as the BIOS is supposed to set them up properly. This information makes it
easier to find out which temperature channel corresponds to the CPU.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4456 7894878c-1315-0410-8ee3-d5d059ff63e0
based on preliminary work by Yuan My (Winbond). Thanks to Bernardo Motta
at Observit for providing the hardware that made it possible.
Note that support for the W83627DHG isn't included, but it could easily be
added later is anyone needs it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4447 7894878c-1315-0410-8ee3-d5d059ff63e0
The lowest 3 bits are ignored, and the chip decodes all 8 addresses,
not only the 2 it needs. This is a backport from Linux 2.6.20.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4263 7894878c-1315-0410-8ee3-d5d059ff63e0
input order to match the Linux 2.6 driver.
libsensors: Change vt1211 temp3-7 magnitude from 1 to 3.
sensors.conf.eg: Adjust the vt1211 section to match the new driver
interface.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4168 7894878c-1315-0410-8ee3-d5d059ff63e0
Also update to display the (beep) properly due to the fact that the
w83791d beep enable mask is different than the alarm mask.
Patch from Sven Anders and Charles Spirakis.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4096 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch enables the reading of temp1 (Reading3) from the VT1211.
Reading3 returns the V1211's internal temperature.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3246 7894878c-1315-0410-8ee3-d5d059ff63e0
functions being called before their actual definition. Thanks to Greg
Kroah-Hartman for the report.
Also, drop an unused lock.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3225 7894878c-1315-0410-8ee3-d5d059ff63e0
on globals. The resulting code is slightly more compact too (both source
and compiled binary).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3213 7894878c-1315-0410-8ee3-d5d059ff63e0
from Linux 2.6:
* Fan inputs 4, 5, 6 and 7 can be disabled.
* Simplify voltage reading code.
* Simplify and inline w83792d_{read,write}_value.
* Drop unused lock.
* Make needlessly global functions static.
* Fix the bug where tolerance 2 and tolerance 3 can not be set.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3209 7894878c-1315-0410-8ee3-d5d059ff63e0
"(...) I found what I think is a bug in the it87_fan_div setting code.
(...) What was happening was that the check to make sure the third fan's
divisor was either 2 or 8 was using the wrong member of the it87 data
structure. This was causing the if to never fail and thus always force
the divisor to 2."
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3200 7894878c-1315-0410-8ee3-d5d059ff63e0
in line with the new 2.6 driver. The most important changes are temp
inputs renumbering, and conversion formulas changes, because part of the
conversions are now done by the driver as required by the interface
standard.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3194 7894878c-1315-0410-8ee3-d5d059ff63e0
VRM for all drivers. Same was done it Linux 2.6 some times ago.
Also comment out all "set vrm" lines in sensors.conf.eg, as Linux 2.6
now accurately deduces the VRM from the CPU model.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3190 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare