We are already using mktemp elsewhere in the script, and it seems to be
more widely available than tempfile.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4153 7894878c-1315-0410-8ee3-d5d059ff63e0
For families where it makes sense (ITE, Winbond, Fintek), when we have
an unknown Super-I/O, we scan all logical devices in search of one
with the typical address for hardware monitoring (0x290). If we find
it, we let the user know there are probably sensors in the chip.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4144 7894878c-1315-0410-8ee3-d5d059ff63e0
The detection is based of the PCI device class (SMBus is 0x0c05).
This will let us spot new adapters. Of course we can't load or even
suggest a driver for an unknown adapter, but at least the user will
know there's something to be investigated, and this should help us
when users report such configurations.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4143 7894878c-1315-0410-8ee3-d5d059ff63e0
(Linux 2.6). Still fallback to /proc (Linux 2.4). sysfs provides the PCI
device domain and class, which were hard to get from /proc.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4142 7894878c-1315-0410-8ee3-d5d059ff63e0
There are too many of these, the list was not up-to-date. And there
are different drivers which can give access to their I2C busses,
we can't guess which one the user wants. It was somewhat confusing
to suggest a driver which is not in mainline anyway.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4140 7894878c-1315-0410-8ee3-d5d059ff63e0
This is needed because parse-edid is typically installed in one of these
directories, even though any user can use it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4126 7894878c-1315-0410-8ee3-d5d059ff63e0
* Kill the annoying blank space in front of half of the messages.
* Stop frightening the user with problems which might have happened some
years ago, but are very rare nowadays.
* Skip some messages on 2.6 kernels where they do not apply.
* Don't even mention i2c-dev if it is already loaded or build into the
kernel.
* Reword some messages.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4120 7894878c-1315-0410-8ee3-d5d059ff63e0
sense to try and continue as a non-root user, as we won't be able to load
modules, nor to probe i2c busses, nor to access the ISA ports. It's way
less confusing for the user to clearly state he/she needs to be root,
and stop.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4119 7894878c-1315-0410-8ee3-d5d059ff63e0
libsensors. The Linux 2.6 adm1026 driver uses the standard numebring
(from 1 to 8). Map fan0 to fan8 to make things work while keeping
confusion to the minimum (hopefully.)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4118 7894878c-1315-0410-8ee3-d5d059ff63e0
Also update to display the (beep) properly due to the fact that the
w83791d beep enable mask is different than the alarm mask.
Patch from Sven Anders and Charles Spirakis.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4096 7894878c-1315-0410-8ee3-d5d059ff63e0
we don't use SMBus transactions the adapter doesn't support. This could
be extended to the transactions used during detection itself.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4086 7894878c-1315-0410-8ee3-d5d059ff63e0
IT8712F so there's not much to do. The most significant difference is that
fan speeds are now reported as 16-bit values, without fan clock dividers.
For this reason, I made the fan_divs optional in sensors. I also made the
fans themselves optional, as I noticed that a number of motherboards don't
use (and don't enable) fan3.
I've made a separate section (chip "it8716-*") in sensors.conf.eg, because
new motherboards tend to have different wirings (e.g. negative voltage
lines are not monitored) so this will make for saner defaults.
Thanks to Stian Oksavik for testing.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4083 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fix self file name reference.
* i801_setup can be marked __devinit.
* Drop useless error local variable and label in i801_setup.
* Use symbolic names for SMBHSTCFG bits.
* Transmit the error code returned by i801_setup instead of forcing it
to an arbitrary value.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4061 7894878c-1315-0410-8ee3-d5d059ff63e0
Remove the PCI function number check when probing devices.
This check is redundant, each function has a separate PCI device
ID, so checking for that ID is sufficient.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4060 7894878c-1315-0410-8ee3-d5d059ff63e0
Two of the three poll loops have the poll and sleep swapped,
causing an extra sleep to occur after the polled condition is
fulfilled. In practice, this doubles the amount of sleep time for
every block transaction.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4059 7894878c-1315-0410-8ee3-d5d059ff63e0
430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes
were required because the base I/O address registers have changed in
these versions. Standard BARs are now being used, while the original
nForce2 chips used non-standard ones. (2.6 backport)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4054 7894878c-1315-0410-8ee3-d5d059ff63e0
refuse to load. Hopefully this will make it clearer for users, which
were often wondering why their destop or server systems were detected
as laptops.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4053 7894878c-1315-0410-8ee3-d5d059ff63e0
This fixes compilation with old kernels (2.4.20 and earlier). Thanks
to Yuan Mu for reporting.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4039 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare