via686 section

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@831 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Bob Dougherty committed 2000-07-05 00:45:01 +00:00
1 parent 47a3491775
commit 1cdad3d31a
1 file changed
+13 -2
+13 -2
View File
@@ -497,8 +497,11 @@ chip "via686a-*"
# says to what your BIOS says when you boot up), please let us know so we can
# improve.
# On the Tyan S1598, the 2.5V sensor reads 0 and is not displayed in the BIOS,
# so you may want to ignore it here.
# On the Tyan S1598, the 2.5V sensor reads 0 and is not displayed in the BIOS.
# Also, Linas Vepstas <linas@linas.org> reports that this sensor shows
# nothing of interest on the Abit KA7 (Athalon), and is also not displayed
# in the BIOS. So, if you have either of these boards may want to uncomment
# the 'ignore 2.5V' line below.
label "2.0V" "CPU core"
label "2.5V" "+2.5V"
@@ -510,9 +513,17 @@ chip "via686a-*"
label fan1 "CPU Fan"
label fan2 "P/S Fan"
# VIA suggests that temp3 is an internal temp sensor for the 686a. However,
# on the Tyan S1598 as well as the Abit KA7 (Athalon), the absolute values
# of the readings from that sensor are not valid. The readings do seem to
# correlate with temp changes, but the conversion factor may be quite
# different from temp1 & temp2 (as noted above, VIA has not provided
# conversion info). So, you may wish to 'ignore temp3'.
label temp1 "SYS Temp"
label temp2 "CPU Temp"
label temp3 "SBr Temp"
#ignore temp3
# Set your CPU core limits here. For the other voltage sensors, the
# built-in defaults should be fine.