`which` is an external command which isn't required by POSIX.
Debian and other distributions (like Gentoo!) are looking
to drop it from their base set of packages.
Switch to `command -v` which should always work instead.
Signed-off-by: Sam James <sam@gentoo.org>
This patch adds support for the ASUS M5A97 (not R2.0, the original)
motherboard.
The labels map exactly to the BIOS labels for consistency sake.
The CPU and VDDA voltage limits are the absolute minimum and maximum
values the motherboard regulators can supply. Users can always fine-tune
these to their own preference if so desired.
Found values where compared against bios values. The bios does have some
extra settable voltages, but those are not affecting the ignore sensors.
Maybe the Asus software has names/formulas for them, but as this is
Windows only software, not usable.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Only apply conversion from Celsius to Fahrenheit on temperature values.
Leave other sensor readings as they were returned.
Fixes#357
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
The json format requires that the last entry of a dictionary does not
have a trailing ','. To avoid generating invalid json output, check that
there are features to list before emitting the trailing ','.
This issue is present when a chip exists but all its sensors are
ignored:
{
"example-device" : {
"Adapter": "example adapter",
}
}
The corrected output is:
{
"example-device" : {
"Adapter": "example adapter"
}
}
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
If sensor doesn't return any value (in my case it happen when fan got broken - look below) whole script gets messed up. "cut" latter in the script assume there are more values in $GOODFAN then there are really and "cut -d' ' -f$count" doesn't return proper value.
root@yaro-desktop2:/sys/class/hwmon# cat hwmon0/fan1_input
cat: hwmon0/fan1_input: Bad argument
root@yaro-desktop2:/sys/class/hwmon#
Currently sensord supports temp alarm and temp max alarm.
Add support of emergency alarm to allow alerting when an
emergency alarm is signalled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Enable sensors-detect support for AMD Zen3 (Family 19h) CPUs. This PCI ID
is derived from Linux kernel PCI_DEVICE_ID_AMD_19H_DF_F3.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
ACPI hwmon sensor driver name has a different format such as
APMC0D29:00
APMC0D29:01
compared with DTB. This patch supports this format and gives
the correct device address as below
apm_xgene-isa-0000 => APMC0D29:00
Adapter: ISA adapter
SoC Temperature: +35.0°C
CPU power: 11.00 W
IO power: 20.00 W
apm_xgene-isa-0001 => APMC0D29:01
Adapter: ISA adapter
SoC Temperature: +33.0°C
CPU power: 13.00 W
IO power: 23.83 W
Signed-off-by: Hoan Tran <hoan@os.amperecomputing.com>
lilinjie