* Fix self file name reference.
* i801_setup can be marked __devinit.
* Drop useless error local variable and label in i801_setup.
* Use symbolic names for SMBHSTCFG bits.
* Transmit the error code returned by i801_setup instead of forcing it
to an arbitrary value.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4061 7894878c-1315-0410-8ee3-d5d059ff63e0
Remove the PCI function number check when probing devices.
This check is redundant, each function has a separate PCI device
ID, so checking for that ID is sufficient.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4060 7894878c-1315-0410-8ee3-d5d059ff63e0
Two of the three poll loops have the poll and sleep swapped,
causing an extra sleep to occur after the polled condition is
fulfilled. In practice, this doubles the amount of sleep time for
every block transaction.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4059 7894878c-1315-0410-8ee3-d5d059ff63e0
430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes
were required because the base I/O address registers have changed in
these versions. Standard BARs are now being used, while the original
nForce2 chips used non-standard ones. (2.6 backport)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4054 7894878c-1315-0410-8ee3-d5d059ff63e0
refuse to load. Hopefully this will make it clearer for users, which
were often wondering why their destop or server systems were detected
as laptops.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4053 7894878c-1315-0410-8ee3-d5d059ff63e0
This fixes compilation with old kernels (2.4.20 and earlier). Thanks
to Yuan Mu for reporting.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4039 7894878c-1315-0410-8ee3-d5d059ff63e0
explicitly before each transaction. Backport from Linux 2.6, original
patch from Mark M. Hoffman.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3221 7894878c-1315-0410-8ee3-d5d059ff63e0
The new SMBus PEC implementation doesn't support PEC emulation on
non-PEC non-I2C SMBus masters, so we can drop all related code.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3177 7894878c-1315-0410-8ee3-d5d059ff63e0
Discard I2C_FUNC_SMBUS_*_PEC defines. i2c clients are not supposed to
check for PEC support of i2c bus drivers on individual SMBus
transactions, and i2c bus drivers are not supposed to advertise them.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3176 7894878c-1315-0410-8ee3-d5d059ff63e0
Clean up name string usage in 11 i2c bus drivers:
* Use the pci_driver name for requesting the I/O region rather than
redefining a new string.
* Do not initialize the i2c_adapter name to "unset".
This should save a few data bytes here and there.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3149 7894878c-1315-0410-8ee3-d5d059ff63e0
On 5/1/05, Sergey Vlasov <vsu@altlinux.ru> wrote:
>> Hello!
>>
>> http://openipmi.sourceforge.net/ provides patches for 2.4.x kernels
>> with updated IPMI code. However, these patches change the IPMI driver
>> API by adding an additional argument to ipmi_request():
>>
>> int ipmi_request(ipmi_user_t user,
>> struct ipmi_addr *addr,
>> long msgid,
>> struct ipmi_msg *msg,
>> + void *user_msg_data,
>> int priority);
>>
>> (user_msg_data is later returned in the struct ipmi_recv_msg field).
>> This API change breaks compilation of some lm_sensors drivers
>> (i2c-ipmb, i2c-ipmi).
>>
>> The patch below adds compatibility with the new IPMI API to i2c-ipmb
>> and i2c-ipmi drivers. <linux/ipmi.h> does not provide a real
>> API-version #define, therefore IPMI_RESPONSE_RESPONSE_TYPE (also added
>> by the openipmi.sf.net patch) is (ab)used as a new API indicator.
>>
>> Compile tested only due to lack of hardware.
(Yani I.):
Hi Sergey,
Actually there was a patch to the 2.6 i2c-ipmi/bmcsensors for this
problem (after Bene Martin notified me of the problem and how to fix
it), but from what I understand Corey re-included the ipmi_request
method in the next version once he learned of a driver using it (it
was removed because there was thought to be no usage). He was eager to
learn when bmcsensors would make it into the kernel so that he could
stop being nagged by the 'unused function police' as he put it .
It might be wise to apply a patch like this in 2.4 to support the
openipmi that went 'wrong', I changed the 2.6 driver to use the
ipmi_request_settime function to no ill effect, but you should
consider that Corey notes that it is preferred to use the old one:
(extract from some e-mail between Corey, Martin and I about the problem):
>>>>>>Interestingly enough the ipmi_request_settime still has a comment in
>>>>>>the header "Don't use this unless you *really* have to.", making me
>>>>>>wonder if there is a reason not to be using it instead of ipmi_request
>>>>>>if its re-incorporated into the kernel.
>>>>>>
>>>>>>
>>
>>>>
>>>>I guess the only one qualified to answer that one would be corey.
>>>>
>>>>Bye, Martin
>>>>
>>>>
>
>>You wouldn't generally use it because it sets the timeouts and for most
>>purposes the timeouts are defined by the spec (sort of).
>>
>>Do you have any feeling when the BMC sensors package will go into the
>>mainstream kernel? That would be the time to coordinate adding the
>>normal function back in so I'm not constantly fighting the unused
>>function police.
>>
>>-Corey
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2987 7894878c-1315-0410-8ee3-d5d059ff63e0
This is done by not taking care of additional status bits. This is a
backport from Linux 2.6.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2953 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare