Leave the files there for now.
Remove old installed sensors.o in kernel/Module.mk.
sensors.c was moved to i2c-proc.c in the i2c package.
i2c-isa.h was appended to i2c.h in the i2c package.
Delete all but the SYSCTL and ALARMS definitions in sensors.h,
as the rest of the file was moved to i2c-proc.h in the i2c package.
Remove #include "i2c-isa.h" lines in all chip drivers and
in bus driver i2c-isa.c.
This all probably breaks mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1015 7894878c-1315-0410-8ee3-d5d059ff63e0
address and program the base address in the 686a.
This is NOT a PCI force; the 3057 device must
be present in lspci.
Should work for Asus A7V/K7V boards which don't set the
base address (because they also have a as99127f on them!??).
Some rough edges remain, because
via686a_find() does not know there is a force; that only
is apparent to via686a_detect().
Notably, the driver will stay loaded even if the address is
uninitialized and there is no force; also, the driver complains
that a force is needed even when you give it one.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@999 7894878c-1315-0410-8ee3-d5d059ff63e0
to mkpatch in 2.5.5. Also add mtp008 and ds1621 init calls in anticipation
of them being added. Fix typos adm9024->adm9240.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@997 7894878c-1315-0410-8ee3-d5d059ff63e0
I added the list we made some weeks ago, except for the maxilife driver
which is old and which I do not trust at all.
To do: add descriptions for Documentation/Configure (any volunteers?
It should be put in mkpatch.pl next to the other documentation)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@961 7894878c-1315-0410-8ee3-d5d059ff63e0
programmers' reference guide. This ensures that the input value
is latched in the 815 register. We assume this also applies
to the 810 or at least does no harm. Ticket 419.
Alan Chen <alp_chen@hotmail.com> reports that this fixes the
bug where i2c-algo-bit bit_test=1 fails the test.
We don't have any data that shows there was any problem in
normal operation (non bit_test) or that this fixes anything else.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@941 7894878c-1315-0410-8ee3-d5d059ff63e0
(also in prog/sensors/chips.c),
rename /proc entries to in[0-5] and temp[1-2], fix negative
temperature reporting.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@940 7894878c-1315-0410-8ee3-d5d059ff63e0
the horrible
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
(LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
They should now both work with 2.3 kernels (including 2.4 prepatches)
and very new 2.2 kernels (ie. 2.2.18 prepatches)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@933 7894878c-1315-0410-8ee3-d5d059ff63e0
does not support the extended fan_div bits like the w83782d
does. This should fix fan2 so it defaults to a divisor
of 2 instead of 32.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@871 7894878c-1315-0410-8ee3-d5d059ff63e0
Somehow, this commit seems to have failed before. Nothing major: added
an entry in the manpage, fixed a spelling error in main.c and added
a CHANGES entry.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@848 7894878c-1315-0410-8ee3-d5d059ff63e0
Mark D. Studebaker