add support for 810E (PCI 0x7125)

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1281 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed 2002-01-05 17:39:11 +00:00
1 parent b426711ae0
commit 774b145b30
3 files changed
+13 -10

No files matched your search

+4 -3
View File
@@ -20,9 +20,10 @@ ask CVS about it:
2.6.3 (2001????)
File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3
Library: Add PCF8591 and W83697HF support; fix w83* fan_min computes
Module i2c-amd756: Add support for AMD768
Module i2c-piix4: Check for uninitialized base address
Module fscscy: implement min/max for voltages and fans
Module i2c-amd756: Add support for AMD768
Module i2c-i810: Add support for 810E
Module i2c-piix4: Check for uninitialized base address
Module pcf8591: new
Module w83781d: Add W83697HF support
Program i2cdump: Add i2c block read capability
@@ -31,7 +32,7 @@ ask CVS about it:
Program rrd: Install summ_week.cgi
Program sensors: Add PCF8591 and W83697HF support,
clean up chassis intrusion prints
Program sensors-detect: Add several Nvidia chips, add PCF8591,
Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E,
fix Via686a and it87 detection,
add AMD768, IPMI-BMC-KCS and -SMIC,
fix uninitialized values, it87 beats lm78
+7 -7
View File
@@ -3,7 +3,7 @@ Kernel driver `i2c-i810.o'
Status: Stable
Supported adapters:
* Intel 82810, 82810-DC100, and 82815 (GMCH)
* Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH)
Author: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock
<phil@netroedge.com>,
@@ -42,20 +42,20 @@ Stability
---------
Apparently stable.
Supported Devices
-----------------
Specifically, this driver was written and tested on the '3dfx Voodoo3 AGP
3000' which has a tv-out feature (s-video or composite). According to the
docs and discussions, this code should work for any Voodoo3 based cards as
well as Voodoo Banshee based cards. The DDC interface has been tested
on a Voodoo Banshee card.
See above.
Features
--------
Both busses use the i2c-algo-bit driver for 'bit banging' and support
for specific transactions is provided by i2c-algo-bit.
Issues
------
If you enable bus testing in i2c-algo-bit (insmod i2c-algo-bit bit_test=1),
the test may fail and the i2c-i810 driver won't be inserted.
the test may fail; if so, the i2c-i810 driver won't be inserted.
However, we think this has been fixed.
+2
View File
@@ -30,6 +30,7 @@
SUPPORTED DEVICES PCI ID
i810AA 7121
i810AB 7123
i810E 7125
i815 1132
*/
@@ -60,6 +61,7 @@ MODULE_LICENSE("GPL");
static int i810_supported[] = {PCI_DEVICE_ID_INTEL_82810_IG1,
PCI_DEVICE_ID_INTEL_82810_IG3,
0x7125,
PCI_DEVICE_ID_INTEL_82815_2,
0 };