Updates to the adm1025-* section.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1913 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Jean Delvare committed 2003-07-29 10:27:36 +00:00
1 parent f7b40f84b3
commit 93c5a30906
1 file changed
+16 -7
+16 -7
View File
@@ -198,6 +198,7 @@
# This is a library dependency.
# A 'set fan1_div' statement must go before a 'set fan1_min' statement,
# because the driver uses the divisor in calculating the minimum.
# Also, one should set vrm prior to using vid in any formula.
#
#
# BUS LINES
@@ -1039,16 +1040,16 @@ chip "mtp008-*"
# ignore temp3
chip "adm1025-*"
#
# The ADM1025 has integrated scaling resistors, rather
# than external resistors common to most sensor devices.
# These apply to the first 6 voltage inputs in0-in5
# (+2.5, VCore, +3.3, +5, 12, VCC). As the scaling is fixed inside
# These apply to the 6 voltage inputs in0-in5 (+2.5V, VCore,
# +3.3V, +5V, +12V, VCC). As the scaling is fixed inside
# the chip for these inputs, it is fairly certain that the
# motherboard connections match these labels, and that the
# driver computations are correct. Therefore they do not need to
# be overridden here.
#
label in0 "+2.5V"
label in1 "VCore"
label in2 "+3.3V"
@@ -1056,13 +1057,21 @@ chip "adm1025-*"
label in4 "+12V"
label in5 "VCC"
label temp1 "SYS Temp"
label temp2 "CPU Temp"
# Depending on how your chipset is hardwired, you may or may not have
# +12V readings (will show as 0.0V if you don't have it).
# ignore in4
# temp minimums should be renamed from _hyst to _min!!!
# VCC is the power-supply voltage of the ADM1025 chipset, generally
# redundant with +3.3V so you may want to hide it.
# ignore in5
label temp1 "CPU Temp"
label temp2 "M/B Temp"
# adjust this if your vid is wrong; see doc/vid
set vrm 9.0
# Tolerate a 5% deviance for CPU power-supply (default is 10%)
set in1_min vid * 0.95
set in1_max vid * 1.05