Commit Graph
24 Commits
Author SHA1 Message Date
Mark D. Studebaker 8a7d9d7d07 add support for Asus ASB100 Bach. Patch from
"Mark M. Hoffman" <mhoffman@lightlink.com>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1486 7894878c-1315-0410-8ee3-d5d059ff63e0
2002-08-04 19:01:35 +00:00
Mark D. Studebaker 927aae8b81 Initialize temp1-3 to "comparator" mode so that the ALARM
indication will always be valid; it won't be cleared forever by
      reading the register. Do this by setting temp1_hyst to 127
      and programming register 4C which sets it for temps 2 and 3.
      Don't print hyst. value for temp1 in 'sensors' if == 127.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1407 7894878c-1315-0410-8ee3-d5d059ff63e0
2002-06-29 02:46:51 +00:00
Mark D. Studebaker 115f2db300 add force_subclients parameter which allows moving subclients
to different addresses; this allows initialization of two
      clients on the same i2c bus by preventing subclient address
      conflicts at 0x48 and 0x49.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1312 7894878c-1315-0410-8ee3-d5d059ff63e0
2002-02-09 16:36:54 +00:00
Mark D. Studebaker 5d4b07b1e9 add initial support for w83697hf to w83781d.
Similar to w83783s except no VID or fan3, and ISA only.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1246 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-11-21 01:01:17 +00:00
Mark D. Studebaker e7fc40b690 Add 'init' parameter to control initialization.
Use 'init=0' to skip initialization, this should fix
      those pesky PC's that crash when you load w83781d.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1209 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-10-22 01:20:48 +00:00
Mark D. Studebaker 7d6bb713fe Asus board help. Thanks
Patrick Tullmann <tullmann@cs.utah.edu>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1148 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-07-29 03:21:53 +00:00
Mark D. Studebaker e0ffc6af20 add missing force_xxx documentation; work on as99127f section.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1016 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-02-10 03:37:50 +00:00
Mark D. Studebaker 1371cc89c0 (mds) Change as99127f fan speed calculation based on actual
measurements with frequency counter. Divisor changed from
      1350000 to 810000.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@819 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-06-17 20:33:50 +00:00
Mark D. Studebaker 66113bdcd3 (mds) For as99127f, remove in7-8, sensor1-3, pwm3-4
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@807 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-05-13 17:31:11 +00:00
Mark D. Studebaker c4bf748b21 (mds) w83627hf only has 2 pwm whether on ISA or I2C bus.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@797 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-05-06 16:41:01 +00:00
Mark D. Studebaker 5c932f74fc (mds) add to list of as99127f problems.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@787 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-29 03:00:42 +00:00
Frodo Looijaard 846845204d Changed email address lm78@... to sensors@...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@738 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-02-27 00:50:28 +00:00
Mark D. Studebaker 2df6367676 (mds) add list of what doesn't work for as99127f.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@735 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-02-20 02:04:47 +00:00
Mark D. Studebaker 6340ed3175 (mds) change my email addr.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@688 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-01-08 16:48:39 +00:00
Mark D. Studebaker f6edfe75bd (mds) Add support for the Asus AS99127F. Treat as an I2C-only W83782D for now.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@614 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-10-30 21:26:21 +00:00
Mark D. Studebaker 8a1c339eb3 (mds) Claim support for LM77. Minor updates in other docs.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@610 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-10-28 00:12:52 +00:00
Mark D. Studebaker 52ede0a657 (mds) add support for beep3 register in 782d/783s/627hf.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@601 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-10-20 01:26:00 +00:00
Mark D. Studebaker 9e81117fbf (mds) Add support for w83627hf to 'sensors' program.
Assumed at this time to be identical to w83782d.
      No 627hf datasheet yet.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@526 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-08-15 21:34:21 +00:00
Frodo Looijaard db551af711 W83781D documentation update
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@411 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-04-22 13:54:49 +00:00
Mark D. Studebaker 2417cc1d40 enabled rt table for 781d by default. Left #define in in case
it proves to be noxious. Added writes for rt table. Use at own risk.
Fixed 782d fan3 bug hopefully.
Added 16,32,64,128 fan_div values for 782d/783s.
Reformatted some > 80 col. lines.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@397 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-04-17 04:20:51 +00:00
Mark D. Studebaker 3ccf39c7d0 Added sensor[1-3] to 782d/783s to select sensor type.
Added RT table read to 781d but then #undef'ed it since it was just
all 1's. Changed max entries in sensor.c to 32 bytes to handle RT table.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@335 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-03-23 21:48:19 +00:00
Mark D. Studebaker 10bf57b3e7 Documentation update for supported/unsupported clock chips.
Added some notes on w83781d.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@328 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-03-20 03:46:07 +00:00
Mark D. Studebaker 65f60a55ce update todo and notes section.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@319 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-03-17 04:45:27 +00:00
Mark D. Studebaker a2372ec989 lame description of the chips from our favorite company.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@312 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-03-14 04:00:52 +00:00