This one was not nice at all. When /proc/bus/i2c-* is read, information is
put into a kernel buffer, which was declared to be the same size as the
final user-space buffer into which it should be copied. Information was
copied into the kernel buffer line by line (using sprintf). If the
buffer is smaller than the whole /proc/bus/i2c-*, only part of the file
was copied. But if the buffer did not break on a line-break, the sprintf
wrote beyond the kernel buffer. With devastating results. Solution: make
the kernel buffer a little longer, so that a single additional line would
fit into it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@431 7894878c-1315-0410-8ee3-d5d059ff63e0
aweful happens to me (I get hit by a bus, lose my mind, get hired
by Microsoft, etc.), then somebody else can easily take over.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@428 7894878c-1315-0410-8ee3-d5d059ff63e0
* The library can now read GL518SM revision 0x00 voltages (in the worst case,
it will read zeros if the module was not inserted with readall=1)
* The readall parameter is now documented through MODULE_PARM_DESC
* Note my remarks in the TODO file
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@403 7894878c-1315-0410-8ee3-d5d059ff63e0
* Readings for the ADM9240 are now updated every 0.5 seconds; for the
DS1780, every 2.0 seconds.
* I still think it likely that voltage readings will be far-off in the
current implementation
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@401 7894878c-1315-0410-8ee3-d5d059ff63e0
Now prints out what kind of sensor it is.
Also separated alarms for temp2 and temp3 for 782d/783s (they are
a single bit for 781d).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@400 7894878c-1315-0410-8ee3-d5d059ff63e0
it proves to be noxious. Added writes for rt table. Use at own risk.
Fixed 782d fan3 bug hopefully.
Added 16,32,64,128 fan_div values for 782d/783s.
Reformatted some > 80 col. lines.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@397 7894878c-1315-0410-8ee3-d5d059ff63e0
The old documentation of Phil is still present at the bottom of the file.
Phil may decide to remove it.
In the driver, file 'status' is renamed to 'alarms' and masked to display
only the alarm bits. This fits more closely with other drivers, and the
remaining bit was not interesting anyway.
I fixed a problem that made insertion of the module impossible (I made a
typo when I introduced the insmod parameters) *** Someone else seems to
have changed this at almost the same moment?!? Now it is correct. ***
The MAX1617 and MAX1617A are now also supported by the library.
Once more, some slight formatting changes are made in the documentation
generators (some columns were made wider).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@395 7894878c-1315-0410-8ee3-d5d059ff63e0
Also a very slight formatting improvement for the module parameters
documentation script, and a typo from the LM78 documentation removed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@393 7894878c-1315-0410-8ee3-d5d059ff63e0
This program scan the C-sources of the library and all kernel modules and
outputs everything it can find about all features.
To do: sort features and add command-line parameters, implement slightly
better layout.
The perl program completely replaces the C program and already has
much more functionality.
This program will be very helpful to write the kernel module documentation,
and especially to keep it up-to-date: as the C sources are examined,
updates need only be done at one place, in the source code.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@384 7894878c-1315-0410-8ee3-d5d059ff63e0
Like the LM78 before, all chips now handle strange values written to /proc/...
with grace - that is, they convert them to the most sane value considering
the circumstances, instead of reacting with strange resulting values
(note that they were already crash-free).
I also removed a factor '2' in the computation of the fan speeds in the
gl518sm module. This is conforming with the sheet; if your fan gives two
'ticks' for each rotation, just modify sensors.conf.
I tried to introduce rounding and limit checking to the maxilife module.
The VID computation is not yet rounded - I need the real formula for that.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@382 7894878c-1315-0410-8ee3-d5d059ff63e0
Whatever you cat to /proc/..../lm78-*/*, the result will now always be
sensible. No more overflows resulting in weird values.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@381 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard