Add ICH8 support. 2.6 backport

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3304 7894878c-1315-0410-8ee3-d5d059ff63e0

CHANGES

@@ -13,6 +13,7 @@ lm_sensors CHANGES file
   Module i2c-amd756-s4882: Improve static semaphore initialization
                            (2.6 backport)
   Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
+                   Add ICH8 support (2.6 backport)
   Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
   Module w83781d: Use real-time alarm registers when possible (2.6 backport)
   Program decode-dimms.pl: Decode depending on the memory type

doc/busses/i2c-i801

@@ -12,9 +12,9 @@ Supported adapters:
   * Intel 82801CA/CAM (ICH3)
   * Intel 82801DB (ICH4)
   * Intel 82801EB/ER (ICH5)
-  * Intel 6300ESB
+  * Intel 6300ESB/ESB2
   * Intel 82801FB/FR/FW/FRW (ICH6)
-  * Intel ICH7
+  * Intel ICH7/ICH8
     Datasheets: Publicly available at the Intel website
 
 Authors: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock

kernel/busses/i2c-i801.c

@@ -32,6 +32,8 @@
     ICH6		266A   ("")
     ICH7		27DA   ("")
     ESB2 		269B   ("")
+    ICH8		283E   ("")
+
     This driver supports several versions of Intel's I/O Controller Hubs (ICH).
     For SMBus support, they are similar to the PIIX4 and are part
     of Intel's '810' and other chipsets.
@@ -91,6 +93,11 @@
 #define PCI_DEVICE_ID_INTEL_ICH7_17	0x27da
 #endif
 
+/* ICH8 is undefined */
+#ifndef PCI_DEVICE_ID_INTEL_ICH8_5
+#define PCI_DEVICE_ID_INTEL_ICH8_5	0x283e
+#endif
+
 #ifdef I2C_CLIENT_PEC
 #define HAVE_PEC
 #endif
@@ -169,7 +176,8 @@ static int i801_setup(struct pci_dev *dev)
 	    dev->device == PCI_DEVICE_ID_INTEL_ESB_4 ||
 	    dev->device == PCI_DEVICE_ID_INTEL_ESB2_17 ||	
 	    dev->device == PCI_DEVICE_ID_INTEL_ICH6_16 ||
-	    dev->device == PCI_DEVICE_ID_INTEL_ICH7_17)
+	    dev->device == PCI_DEVICE_ID_INTEL_ICH7_17 ||
+	    dev->device == PCI_DEVICE_ID_INTEL_ICH8_5)
 		isich4 = 1;
 	else
 		isich4 = 0;
@@ -665,6 +673,12 @@ static struct pci_device_id i801_ids[] __devinitdata = {
 		.subvendor =	PCI_ANY_ID,
 		.subdevice =	PCI_ANY_ID,
 	},
+	{
+		.vendor =	PCI_VENDOR_ID_INTEL,
+		.device =	PCI_DEVICE_ID_INTEL_ICH8_5,
+		.subvendor =	PCI_ANY_ID,
+		.subdevice =	PCI_ANY_ID,
+	},
 	{ 0, }
 };