wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-18 11:09:32 +00:00
Code Issues Packages Projects Releases Wiki Activity
948 Commits 4 Branches 78 Tags
d212e1f4e76860a61bb12c47bc4bb007bef2bbf0
Commit Graph
948 Commits
This Branch
This Branch
All Branches
Author SHA1 Message Date
Mark D. Studebaker d212e1f4e7 first cut at documenting naming and content standards for 
entries in /proc. Corrections/additions welcome.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@971 7894878c-1315-0410-8ee3-d5d059ff63e0
 2001-01-06 03:53:07 +00:00
Mark D. Studebaker fd50c908ce update serverworks board info 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@970 7894878c-1315-0410-8ee3-d5d059ff63e0
 2001-01-06 02:34:37 +00:00
Mark D. Studebaker d3df8ec7dc initial brief doc for mtp008 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@969 7894878c-1315-0410-8ee3-d5d059ff63e0
 2001-01-06 02:28:39 +00:00
Mark D. Studebaker ccc797cce1 update docs to reflect change from temp and remote_temp 
to temp1 and temp2.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@968 7894878c-1315-0410-8ee3-d5d059ff63e0
 2001-01-06 02:28:13 +00:00
Mark D. Studebaker 37401d0d9f serverworks now uses piix4 driver. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@967 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-27 20:08:52 +00:00
Mark D. Studebaker ece9f6ce1c note that i2c-piix4 supports Serverworks. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@966 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-27 19:58:28 +00:00
Mark D. Studebaker 7c21d246e8 removed; now supported by i2c-piix4. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@965 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-23 17:01:55 +00:00
Mark D. Studebaker 3047bd8374 remove i2c-osb4 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@964 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-23 17:00:37 +00:00
Philip Edelbrock f592b02b21 (Phil) Wrapped Serverworks OSB4 support into i2c-piix4.c (briefly tested 
on both platforms).  LM87 support is very far along, and should work
for a majority of users, but some minor tweaks are still on the to-do list.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@963 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-22 19:26:21 +00:00
Frodo Looijaard 09091b0a6f Matteo Catanese's fixes to my mkpatch update 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@962 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-20 14:16:14 +00:00
Frodo Looijaard fa1081df9a Finally added almost all drivers to mkpatch! 
I added the list we made some weeks ago, except for the maxilife driver
which is old and which I do not trust at all.

To do: add descriptions for Documentation/Configure (any volunteers?
It should be put in mkpatch.pl next to the other documentation)


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@961 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-19 21:26:00 +00:00
Mark D. Studebaker e3fe21cc9f rename /proc entries temp and remote_temp to temp1 and temp2. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@960 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 20:41:47 +00:00
Mark D. Studebaker 3edc2150a2 use print_temp_info() for ds1621. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@959 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 19:45:18 +00:00
Mark D. Studebaker f0df41dd97 chg addr range to 2c-2e; fix fan min writes. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@958 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 19:28:09 +00:00
Mark D. Studebaker 4f01f7eb79 (mds) stub out two-fan support. Driver currently sets chip for single 
fan input (fan2), with fan1 input set for analog in, so fan1 entry
      in /proc won't work.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@957 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 17:58:58 +00:00
Mark D. Studebaker 7871346710 (mds) add verification of company ID reg 0x3e in detection. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@956 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 17:38:04 +00:00
Mark D. Studebaker ecb7bb70a3 (mds) rename /proc entries to in[0-5] 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@955 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 17:27:10 +00:00
Mark D. Studebaker 2698188e2f (mds) change to standard VID calculation 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@954 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 17:22:08 +00:00
Mark D. Studebaker ab321d5243 (mds) add lm87 support to 'sensors'. Rename SYSCTL_* values to standard 
TEMP[1-3], etc. No fan2 support in driver yet.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@953 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 17:07:24 +00:00
Mark D. Studebaker 6b26ed4118 (mds) patch from Steffen Persvold <sp@scali.no>. Change function names, 
etc. from LM87... to lm87...; rename /proc entries to standard
      in[0-5], etc.; also column 80 cleanup.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@952 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 15:42:02 +00:00
Mark D. Studebaker baf3d7fbdd (mds) change lm87 prefix to lower case 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@951 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-16 15:21:29 +00:00
Philip Edelbrock 5938b18941 (Phil) Added a redundant define for Serverworks PCI vendor ID, for those 
kernels which need it.  Also tweaked sensors-detect to work seemlessly
with the new driver.  Driver is tested, and works as expected! (Yeah!)


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@950 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-15 17:30:20 +00:00
Mark D. Studebaker a8cf5cbfa2 (mds) add i2c- prefix to module name in version/date printk for those 
that were missing it.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@949 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-15 00:50:18 +00:00
Mark D. Studebaker f5ff85cca2 (mds) add serverworks osb4 support. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@948 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-15 00:43:16 +00:00
Mark D. Studebaker ee0fd78049 (mds) fix writes to fan_div first value. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@947 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-15 00:17:27 +00:00
Philip Edelbrock 6b593aa26a (Phil) Initial Serverworks southbridge support, thanks to Steffen Persvold 
at Scali.  Untested, but compiles cleanly.  Seems to be very closely based
on the Intel PIIX4 SMBus driver.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@946 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-14 23:02:00 +00:00
Mark D. Studebaker 33d1607299 (mds) print message if no sensors are found rather than just silently returning. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@945 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-14 01:20:52 +00:00
Mark D. Studebaker d4cf6b4a6f (mds) start a simple log of the donations we have received. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@944 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-14 00:38:56 +00:00
Mark D. Studebaker 7ccaa7f419 (mds) Check for uninitialized base addresses. Check for unenabled sensors. 
On sis5595, refuse to load if chip not found.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@943 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-14 00:26:13 +00:00
Mark D. Studebaker 7879f5cf8a (mds) fix fan min 3 initialization 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@942 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-04 00:05:14 +00:00
Mark D. Studebaker ec53bfa1fe (mds) Add "dummy writes" before bit reads as recommended in 815 
programmers' reference guide. This ensures that the input value
      is latched in the 815 register. We assume this also applies
      to the 810 or at least does no harm. Ticket 419.
      Alan Chen <alp_chen@hotmail.com> reports that this fixes the
      bug where i2c-algo-bit bit_test=1 fails the test.
      We don't have any data that shows there was any problem in
      normal operation (non bit_test) or that this fixes anything else.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@941 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-12-02 22:39:21 +00:00
Mark D. Studebaker b57428a14b (mds) add remote temp support (temp2) to adm1025 
(also in prog/sensors/chips.c),
      rename /proc entries to in[0-5] and temp[1-2], fix negative
      temperature reporting.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@940 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-30 02:44:47 +00:00
Mark D. Studebaker a1952c601f (mds) modify the print_temp_info() routine that was added in the 
Fahrenheit patch so that it will print either limit/hysteresis
      or min/max. Add a flag to each call to select the right one.
      Change temp output to be %3.1f. Some chips are 1 degree accuracy,
      some are .5, the 686a is less. For now since it is a common
      routine use one decimal point. In future maybe add another
      parameter to the routine to specify accuracy.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@939 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-30 02:42:53 +00:00
Mark D. Studebaker 6dadf068b2 (mds) add adm1025 entries 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@938 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-30 02:39:06 +00:00
Mark D. Studebaker 16f5cb512a (mds) add entry for Serverworks south bridge. 0x1166 / 0x0200. 
Not completely sure this is the correct PCI ID though.
      No driver yet (requires NDA).


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@937 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-29 03:25:24 +00:00
Mark D. Studebaker a009a9acee (mds) Claim support for TelCom Semiconductor TCN75, an LM75 second source. 
TelCom was recently purchased by Microchip.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@936 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-29 01:27:31 +00:00
Mark D. Studebaker bb4b723e68 (mds) add ds1621 driver from Christian Zuckschwerdt (zany@triq.net) 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@935 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-26 23:07:17 +00:00
Frodo Looijaard bd1b923045 Typo corrected as indicated by Christian W. Zuckschwerdt 
<zany@triq.net>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@934 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-23 17:01:32 +00:00
Frodo Looijaard aa0c8f6768 Updated the MUTEX definitions again - they are now guarded by 
the horrible
         #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
             (LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
        They should now both work with 2.3 kernels (including 2.4 prepatches)
        and very new 2.2 kernels (ie. 2.2.18 prepatches)


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@933 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-22 23:54:39 +00:00
Mark D. Studebaker 21ce90d2d8 (mds) update for sensors fahrenheit and module mutex changes 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@932 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-22 17:59:37 +00:00
Mark D. Studebaker 7336a798c9 (mds) add more suggestions to contributors of things to do 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@931 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-22 17:55:46 +00:00
Mark D. Studebaker eb74a8ad40 (mds) advise that people get and install the latest i2c package even 
if they have kernel 2.3.34 or greater. Ticket 427.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@930 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-19 22:31:43 +00:00
Frodo Looijaard 4444c1464a Applied patch of Chip Salzenberg <chip@valinux.com>: 
Better #ifdefs


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@929 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-18 11:38:15 +00:00
Frodo Looijaard 4fe4b3619c Display stuff as Fahrenheits; patch of Kelsey Hudson 
<khudson@rohan.sdsu.edu >


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@928 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-13 18:31:48 +00:00
Frodo Looijaard 62ebc84b6f Patch to make it compile with 2.2 kernels (people, please test this 
before submitting patches!)


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@927 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-10 20:45:30 +00:00
Philip Edelbrock 08c77525b6 (Phil) Nothing changed. Just testing again. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@926 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-04 00:15:53 +00:00
Philip Edelbrock 5a001e423d (Phil) Just testing the new server. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@925 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-04 00:12:11 +00:00
Mark D. Studebaker ebee4ccfcc (mds) add recent changes from several people 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@924 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-02 02:59:59 +00:00
Mark D. Studebaker 03e12c8b80 (mds) allow force and force_ddcmon parameters to bypass detection 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@923 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-02 02:56:37 +00:00
Dan Eaton ab8a428bb6 (dan) Extended cache time for values to 5 seconds. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@922 7894878c-1315-0410-8ee3-d5d059ff63e0
 2000-11-01 16:53:42 +00:00