This program scan the C-sources of the library and all kernel modules and
outputs everything it can find about all features.
To do: sort features and add command-line parameters, implement slightly
better layout.
The perl program completely replaces the C program and already has
much more functionality.
This program will be very helpful to write the kernel module documentation,
and especially to keep it up-to-date: as the C sources are examined,
updates need only be done at one place, in the source code.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@384 7894878c-1315-0410-8ee3-d5d059ff63e0
Like the LM78 before, all chips now handle strange values written to /proc/...
with grace - that is, they convert them to the most sane value considering
the circumstances, instead of reacting with strange resulting values
(note that they were already crash-free).
I also removed a factor '2' in the computation of the fan speeds in the
gl518sm module. This is conforming with the sheet; if your fan gives two
'ticks' for each rotation, just modify sensors.conf.
I tried to introduce rounding and limit checking to the maxilife module.
The VID computation is not yet rounded - I need the real formula for that.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@382 7894878c-1315-0410-8ee3-d5d059ff63e0
Whatever you cat to /proc/..../lm78-*/*, the result will now always be
sensible. No more overflows resulting in weird values.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@381 7894878c-1315-0410-8ee3-d5d059ff63e0
* sis5595.c now understand insmod parameters
* sis5595.c now uses sis5595_ prefix instead of lm78_ prefix
* sis5595.c now supports the correct subset of the LM78 features
(it only knows about 4 voltages, 2 fans and no vid)
* added SIS5595 defines to sensors.h
* fixed a small problem in compat.h
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@379 7894878c-1315-0410-8ee3-d5d059ff63e0
die_code is only relevant for true ADM1021 chips; for the MAX1617, this
is simply undefined, and for the MAX1617A, it is the chip device ID
register. So the die_code file is only created for ADM1021 chips.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@376 7894878c-1315-0410-8ee3-d5d059ff63e0
This one was easy. A MAX1617 is just a MAX1617A with better detection.
Life is beautiful!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@375 7894878c-1315-0410-8ee3-d5d059ff63e0
Detection is completely impossible, but sensors-detect now assumes with a
confidence of 1 (the lowest possible) that any chip in the LTC1710 address
range is a real LTC1710. Perhaps I should remove this again, as I don't
think this chip will be encountered 'in the wild' if your name is not Phil -
in which case you would have soldered it to your SMBus yourself, so you
should know what you are doing...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@372 7894878c-1315-0410-8ee3-d5d059ff63e0
gl518sm module
Besides the usual parameters, eeprom.o understands insmod parameter 'checksum'.
Set it to one (ie. 'modprobe eeprom checksum=1') to make it ignore any
chips which do not come through the checksum.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@371 7894878c-1315-0410-8ee3-d5d059ff63e0
As always, I also synchronised the detection with sensors-detect. Its
detection is now much better; it used to scan at many addresses on which
these chips could never exist
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@367 7894878c-1315-0410-8ee3-d5d059ff63e0
These will help those unfortunate people who use Debian or other braindead
distributions which ship with non-matching kernel headers in directories
/usr/include/{linux,asm}. For 'normal' people, nothing needs to be changed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@362 7894878c-1315-0410-8ee3-d5d059ff63e0
This new version also creates MODULE_PARM_DESC entries, which describe
what each parameter is used for.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@360 7894878c-1315-0410-8ee3-d5d059ff63e0
There are now two new insmod parameters, and the #define has disappeared
force: if set to anything but zero, this enables the PIIX4 as the old
#define did.
force_addr: This first sets a new I/O port address for the PIIX4, and
afterwards enables it. Supercedes 'force'.
Note that using force_addr is very, very dangerous if you do not know
what you are doing. On the other hand, it was very easy to add, and can
be a big help if your BIOS doesn't set correct addresses.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@353 7894878c-1315-0410-8ee3-d5d059ff63e0
* Removed unnecessary MOD_INC/DEC_USE_COUNT in host adapter drivers
(i2c-via bit-lp bit-velle)
You can now rmmod adapters even when they have registered clients.
Without this, you would have to detach the clients first. Only way of doing
this is to rmmod the client drivers, but the same drivers might be used to
access clients behind other hosts.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@347 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fixed i2c_probe to actually try some addresses, and
change the client->addr _only_ when we get a match.
* Algo-bit now scans the bus before registering it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@346 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard