Read the intro; it describes how you can use CVS to diff between old releases.
Stupid copyright typo in piix4.c fixed
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@146 7894878c-1315-0410-8ee3-d5d059ff63e0
* (module) VIN limits are now set to sane values (3V instead of 30V, which
caused nasty overflows)
* (module) VIN limits had min/max swapped in gl518_attach_adapter
* (lib) TEMP_HYST used the VID sysctl instead of the TEMP sysctl, leading
to bogus readings
* (sensors) print n/a for gl518 not available readings.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@145 7894878c-1315-0410-8ee3-d5d059ff63e0
readings. (changed a u8 to a u16 in the data struct.) Now the temp
readings seem to work perfectly!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@136 7894878c-1315-0410-8ee3-d5d059ff63e0
This could lead to memory corruption and to the could-not-unload-module
problem of earlier reports. With a little luck, this will resolve all
module loading/unloading problems reported.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@132 7894878c-1315-0410-8ee3-d5d059ff63e0
* Force the Winbond into bank 0 before anything else is done
* Copied fan_div patch from lm78.c
* Copied IN_{FROM,TO}_REG patch from lm78.c
* Copied alarms computation bug fix from lm78.c
* Nicer way of managing banks: the bank number to access is now the high
byte of the (as u16 declared) register number. Only
w38781d_{read,write}_value needs now to be aware of banks. Also, the
w38781d_{read,write}_value functions now know that sensors 2 and temp, hyst
and over registers are word-sized.
* Introduced fan_div for FAN3 and 9-bit temperature readings.
* Made beep file work like the gl518sm one
* Corrected small VID problem (bit 4 was read from the wrong register)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@121 7894878c-1315-0410-8ee3-d5d059ff63e0
* fan_div should now be handled correctly (please, could anybody play with
this? My fan is on FAN3, the one whose fan_div can't be changed...)
* IN_{TO,FROM}_REG no longer needs the additional in parameter, since we
eliminated scaling in the module.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@114 7894878c-1315-0410-8ee3-d5d059ff63e0
* sensors.conf.eg now contains LM80 declarations
* i2c/i2c-core.c again displays which adapters and clients are found and
connected, but it does not track the calls to transfer functions in dmesg
* Slight alarms computation bug in lm78.c repaired
* First hacks at lm80.c; expect a fully working version later today
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@113 7894878c-1315-0410-8ee3-d5d059ff63e0
This file consists of two numbers: the first is either 0 (global sound
alarm disable) or 1 (enable), the second is in the same encoding as the
'alarm' file and determines for which alarms the speaker will sound.
The new file was added to the module, the library and the sensors application.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@112 7894878c-1315-0410-8ee3-d5d059ff63e0
* Added lib directory; the library will live here
* Added Makefile fragment in the lib dir
* Modified README.directories to include the new dir
* Added lib directory to the fragments the Makefile uses
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@90 7894878c-1315-0410-8ee3-d5d059ff63e0
Several, mostly internal, things changed. Most notably, the install
directories are extended (we'll need this to install the new library).
Also, explicit rules for creating .c and .o files are added.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@88 7894878c-1315-0410-8ee3-d5d059ff63e0
doesn't seem to have any sensors (I guess?), or the Windbond PDF is so
convoluted that I haven't understood it enough to get it working (another
good possibility). Oh, well. It builds and inserts, anyway.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@85 7894878c-1315-0410-8ee3-d5d059ff63e0
start for the LM80 driver. (Since 80-79=1, they must be very similar,
right? :') Oh, and I removed the ISA components from it since the LM80 is
an SMBus only chip, too.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@84 7894878c-1315-0410-8ee3-d5d059ff63e0
has no Winbond specific features implemented yet. Proper testing for
a Winbond also needs to be implemented. src/Module.mk and src/sensors.h
were modified slightly to support the new driver.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@83 7894878c-1315-0410-8ee3-d5d059ff63e0
* Turned the i2c noise level down, by setting the debug_level in algo-bit.c
and i2c-core.c to 0 instead of 1. This should stop it from polluting
the dmesg output, as it does at this moment.
* Renamed gl518-r?0-* entries to gl518sm-r?0-*
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@82 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fixed FORCE_PIIX4_ENABLE bus (misspelled function call)
* Added Kyösti's mail about the VIA chipset to the doc directory, as
temporary placeholder
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@78 7894878c-1315-0410-8ee3-d5d059ff63e0
* Only first 64 bytes are read (enough for SDRAM EEPROM data) in 16 byte
blocks (separate proc files).
* No writing to EEPROMs. It's actually quite easy to add support for
writing, but I was being very paranoid about killing my DIMMs. I may add
write support, but make it only available when a #define is specified.
Now for a user app to decode the values...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@71 7894878c-1315-0410-8ee3-d5d059ff63e0
IF the Winbond docs are right this time, a Winbond should now be
recognized; a warning is printed, and it is treated as a LM79.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@70 7894878c-1315-0410-8ee3-d5d059ff63e0
* Somehow, i2c-proc did not yet use the i2c_adapter_id call. This must have
slipped through.
* isa.o and smbus.o changes I made to make them less noisy had a small
error (no return value), which caused strange device detections.
* Added /proc/bus/i2c module-count monitoring - somehow, this slipped
through, too.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@68 7894878c-1315-0410-8ee3-d5d059ff63e0
access unimplementable functionality. And removed a #if which could never
become true anyway from i2c-proc.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@67 7894878c-1315-0410-8ee3-d5d059ff63e0
Strangly enough, both these devices use a high byte, low byte order for
word-sized reads and writes. The SMBus documentation specifies the
reverse (low, high) order, though. If all devices use the high,low order,
we should change this in smbus.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@64 7894878c-1315-0410-8ee3-d5d059ff63e0
* Alarms may now work (sound signal disabled, though)
* Revision 0x80 should be recognized and handled correctly
* If fan unconnected, it should show 0 instead of -1 now
Note that this driver will not support GL520SM chips; that chip is different
enough that it deserves its own driver.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@61 7894878c-1315-0410-8ee3-d5d059ff63e0
To be done: support for GL518SM revision 0x80 and GL520SM
Kyösti, if you have some time soon, could you please test it?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@56 7894878c-1315-0410-8ee3-d5d059ff63e0
insertion ('memset' not resolved). Namely, I changed this line (near the
very top of the function):
char msgbuf0[33] = { command };
to:
char msgbuf0[33];
[...]
msgbuf0[0] = command;
which should be equivelent (right?? ;').
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@54 7894878c-1315-0410-8ee3-d5d059ff63e0
See doc/sysctl for an explanation why it is needed.
Also fixed two very small cleanup bugs in lm75/lm78, which would probably be
impossible to trigger anyway, but still.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@51 7894878c-1315-0410-8ee3-d5d059ff63e0
Yet more documentation updates, and a quick Makefile update to install all
include files correctly.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@50 7894878c-1315-0410-8ee3-d5d059ff63e0
* LM75 temperature limits initializations were switched
* LM78 VID readings were off by a factor 100
* New bit-mask constants in sensors.h for LM78 alarm field
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@49 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard