_sysctl_real
_register_entry
_proc_real
_detect
_deregister_entry
_chips_data
which were the global symbols renamed in i2c-proc.[ch] in the
i2c package.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1101 7894878c-1315-0410-8ee3-d5d059ff63e0
Leave the files there for now.
Remove old installed sensors.o in kernel/Module.mk.
sensors.c was moved to i2c-proc.c in the i2c package.
i2c-isa.h was appended to i2c.h in the i2c package.
Delete all but the SYSCTL and ALARMS definitions in sensors.h,
as the rest of the file was moved to i2c-proc.h in the i2c package.
Remove #include "i2c-isa.h" lines in all chip drivers and
in bus driver i2c-isa.c.
This all probably breaks mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1015 7894878c-1315-0410-8ee3-d5d059ff63e0
the horrible
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
(LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
They should now both work with 2.3 kernels (including 2.4 prepatches)
and very new 2.2 kernels (ie. 2.2.18 prepatches)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@933 7894878c-1315-0410-8ee3-d5d059ff63e0
Changes in sensors.c:
sensors_detect now skips addresses which are already taken. Even a
force parameter can not override this, as it could lead to major
problems.
For ISA addresses, the same is done; but the client drivers still need
a check if they claim more than one ISA address (as all of the current
ISA clients do).
Changes in chip drivers:
Removed the comment about needing address registration
Changes in i2cdetect.c:
Marks addresses which are already claimed
Changes in sensors-detect:
Warns when an address is already claimed, and skips it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@667 7894878c-1315-0410-8ee3-d5d059ff63e0
* Improved monitoring of /proc directories
Instead of doing:
proc_bus_i2c->fill_inode = &monitor_bus_i2c;
void monitor_bus_i2c(struct inode *inode, int fill)
{
if (fill)
MOD_INC_USE_COUNT;
else
MOD_DEC_USE_COUNT;
}
you can now simply set:
proc_bus_i2c->owner = THIS_MODULE;
and this is just as good!
* An old 2.3 problem seemingly never was resolved yet: instead of using
a *wait_queue directly, you have to use a wait_queue_head_t and
initialize it properly:
#if (LINUX_VERSION_CODE < 0x020301)
static struct wait_queue *pcf_wait = NULL;
#else
static wait_queue_head_t pcf_wait;
#endif
#if (LINUX_VERSION_CODE >= 0x020301)
init_waitqueue_head(&pcf_wait);
#endif
except for this, semantics remain the same (but using a plain
wait_queue_head_t instead of a pointer to a wait_queue)
* I had to change the semantics of sensors_register_entry slightly,
to make the monitoring of /proc/sys/dev/* files possible for kernels
2.3.27 and newer. It now takes an additional parameter, which you
can specify as THIS_MODULE.
* THIS_MODULE is only defined in kernels 2.3.13 and later; added
it to compat.h and the compatibility section of mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@640 7894878c-1315-0410-8ee3-d5d059ff63e0
(1.75 to 1.30 Volts) as specified in Intel document
243773302.pdf. Lower voltages are coming!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@617 7894878c-1315-0410-8ee3-d5d059ff63e0
* Removed several superfluous (struct i2c_client *) casts (they were left
from the time we had separate structs for smbus and isa)
* Removed the internal lists of registered clients
They have not been used for quite some time now, took memory space,
and limited the maximum number of clients that could be registered.
Also removed two small Makefile errors - I am happy I caught them before
the next release!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@582 7894878c-1315-0410-8ee3-d5d059ff63e0
the kernel.
* <kernel/init.h> is now included for all modules
* Initialization-time only functions and variables are marked with __init
* EXPORT_SYMBOL or EXPORT_NO_SYMBOLS declarations added
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@513 7894878c-1315-0410-8ee3-d5d059ff63e0
* i2c-isa simplified, by using the addr field in the client structure,
instead of a new field. This means we do not need `struct isa_*'
anymore
* All clients changed to reflect the new isa code. Many are much
simplified now.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@505 7894878c-1315-0410-8ee3-d5d059ff63e0
* The i2c package can no longer be compiled as part of the lm_sensors tree
* The archive of the i2c package is removed
* smbus, i2c-dev and i2c-proc modules and headers have been removed; they
are now completely integrated into the i2c package
* The fake i2c.h header has been removed; this also allowed us to remove
the ugly LM_SENSORS and TBD defines.
* A new variable I2C_HEADERS is introduced in the Makefile. This allows
us to install the i2c headers in, for example, /usr/local/include/linux.
* All files now include <linux/i2c.h> instead of "i2c.h" and "smbus.h"
Status: 'make dep' works, all the right include files are found. 'make all'
does not yet work.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@496 7894878c-1315-0410-8ee3-d5d059ff63e0
Whatever you cat to /proc/..../lm78-*/*, the result will now always be
sensible. No more overflows resulting in weird values.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@381 7894878c-1315-0410-8ee3-d5d059ff63e0
is used but ignored (because the driver could not determine what
specific chip was there).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@342 7894878c-1315-0410-8ee3-d5d059ff63e0
Also fixed a small lm78 problem and synchronised the detect script with
the Winbond detection.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@341 7894878c-1315-0410-8ee3-d5d059ff63e0
Also fixed a few nasty sensors.c bugs, and a minor LM78 one. If the new
parameters give trouble, please recompile sensors.c with DEBUG=1 and
examine the dmesg output!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@338 7894878c-1315-0410-8ee3-d5d059ff63e0
Improved bounds checking for FAN_TO_REG in all files.
For lm78-compatible drivers, minimum speed is 2657 RPM when the
divisor is 2. Attempts to set lower than that now are set to 0.
Before was set to a random number.
Thanks Jeff Dairiki.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@330 7894878c-1315-0410-8ee3-d5d059ff63e0
Supported insmod parameters:
ignore, ignore_range
probe, probe_range
force, force_lm78, force_lm78j, force_lm79
force* overrules ignore* overrules probe*
The *_range parameters need three elements for each specification:
bus,start_addr,end_addr
The address ranges are inclusive.
The other parameters need two elements for each specification:
bus,addr
In each case, '-1' stands for 'any I2C bus', and 9191 stands for
'the ISA bus' (Bonus question: who can figure out why I choose 9191?)
In each case, just append if you want several specification, for example:
insmod lm78 probe=9191,0x2a0,1,0x56
force_* does no detection, not even chip detection; it blindly assumes
you know what you are doing. plain force does the chip detection, but
nothing else; but it can still fail if the register read-out does not
match a chip type.
Detection is done in exactly the same way as sensors-detect, except that
only the range 0x20-0x2f is examined by default. This needs to be
synchronized somehow with the detect script. I would rather scan the whole
I2C address range, but with those clueless PIIX4 hangs when clock chips
are read, that would simply give too much trouble.
The detect script has slightly better ISA detection now, too.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@325 7894878c-1315-0410-8ee3-d5d059ff63e0
* fan_div should now be handled correctly (please, could anybody play with
this? My fan is on FAN3, the one whose fan_div can't be changed...)
* IN_{TO,FROM}_REG no longer needs the additional in parameter, since we
eliminated scaling in the module.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@114 7894878c-1315-0410-8ee3-d5d059ff63e0
* sensors.conf.eg now contains LM80 declarations
* i2c/i2c-core.c again displays which adapters and clients are found and
connected, but it does not track the calls to transfer functions in dmesg
* Slight alarms computation bug in lm78.c repaired
* First hacks at lm80.c; expect a fully working version later today
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@113 7894878c-1315-0410-8ee3-d5d059ff63e0
IF the Winbond docs are right this time, a Winbond should now be
recognized; a warning is printed, and it is treated as a LM79.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@70 7894878c-1315-0410-8ee3-d5d059ff63e0
To be done: support for GL518SM revision 0x80 and GL520SM
Kyösti, if you have some time soon, could you please test it?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@56 7894878c-1315-0410-8ee3-d5d059ff63e0
See doc/sysctl for an explanation why it is needed.
Also fixed two very small cleanup bugs in lm75/lm78, which would probably be
impossible to trigger anyway, but still.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@51 7894878c-1315-0410-8ee3-d5d059ff63e0
* LM75 temperature limits initializations were switched
* LM78 VID readings were off by a factor 100
* New bit-mask constants in sensors.h for LM78 alarm field
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@49 7894878c-1315-0410-8ee3-d5d059ff63e0
Mark D. Studebaker