mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-29 12:50:43 +00:00
add missing force_xxx documentation; work on as99127f section.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1016 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
1 parent
b5d014bd46
commit
e0ffc6af20
1 file changed
+44
-21
+44
-21
@@ -6,7 +6,7 @@ Status: W83781D support is complete and well-tested.
|
||||
W83783S support is complete but has not been well-tested.
|
||||
W83627HF support is complete but has not been well-tested.
|
||||
AS99127F support is BETA and has known problems due to lack of a
|
||||
chip datasheet. See below.
|
||||
chip datasheet. SEE BELOW.
|
||||
|
||||
Supported chips:
|
||||
* Winbond W83781D
|
||||
@@ -31,8 +31,8 @@ Supported chips:
|
||||
Datasheet: Unavailable from Asus
|
||||
|
||||
|
||||
Author: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>,
|
||||
and Mark Studebaker <mdsxyz123@yahoo.com>
|
||||
Authors: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>,
|
||||
and Mark Studebaker <mdsxyz123@yahoo.com>
|
||||
|
||||
|
||||
Module Parameters
|
||||
@@ -43,12 +43,14 @@ Module Parameters
|
||||
* force_w83781d: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs which are unquestionably assumed to contain
|
||||
a `w83781d' chip
|
||||
* force_w83782d: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs which are unquestionably assumed to contain
|
||||
a `w83782d' chip
|
||||
* force_w83783s: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs which are unquestionably assumed to contain
|
||||
a `w83783s' chip
|
||||
* force_w83782d:
|
||||
Ditto
|
||||
* force_w83783s:
|
||||
Ditto
|
||||
* force_w83627hf:
|
||||
Ditto
|
||||
* force_as99127f:
|
||||
Ditto
|
||||
* ignore: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs not to scan
|
||||
* ignore_range: short array (min = 1, max = 48)
|
||||
@@ -140,29 +142,50 @@ hardware registers are read whenever any data is read (unless it is less
|
||||
than 1.5 seconds since the last update). This means that you can easily
|
||||
miss once-only alarms.
|
||||
|
||||
The W8378* only updates its values each 1.5 seconds; reading it more often
|
||||
The chips only update values each 1.5 seconds; reading them more often
|
||||
will do no harm, but will return 'old' values.
|
||||
|
||||
|
||||
W8378* PROBLEMS
|
||||
-----------------
|
||||
Known problems:
|
||||
- Some chips are misidentified.
|
||||
This is caused by the chip having the wrong WCHIPID register
|
||||
value, so there is no fix. The workaround is to use the
|
||||
force_CHIP parameter.
|
||||
(modprobe w83781d force_CHIP=BUS,0x2d where CHIP is the chip name
|
||||
and BUS is your i2c bus number)
|
||||
|
||||
|
||||
AS99127F PROBLEMS
|
||||
-----------------
|
||||
The as99127f support was developed without the benefit of a datasheet.
|
||||
In most cases it is treated as a w83781d.
|
||||
This support is BETA. One user has reported problems with fans stopping
|
||||
This support will be BETA until a datasheet is released.
|
||||
One user has reported problems with fans stopping
|
||||
occasionally.
|
||||
|
||||
Known problems:
|
||||
- -12V readings a little high (-9.5V to -10.5V)
|
||||
- Problems with diode/thermistor settings (supported?)
|
||||
- fan_div register may not really be fan_div.
|
||||
- One user reports fans stopping under high server load.
|
||||
|
||||
These will not be fixed unless we get a datasheet.
|
||||
If you have problems, please lobby Asus to release a datasheet.
|
||||
|
||||
Note that the individual beep bits are inverted from the other chips.
|
||||
That is, in the second entry in the 'beep' file, a '1' bit means
|
||||
disable, not enable.
|
||||
disable, not enable. This may be changed in the future.
|
||||
|
||||
Known problems:
|
||||
- Problems with diode/thermistor settings (supported?)
|
||||
- fan_div register may not really be fan_div.
|
||||
- One user reports fans stopping under high server load.
|
||||
- Some as99127f chips are misidentified as a w83781d or w83782d.
|
||||
This is caused by the chip having the wrong WCHIPID register
|
||||
value, so there is no fix. The workaround is to use the
|
||||
force_as99127f parameter.
|
||||
(modprobe w83781d force_as99127f=BUS,0x2d where BUS is your i2c bus number)
|
||||
|
||||
These will not be fixed unless we get a datasheet.
|
||||
If you have problems, please lobby Asus to release a datasheet.
|
||||
Unfortunately several others have without success.
|
||||
Please do not send mail to us asking for better as99127f support.
|
||||
We have done the best we can without a datasheet.
|
||||
Please do not send mail to the author or the sensors group asking for
|
||||
a datasheet or ideas on how to convince Asus. We can't help.
|
||||
|
||||
|
||||
Chip Features
|
||||
|
||||
Reference in new issue
Block a user