Merge pull request 'Tiny cleanup' (#361) from a1346054/fixes into master

Reviewed-on: http://localhost:8888/hramrach/lm-sensors/pulls/361

CHANGES

@@ -87,7 +87,7 @@ git HEAD
                   and LM95235
                   Add detection of NCT7802Y
                   Print kernel version and processor information
-                  Add detection of NCT6792D 
+                  Add detection of NCT6792D
                   Add reference to nct6683 driver
                   Show that NCT6102D/6104D/6106D are supported by nct6775 driver
                   Show NCT5573D as compatible to NCT6776F with same chip ID
@@ -380,7 +380,7 @@ git HEAD
                    Move help section to sensors.conf.5
                    Add a section for the Asus/Fintek F8000
   sensors-detect: Fix detection of ADT7463 and LM96000
-                  Add VIA VX800/VX820 SMBus support 
+                  Add VIA VX800/VX820 SMBus support
                   Fix detection of Intel 5000 series FB-DIMM AMB
                   Fix detection of ADT7462
                   Fix detection of SMSC LPC47M292
@@ -530,7 +530,7 @@ git HEAD
                   Mention the f75375s driver
                   Add SMSC LPC47B367-NC detection (no sensors)
                   Reduce w83781d/lm78 I2C address probing range
-                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection 
+                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
 
 3.0.0-rc3 (2007-10-28)
   libsensors: Add a default configuration file
@@ -563,7 +563,7 @@ git HEAD
            Better handling of the fault flags
   sensors-conf-convert: Add a short help text
   sensors-detect: Fix SMSC SCH311x detection
-                  Add AMD K10 CPU sensor detection 
+                  Add AMD K10 CPU sensor detection
 
 3.0.0-rc1 (2007-09-25)
   Initial release

COPYING

@@ -1,12 +1,12 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
-			    Preamble
+                            Preamble
 
   The licenses for most software are designed to take away your
 freedom to share and change it.  By contrast, the GNU General Public
@@ -56,7 +56,7 @@ patent must be licensed for everyone's free use or not licensed at all.
   The precise terms and conditions for copying, distribution and
 modification follow.
 
-		    GNU GENERAL PUBLIC LICENSE
+                    GNU GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License applies to any program or other work which contains
@@ -255,7 +255,7 @@ make exceptions for this.  Our decision will be guided by the two goals
 of preserving the free status of all derivatives of our free software and
 of promoting the sharing and reuse of software generally.
 
-			    NO WARRANTY
+                            NO WARRANTY
 
   11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
 FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
@@ -277,9 +277,9 @@ YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
 PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGES.
 
-		     END OF TERMS AND CONDITIONS
+                     END OF TERMS AND CONDITIONS
 
-	    How to Apply These Terms to Your New Programs
+            How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it

Makefile

@@ -76,7 +76,7 @@ BINDIR := $(PREFIX)/bin
 SBINDIR := $(PREFIX)/sbin
 
 # You should not need to change this. It is the basic directory into which
-# include files will be installed. The actual directory will be 
+# include files will be installed. The actual directory will be
 # $(INCLUDEDIR)/sensors for library include files.
 INCLUDEDIR := $(PREFIX)/include
 LIBINCLUDEDIR := $(INCLUDEDIR)/sensors
@@ -111,9 +111,9 @@ BUILD_STATIC_LIB := 1
 
 # Within each Module.mk, rules and dependencies can be added to targets
 # all, install and clean. Use double colons instead of single ones
-# to do this. 
+# to do this.
 
-# The subdirectories we need to build things in 
+# The subdirectories we need to build things in
 SRCDIRS := lib prog/detect prog/pwm \
            prog/sensors ${PROG_EXTRA:%=prog/%} etc
 # Only build isadump and isaset on x86 machines.
@@ -174,7 +174,7 @@ LIBCFLAGS := -fpic -D_REENTRANT $(ALL_CFLAGS)
 all::
 
 # Include all makefiles for sub-modules
-INCLUDEFILES := 
+INCLUDEFILES :=
 include $(patsubst %,%/Module.mk,$(SRCDIRS))
 ifneq ($(MAKECMDGOALS),clean)
 ifneq ($(MAKECMDGOALS),uninstall)

README

@@ -105,7 +105,7 @@ TROUBLESHOOTING
 lm-sensors is blamed for all kinds of problems on a regular basis.
 While it is always possible that lm-sensors does in fact have a problem,
 almost everytime the problem will be elsewhere. The most likely culprit
-for a problem is one of the kernel drivers prividing data to lm-sensors
+for a problem is one of the kernel drivers providing data to lm-sensors
 or, rather, the sensors command (and libsensors). If you encounter problems,
 the following tests are recommended.
 
@@ -121,7 +121,7 @@ the following tests are recommended.
   with the sensors command first). Again, after identifying the offending
   driver, record and report your results to the driver maintainer.
 - If this does not help, try to run ptrace on the sensors command and/or
-  the application using libsensors. If you find any anormalies, record
+  the application using libsensors. If you find any anomalies, record
   your results and report.
 
 

doc/developers/lm_sensors.lsm

@@ -2,7 +2,7 @@ Begin4
 Title: lm_sensors
 Version: 3.6.0
 Entered-date: 2019-10-18
-Description: Hardware health monitoring package for Linux. It consists of 
+Description: Hardware health monitoring package for Linux. It consists of
              a library to allow applications to read sensors data more
              easily, and of an example program to pretty print this data.
              Also included is a fan speed control script.

doc/fan-divisors

@@ -20,7 +20,7 @@ Does my monitoring chip use fan divisors?
   16 bits, so divisors are no longer required. In that case, you won't
   see "div" values in the output of sensors, and nothing needs to be
   configured:
-  
+
   CPU1 Fan:    2160 RPM  (min =  800 RPM)
   CPU2 Fan:       0 RPM  (min =  799 RPM)  ALARM
   Front3 Fan:     0 RPM  (min =    0 RPM)

doc/fancontrol.txt

@@ -1,4 +1,3 @@
-
 fancontrol - automated software based fan speed regulation
 
 

doc/git

@@ -1,4 +1,4 @@
-Git Repository 
+Git Repository
 
 Anonymous access to our git repository is available. This means
 that users can have direct access to up-to-the-minute code.

doc/temperature-sensors

@@ -77,7 +77,7 @@ For diodes, voltage is linear with temperature.
 Winbond W83782D and W83783S
 ---------------------------
 These chips default to thermistors with Beta = 3435.
-Each sensor on the chip can be individually set to be 
+Each sensor on the chip can be individually set to be
 a diode, transistor, or thermistor.
 If the temperature reading changes much less than expected,
 the sensor type probably needs to be changed to a diode.

etc/sensors-conf-convert

@@ -425,7 +425,7 @@ if (m/^([\s#]*bus\s+"?i2c-\d+"?\s+"([^"]+)")\s+"[^"]*"/) {
 	print STDERR "Processing bus statement: $2\n" if $debug;
 
 	if ($2 eq "ISA main adapter") {
-		$_ = '';	# Drop entirely 
+		$_ = '';	# Drop entirely
 	} else {
 		$_ = "$1\n";	# Drop algorithm name
 	}

etc/sensors.conf.default

@@ -227,7 +227,7 @@ chip "smsc47m192-*"
 
 
 chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" \
-     "emc6d100-*" "emc6d102-*" "emc6d103-*" "emc6d103s-*" 
+     "emc6d100-*" "emc6d102-*" "emc6d103-*" "emc6d103s-*"
 
     label in1 "Vcore"
     label in2 "+3.3V"

lib/test/Module.mk

@@ -19,6 +19,6 @@ user :: all-lib-test
 $(LIB_TEST_DIR)/test-scanner.ro: $(LIB_DIR)/data.h $(LIB_DIR)/conf.h $(LIB_DIR)/conf-parse.h $(LIB_DIR)/scanner.h
 
 clean-lib-test:
-	$(RM) $(LIB_TEST_DIR)/*.rd $(LIB_TEST_DIR)/*.ro 
+	$(RM) $(LIB_TEST_DIR)/*.rd $(LIB_TEST_DIR)/*.ro
 	$(RM) $(LIB_TEST_TARGETS)
 clean :: clean-lib-test

lib/test/test-scanner.c

@@ -49,44 +49,44 @@ int main(void)
 			case NEG:
 				printf("NEG\n");
 				break;
-	
+
 			case EOL:
 				printf("EOL\n");
 				break;
-	
+
 			case BUS:
 				printf("BUS\n");
 				break;
-	
+
 			case LABEL:
 				printf("LABEL\n");
 				break;
-	
+
 			case SET:
 				printf("SET\n");
 				break;
-	
+
 			case CHIP:
 				printf("CHIP\n");
 				break;
-	
+
 			case COMPUTE:
 				printf("COMPUTE\n");
 				break;
-	
+
 			case IGNORE:
 				printf("IGNORE\n");
 				break;
-	
+
 			case FLOAT:
 				printf("FLOAT: %f\n", sensors_yylval.value);
 				break;
-	
+
 			case NAME:
 				printf("NAME: %s\n", sensors_yylval.name);
 				free(sensors_yylval.name);
 				break;
-	
+
 			case ERROR:
 				printf("ERROR\n");
 				break;
@@ -103,4 +103,3 @@ int main(void)
 
 	return 0;
 }
-

lib/test/test-scanner.pl

@@ -98,4 +98,3 @@ foreach $scenario (@scenarios) {
 	ok($test->diff_exact(\@stderr, \@experr, \@diff),
 		"stderr: " . $scenario->{"desc"}) or print @diff;
 }
-