* Greg KH <greg@kroah.com> [2003-06-02 10:20:40 -0700]:
> On Sun, Jun 01, 2003 at 10:38:08AM -0400, Mark M. Hoffman wrote:
> > > This patch against 2.5.70 works for me vs. an SMBus adapter. It needs
> > re-testing against an ISA adapter since my particular chip is SMBus only.
>
> I've applied this and will send it off to Linus in a bit.
Thanks!
This patch fixes the various return values in the w83781d_detect()
error paths. It also cleans up some formatting here and there.
It should be applied on top of the previous one.
It works for me; same caveat as above w.r.t. ISA.
Regards,
--
Mark M. Hoffman
mhoffman@lightlink.com
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1990 7894878c-1315-0410-8ee3-d5d059ff63e0
Copy sysctl enums to chip drivers from sensors.h for now,
as seen in drivers included in 2.5 tree. File no longer included
from kernel side.
Apply i2c-proc change in CVS tagged -km2.
Partial clean and sort of includes everywhere.
Add i2c-dev.h, as a partial copy from i2c.
Add to sensors.h from i2c-proc.h to compile things.
Remove i2c-isa.h.
Reflect header file changes to lib/ and prog/.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1705 7894878c-1315-0410-8ee3-d5d059ff63e0
Module refcounting using .owner, removing of inc/dec_use.
These require (yet unreleased) i2c 2.8.0+.
Named initializers everywhere. Unified namespace.
Cleanup for 2.5, remove EXPORT_NO_SYMBOLS, declare everything
static. Apply initcalls.
PCI device registration changes for busses started, replicating
from i2c-amd*. While everything does compile, nothing really
works. Well, maybe i2c-amd* ported back from 2.5 tree.
After updating your work directory, run
> cvs diff -u -r LAST-PRE-2-8-I2C > lm-2.8-patches-1
BEWARE: I have not even insmoded any of these yet.
To compile, you need i2c from cvs too.
For 2.4 kernel :
> cvs co -r lk2-4 i2c
For 2.5 kernel :
> cvs co i2c
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1698 7894878c-1315-0410-8ee3-d5d059ff63e0
indication will always be valid; it won't be cleared forever by
reading the register. Do this by setting temp1_hyst to 127
and programming register 4C which sets it for temps 2 and 3.
Don't print hyst. value for temp1 in 'sensors' if == 127.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1407 7894878c-1315-0410-8ee3-d5d059ff63e0
to different addresses; this allows initialization of two
clients on the same i2c bus by preventing subclient address
conflicts at 0x48 and 0x49.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1312 7894878c-1315-0410-8ee3-d5d059ff63e0
Use 'init=0' to skip initialization, this should fix
those pesky PC's that crash when you load w83781d.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1209 7894878c-1315-0410-8ee3-d5d059ff63e0
This was broken by 2.6.0 because
2.6.0 didn't reset the fan clock setting at startup.
Therefore the AS_FAN_* macros were no longer needed to specially
correct the fan speed. So remove the special handling and the
AS_FAN_* macros and things should work now.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1135 7894878c-1315-0410-8ee3-d5d059ff63e0
_sysctl_real
_register_entry
_proc_real
_detect
_deregister_entry
_chips_data
which were the global symbols renamed in i2c-proc.[ch] in the
i2c package.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1101 7894878c-1315-0410-8ee3-d5d059ff63e0
that are configurable as we will count on the BIOS to configure
the chip correctly. This will likely change fan and temperature
readings for some users.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1039 7894878c-1315-0410-8ee3-d5d059ff63e0
Leave the files there for now.
Remove old installed sensors.o in kernel/Module.mk.
sensors.c was moved to i2c-proc.c in the i2c package.
i2c-isa.h was appended to i2c.h in the i2c package.
Delete all but the SYSCTL and ALARMS definitions in sensors.h,
as the rest of the file was moved to i2c-proc.h in the i2c package.
Remove #include "i2c-isa.h" lines in all chip drivers and
in bus driver i2c-isa.c.
This all probably breaks mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1015 7894878c-1315-0410-8ee3-d5d059ff63e0
the horrible
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
(LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
They should now both work with 2.3 kernels (including 2.4 prepatches)
and very new 2.2 kernels (ie. 2.2.18 prepatches)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@933 7894878c-1315-0410-8ee3-d5d059ff63e0
does not support the extended fan_div bits like the w83782d
does. This should fix fan2 so it defaults to a divisor
of 2 instead of 32.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@871 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare