update version

add TLS support

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1 @@
+blank_issues_enabled: false

.github/ISSUE_TEMPLATE/issue.md

@@ -1,3 +1,11 @@
+---
+name: Issue template
+about: Please fill this issue template for reporting Mongoose issues
+#title: 
+#labels: 
+#assignees: 
+---
+
 - My goal is: _describe_
 - My actions were: _describe_
 - My expectation was: _describe_

.github/workflows/cifuzz.yml

@@ -29,7 +29,7 @@ jobs:
         dry-run: false
         language: c++
     - name: Upload Crash
-      uses: actions/upload-artifact@v1
+      uses: actions/upload-artifact@v4
       if: env.GO == 1 && failure() && steps.build.outcome == 'success'
       with:
         name: artifacts

.github/workflows/codeql.yml

@@ -3,7 +3,7 @@ name: "CodeQL Scanning"
 
 on:
   schedule:
-    - cron: '30 2 * * *' # run at 2:30 AM UTC
+    - cron: '30 23 * * *' # run at 11:30 PM UTC
   # Allow manual runs
   workflow_dispatch:
 
@@ -17,11 +17,11 @@ jobs:
     permissions:
       security-events: write
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v4
       with: { fetch-depth: 2 }
 
     - name: Initialize CodeQL
-      uses: github/codeql-action/init@v2
+      uses: github/codeql-action/init@v3
       with:
         languages: cpp
     - run: |
@@ -29,4 +29,4 @@ jobs:
         ./test/setup_ga_network.sh && make -C test mip_test CC=gcc ASAN= ASAN_OPTIONS=
 
     - name: Perform CodeQL Analysis
-      uses: github/codeql-action/analyze@v2
+      uses: github/codeql-action/analyze@v3

.github/workflows/nightly.yml

@@ -1,7 +1,7 @@
 name: Full build and test
 on:
   schedule:
-    - cron: '0 1 * * *' # run at 1 AM UTC
+    - cron: '0 22 * * *' # run at 10 PM UTC
   # Allow manual runs
   workflow_dispatch:
 env:
@@ -13,7 +13,7 @@ jobs:
       fail-fast: false
       matrix:
         cc: [gcc, clang, g++, clang++]
-        target: [test, mip_test]
+        target: [test]
         ssl: ["", BUILTIN, MBEDTLS, OPENSSL, WOLFSSL]
         select: ["-DMG_ENABLE_POLL=0 -DMG_ENABLE_EPOLL=0", "-DMG_ENABLE_POLL=1 -DMG_ENABLE_EPOLL=0", "-DMG_ENABLE_POLL=0 -DMG_ENABLE_EPOLL=1"]
         exclude:
@@ -37,7 +37,23 @@ jobs:
     steps:
     - uses: actions/checkout@v4
       with: { fetch-depth: 2 }
-    - run: ./test/setup_ga_network.sh && sudo apt -y update ; sudo apt -y install libmbedtls-dev libwolfssl-dev && make -C test ${{ matrix.target }}
+    - run: sudo apt -y update ; sudo apt -y install libmbedtls-dev libwolfssl-dev && make -C test ${{ matrix.target }}
+  mip:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        cc: [gcc, clang, g++, clang++]
+        target: [mip_test, mip_tap_test]
+        ssl: ["", BUILTIN, MBEDTLS, OPENSSL, WOLFSSL]
+    name: ${{ matrix.target }} CC=${{ matrix.cc }} SSL=${{ matrix.ssl }}
+    env:
+      CC: ${{ matrix.cc }}
+      SSL: ${{ matrix.ssl }}
+    steps:
+    - uses: actions/checkout@v4
+      with: { fetch-depth: 2 }
+    - run: if [ "${{ matrix.target }}" == "mip_tap_test" ]; then ./test/setup_ga_network.sh ; fi && sudo apt -y update ; sudo apt -y install libmbedtls-dev libwolfssl-dev && make -C test ${{ matrix.target }} IPV6=0
   s390:
     runs-on: ubuntu-latest
     strategy:
@@ -48,7 +64,7 @@ jobs:
     steps:
     - uses: actions/checkout@v4
       with: { fetch-depth: 2 }
-    - run: sudo apt -y update ; sudo apt -y install qemu binfmt-support qemu-user-static && docker run --rm --privileged multiarch/qemu-user-static --reset -p yes && make -C test s390 SSL=${{ matrix.ssl }}
+    - run: sudo apt -y update ; sudo apt -y install binfmt-support qemu-user-static && docker run --rm --privileged multiarch/qemu-user-static --reset -p yes && make -C test s390 SSL=${{ matrix.ssl }}
   armhf:
     runs-on: ubuntu-latest
     strategy:
@@ -59,7 +75,7 @@ jobs:
     steps:
     - uses: actions/checkout@v4
       with: { fetch-depth: 2 }
-    - run: sudo apt -y update ; sudo apt -y install qemu binfmt-support qemu-user-static && docker run --rm --privileged multiarch/qemu-user-static --reset -p yes && make -C test armhf SSL=${{ matrix.ssl }}
+    - run: sudo apt -y update ; sudo apt -y install binfmt-support qemu-user-static && docker run --rm --privileged multiarch/qemu-user-static --reset -p yes && make -C test armhf SSL=${{ matrix.ssl }}
   unamalgamated-mg_prefix:
     runs-on: ubuntu-latest
     strategy:
@@ -101,7 +117,7 @@ jobs:
     name: macos SSL=${{ matrix.ssl }} TFLAGS=${{ matrix.select }}
     env:
       SSL: ${{ matrix.ssl }}
-      TFLAGS: ${{ matrix.select }} -DNO_SNTP_CHECK -Wno-sign-conversion # Workaround for MbedTLS 3.5.0
+      TFLAGS: ${{ matrix.select }} -Wno-sign-conversion # Workaround for MbedTLS 3.5.0
       HOMEBREW_NO_AUTO_UPDATE: 1
     steps:
     - uses: actions/checkout@v4
@@ -154,7 +170,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        ssl: ["", -DMG_TLS=MG_TLS_BUILTIN]
+        ssl: [-DMG_TLS=MG_TLS_NONE, -DMG_TLS=MG_TLS_BUILTIN]
     name: examples ${{ matrix.ssl }}
     steps:
     - uses: actions/checkout@v4
@@ -285,10 +301,69 @@ jobs:
       with: { fetch-depth: 2 }
     - run: echo # nothing specific to install or do
     - run: make -C examples/arduino arduino-xiao
+# TODO():    - run: make -C examples/arduino arduino-esp32
+# TODO():    - run: make -C examples/arduino arduino-teensy41
 #   - run: make -C examples/arduino arduino-nano
     - run: make -C examples/arduino clean
 
 
+#  wizard_examples:
+#    runs-on: ubuntu-latest
+#    strategy:
+#      fail-fast: false
+#      matrix:
+#        example:
+#          - path: esp32/esp32-idf
+#    name: ${{ matrix.example.path }}
+#    env:
+#      GO: 0
+#    steps:
+#      - uses: actions/checkout@v4
+#        with: { fetch-depth: 2 }
+#      - run: echo # nothing specific to install or do
+#          fi
+#      - run: make -C examples/${{ matrix.example.path }} build
+
+  wizard_examples_arm:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        example:
+          - path: infineon/infineon-xmc7200
+          - path: nxp/frdm-mcxn947-make-baremetal-builtin
+          - path: nxp/frdm-mcxn947-make-freertos-builtin
+          - path: nxp/rt1020-evk-make-baremetal-builtin
+          - path: nxp/rt1060-evk-make-baremetal-builtin
+          - path: nxp/rt1170-evk-make-baremetal-builtin
+          - path: pico-sdk/pico-w-picosdk-baremetal-builtin
+          - path: pico-sdk/pico-2-w-picosdk-baremetal-builtin
+          - path: pico-sdk/w5500-evb-pico-picosdk-baremetal-builtin
+          - path: pico-sdk/w5500-evb-pico2-picosdk-baremetal-builtin
+          - path: stm32/nucleo-f429zi-make-baremetal-builtin
+          - path: stm32/nucleo-f429zi-make-freertos-builtin
+          - path: stm32/nucleo-f746zg-make-baremetal-builtin
+          - path: stm32/nucleo-f746zg-make-freertos-builtin
+          - path: stm32/nucleo-h563zi-make-baremetal-builtin
+          - path: stm32/nucleo-h563zi-make-freertos-builtin
+          - path: stm32/nucleo-h723zg-make-baremetal-builtin
+          - path: stm32/nucleo-h723zg-make-freertos-builtin
+          - path: stm32/nucleo-h743zi-make-baremetal-builtin
+          - path: stm32/nucleo-h743zi-make-freertos-builtin
+          - path: stm32/stm32h573i-dk-make-baremetal-builtin
+          - path: stm32/stm32h573i-dk-make-freertos-builtin
+          - path: ti/ek-tm4c1294xl-make-baremetal-builtin
+          - path: ti/ek-tm4c1294xl-make-freertos-builtin
+    name: ${{ matrix.example.path }}
+    env:
+      GO: 0
+    steps:
+      - uses: actions/checkout@v4
+        with: { fetch-depth: 2 }
+      - run: sudo apt -y update && sudo apt -y install gcc-arm-none-eabi
+      - run: make -C examples/${{ matrix.example.path }} build
+
+
   generic_examples:
     runs-on: ubuntu-latest
     strategy:
@@ -304,7 +379,6 @@ jobs:
     steps:
       - uses: actions/checkout@v4
         with: { fetch-depth: 2 }
-      - run: if ./test/match_changed_files.sh '^src|^examples/${{ matrix.example.path }}'; then echo GO=1 >> $GITHUB_ENV ; fi
       - run: echo # nothing specific to install or do
       - run: make -C examples/${{ matrix.example.path }} build
   
@@ -335,7 +409,7 @@ jobs:
           - path: nxp/nxp-lpcxpresso54628-lwip-freertos
           - path: nxp/nxp-twrk65f180m-lwip-freertos
           - path: nxp/nxp-twrkv58f220m-lwip-freertos
-          - path: rp2040/pico-rmii
+          - path: pico-sdk/pico-rmii
           - path: stm32/nucleo-f429zi-make-baremetal-builtin-rndis
           - path: stm32/nucleo-f746zg-make-baremetal-builtin-rndis
           - path: stm32/nucleo-g031-make-baremetal-builtin
@@ -370,30 +444,15 @@ jobs:
         ssl: ["", -DMG_TLS=MG_TLS_BUILTIN]
         example:
           - path: microchip/same54-xpro/device-dashboard
-          - path: nxp/rt1020-evk-make-baremetal-builtin
           - path: nxp/rt1020-evk-make-freertos-builtin
-          - path: nxp/rt1060-evk-make-baremetal-builtin
           - path: nxp/rt1060-evk-make-freertos-builtin
-          - path: nxp/rt1170-evk-make-baremetal-builtin
+          - path: nxp/rt1170-evk-make-freertos-builtin
           - path: renesas/ek-ra6m4-make-baremetal-builtin
-          - path: rp2040/pico-rndis-dashboard
-          - path: rp2040/pico-w
-          - path: rp2040/pico-w5500
-          - path: stm32/nucleo-f429zi-make-baremetal-builtin
-          - path: stm32/nucleo-f429zi-make-freertos-builtin
-          - path: stm32/nucleo-f746zg-make-baremetal-builtin
-          - path: stm32/nucleo-f746zg-make-freertos-builtin
+          - path: pico-sdk/pico-rndis-dashboard
+          - path: pico-sdk/pico-w-picosdk-freertos-lwip
+          - path: pico-sdk/pico-2-w-picosdk-freertos-lwip
           - path: stm32/nucleo-f746zg-make-freertos-tcp
           - path: stm32/nucleo-f746zg-make-baremetal-builtin-cmsis_driver
-          - path: stm32/nucleo-h563zi-make-baremetal-builtin
-          - path: stm32/nucleo-h563zi-make-freertos-builtin
-          - path: stm32/nucleo-h723zg-make-freertos-builtin
-          - path: stm32/nucleo-h743zi-make-baremetal-builtin
-          - path: stm32/nucleo-h743zi-make-freertos-builtin
-          - path: stm32/stm32h573i-dk-make-baremetal-builtin
-          - path: stm32/stm32h573i-dk-make-freertos-builtin
-          - path: ti/ek-tm4c1294xl-make-baremetal-builtin
-          - path: ti/ek-tm4c1294xl-make-freertos-builtin
     name: ${{ matrix.example.path }} ${{ matrix.ssl }}
     steps:
       - uses: actions/checkout@v4
@@ -421,7 +480,7 @@ jobs:
       fail-fast: false
       matrix:
         example:
-          - path: rp2040/pico-rndis-device
+          - path: pico-sdk/pico-rndis-device
     name: ${{ matrix.example.path }}
     steps:
       - uses: actions/checkout@v4
@@ -444,27 +503,12 @@ jobs:
 #      - run: make -C examples/${{ matrix.example.path }} device_dashboard
 #      - run: make -C examples/${{ matrix.example.path }} mqtt_dashboard
 
-  dual_examples_arm:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        example:
-          - path: stm32/nucleo-h723zg-make-baremetal-builtin
-    name: ${{ matrix.example.path }}
-    steps:
-      - uses: actions/checkout@v4
-        with: { fetch-depth: 2 }
-      - run: sudo apt -y update && sudo apt -y install gcc-arm-none-eabi
-      - run: make -C examples/${{ matrix.example.path }} device_dashboard
-      - run: make -C examples/${{ matrix.example.path }} mqtt_dashboard
-
   cube_examples:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
         with: { fetch-depth: 2 }
-      - run: echo # nothing specific to install or do
+      - run: sudo pip install yq
       - run: cd test/cube && make
 
   zephyr_examples:
@@ -473,7 +517,7 @@ jobs:
       - uses: actions/checkout@v4
         with: { fetch-depth: 2 }
       - run: sudo apt -y update && sudo apt -y install gcc-arm-none-eabi
-      - run: make -C examples/zephyr init
+      - run: make -C examples/zephyr init REPO=zephyrprojectrtos/ci:v0.26.14 # "no space left on device" with newers
       - name: minify manifest
         uses: mikefarah/yq@master
         with:
@@ -497,8 +541,8 @@ jobs:
     - run: make -C examples/stm32/nucleo-f746zg-make-freertos-tcp test VCON_API_KEY=${{secrets.VCON_API_KEY}}
     - name: Cube
       run: echo # nothing specific to install or do
-    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f746zg-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=5
-    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f746zg-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=5    
+#    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f746zg-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=5
+#    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f746zg-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=5    
     - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f746zg-cube-freertos-lwip VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=5
 
   test_f4:
@@ -512,8 +556,8 @@ jobs:
     - run: make -C examples/stm32/nucleo-f429zi-make-freertos-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
     - name: Cube
       run: echo # nothing specific to install or do
-    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f429zi-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=2
-    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f429zi-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=2
+#    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f429zi-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=2
+#    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f429zi-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=2
     - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f429zi-cube-freertos-lwip VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=2
 
   test_h743:
@@ -525,10 +569,10 @@ jobs:
       run: sudo apt -y update && sudo apt -y install gcc-arm-none-eabi
     - run: make -C examples/stm32/nucleo-h743zi-make-baremetal-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
     - run: make -C examples/stm32/nucleo-h743zi-make-freertos-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
-    - name: Cube
-      run: echo # nothing specific to install or do
-    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-h743zi-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=6
-    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-h743zi-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=6
+#    - name: Cube
+#      run: echo # nothing specific to install or do
+#    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-h743zi-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=6
+#    - run: make -C test/cube test PROJECTS=../../examples/stm32/nucleo-h743zi-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=6
 
   test_h723:
     runs-on: ubuntu-latest
@@ -578,7 +622,7 @@ jobs:
     - name: baremetal
       run: sudo apt -y update && sudo apt -y install gcc-arm-none-eabi
     - run: make -C examples/nxp/rt1170-evk-make-baremetal-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
-#    - run: make -C examples/nxp/rt1170-evk-make-freertos-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
+    - run: make -C examples/nxp/rt1170-evk-make-freertos-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
 
   test_ra6m4:
     runs-on: ubuntu-latest
@@ -617,5 +661,5 @@ jobs:
       with: { fetch-depth: 2 }
     - name: SDK
       run: sudo apt -y update && sudo apt -y install gcc-arm-none-eabi
-    - run:  make -C examples/rp2040/pico-w5500 test VCON_API_KEY=${{secrets.VCON_API_KEY}}
+    - run:  make -C examples/pico-sdk/w5500-evb-pico-picosdk-baremetal-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
 

.github/workflows/quicktest.yml

@@ -25,7 +25,7 @@ jobs:
       with: { fetch-depth: 2 }
     - run: if ./test/match_changed_files.sh '^test|^src/.*.[ch]' ; then echo GO=1 >> $GITHUB_ENV ; fi
     - if: ${{ env.GO == 1 }}
-      run: ./test/setup_ga_network.sh && make -C test ${{ matrix.target }}
+      run: make -C test ${{ matrix.target }}
   s390:
     runs-on: ubuntu-latest
     steps:
@@ -33,7 +33,7 @@ jobs:
       with: { fetch-depth: 2 }
     - run: if ./test/match_changed_files.sh '^test|^src/.*.[ch]' ; then echo GO=1 >> $GITHUB_ENV ; fi
     - if: ${{ env.GO == 1 }}
-      run: sudo apt -y update ; sudo apt -y install qemu binfmt-support qemu-user-static && docker run --rm --privileged multiarch/qemu-user-static --reset -p yes && make -C test s390
+      run: sudo apt -y update ; sudo apt -y install binfmt-support qemu-user-static && docker run --rm --privileged multiarch/qemu-user-static --reset -p yes && make -C test s390
   armhf:
     runs-on: ubuntu-latest
     steps:
@@ -41,7 +41,7 @@ jobs:
       with: { fetch-depth: 2 }
     - run: if ./test/match_changed_files.sh '^test|^src/.*.[ch]' ; then echo GO=1 >> $GITHUB_ENV ; fi
     - if: ${{ env.GO == 1 }}
-      run: sudo apt -y update ; sudo apt -y install qemu binfmt-support qemu-user-static && docker run --rm --privileged multiarch/qemu-user-static --reset -p yes && make -C test armhf
+      run: sudo apt -y update ; sudo apt -y install binfmt-support qemu-user-static && docker run --rm --privileged multiarch/qemu-user-static --reset -p yes && make -C test armhf
   unamalgamated-mg_prefix:
     runs-on: ubuntu-latest
     steps:
@@ -59,7 +59,7 @@ jobs:
     name: macos SSL=${{ matrix.ssl }}
     env:
       SSL: ${{ matrix.ssl }}
-      TFLAGS: -DNO_SNTP_CHECK
+      #TFLAGS: -DNO_SNTP_CHECK
       HOMEBREW_NO_AUTO_UPDATE: 1
     steps:
     - uses: actions/checkout@v4
@@ -173,6 +173,72 @@ jobs:
     - run: make -C test clean_tutorials_mac
 
 
+#  wizard_examples:
+#    runs-on: ubuntu-latest
+#    strategy:
+#      fail-fast: false
+#      matrix:
+#        example:
+#          - path: esp32/esp32-idf
+#    name: ${{ matrix.example.path }}
+#    env:
+#      GO: 0
+#    steps:
+#      - uses: actions/checkout@v4
+#        with: { fetch-depth: 2 }
+#      - run: |
+#          if ./test/match_changed_files.sh '^src'; then
+#            echo GO=1 >> $GITHUB_ENV
+#            # nothing specific to install or do
+#          fi
+#      - if: ${{ env.GO == 1 }}
+#        run: make -C examples/${{ matrix.example.path }} build
+
+  wizard_examples_arm:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        example:
+          - path: infineon/infineon-xmc7200
+          - path: nxp/frdm-mcxn947-make-baremetal-builtin
+          - path: nxp/frdm-mcxn947-make-freertos-builtin
+          - path: nxp/rt1020-evk-make-baremetal-builtin
+          - path: nxp/rt1060-evk-make-baremetal-builtin
+          - path: nxp/rt1170-evk-make-baremetal-builtin
+          - path: pico-sdk/pico-w-picosdk-baremetal-builtin
+          - path: pico-sdk/pico-2-w-picosdk-baremetal-builtin
+          - path: pico-sdk/w5500-evb-pico-picosdk-baremetal-builtin
+          - path: pico-sdk/w5500-evb-pico2-picosdk-baremetal-builtin
+          - path: stm32/nucleo-f429zi-make-baremetal-builtin
+          - path: stm32/nucleo-f429zi-make-freertos-builtin
+          - path: stm32/nucleo-f746zg-make-baremetal-builtin
+          - path: stm32/nucleo-f746zg-make-freertos-builtin
+          - path: stm32/nucleo-h563zi-make-baremetal-builtin
+          - path: stm32/nucleo-h563zi-make-freertos-builtin
+          - path: stm32/nucleo-h723zg-make-baremetal-builtin
+          - path: stm32/nucleo-h723zg-make-freertos-builtin
+          - path: stm32/nucleo-h743zi-make-baremetal-builtin
+          - path: stm32/nucleo-h743zi-make-freertos-builtin
+          - path: stm32/stm32h573i-dk-make-baremetal-builtin
+          - path: stm32/stm32h573i-dk-make-freertos-builtin
+          - path: ti/ek-tm4c1294xl-make-baremetal-builtin
+          - path: ti/ek-tm4c1294xl-make-freertos-builtin
+    name: ${{ matrix.example.path }}
+    env:
+      GO: 0
+    steps:
+      - uses: actions/checkout@v4
+        with: { fetch-depth: 2 }
+      - run: |
+          if ./test/match_changed_files.sh '^src'; then
+            echo GO=1 >> $GITHUB_ENV
+            sudo apt -y update && sudo apt -y install gcc-arm-none-eabi
+          fi
+      - if: ${{ env.GO == 1 }}
+        run: make -C examples/${{ matrix.example.path }} build
+
+
   generic_examples:
     runs-on: ubuntu-latest
     strategy:
@@ -242,30 +308,15 @@ jobs:
       matrix:
         example:
           - path: microchip/same54-xpro/device-dashboard
-          - path: nxp/rt1020-evk-make-baremetal-builtin
           - path: nxp/rt1020-evk-make-freertos-builtin
-          - path: nxp/rt1060-evk-make-baremetal-builtin
           - path: nxp/rt1060-evk-make-freertos-builtin
-          - path: nxp/rt1170-evk-make-baremetal-builtin
+          - path: nxp/rt1170-evk-make-freertos-builtin
           - path: renesas/ek-ra6m4-make-baremetal-builtin
-          - path: rp2040/pico-rndis-dashboard
-          - path: rp2040/pico-w
-          - path: rp2040/pico-w5500
-          - path: stm32/nucleo-f429zi-make-baremetal-builtin
-          - path: stm32/nucleo-f429zi-make-freertos-builtin
-          - path: stm32/nucleo-f746zg-make-baremetal-builtin
-          - path: stm32/nucleo-f746zg-make-freertos-builtin
+          - path: pico-sdk/pico-rndis-dashboard
+          - path: pico-sdk/pico-w-picosdk-freertos-lwip
+          - path: pico-sdk/pico-2-w-picosdk-freertos-lwip
           - path: stm32/nucleo-f746zg-make-freertos-tcp
           - path: stm32/nucleo-f746zg-make-baremetal-builtin-cmsis_driver
-          - path: stm32/nucleo-h563zi-make-baremetal-builtin
-          - path: stm32/nucleo-h563zi-make-freertos-builtin
-          - path: stm32/nucleo-h723zg-make-freertos-builtin
-          - path: stm32/nucleo-h743zi-make-baremetal-builtin
-          - path: stm32/nucleo-h743zi-make-freertos-builtin
-          - path: stm32/stm32h573i-dk-make-baremetal-builtin
-          - path: stm32/stm32h573i-dk-make-freertos-builtin
-          - path: ti/ek-tm4c1294xl-make-baremetal-builtin
-          - path: ti/ek-tm4c1294xl-make-freertos-builtin
     name: ${{ matrix.example.path }}
     env:
       GO: 0
@@ -307,7 +358,7 @@ jobs:
       fail-fast: false
       matrix:
         example:
-          - path: rp2040/pico-rndis-device
+          - path: pico-sdk/pico-rndis-device
     name: ${{ matrix.example.path }}
     env:
       GO: 0
@@ -322,64 +373,6 @@ jobs:
       - if: ${{ env.GO == 1 }}
         run: make -C examples/${{ matrix.example.path }} build
       
-#  dual_examples:
-#    runs-on: ubuntu-latest
-#    strategy:
-#      fail-fast: false
-#      matrix:
-#        example:
-#          - path: 
-#    name: ${{ matrix.example.path }}
-#    env:
-#      GO: 0
-#    steps:
-#      - uses: actions/checkout@v4
-#        with: { fetch-depth: 2 }
-#      - run: |
-#          if ./test/match_changed_files.sh '^src|examples/device-dashboard|examples/mqtt-dashboard/device|^examples/${{ matrix.example.path }}'; then
-#            echo GO=1 >> $GITHUB_ENV
-#            # nothing specific to install or do
-#          fi
-#      - if: ${{ env.GO == 1 }}
-#        run: |
-#          if ./test/match_changed_files.sh '^src|examples/device-dashboard|^examples/${{ matrix.example.path }}'; then
-#            make -C examples/${{ matrix.example.path }} device_dashboard
-#          fi
-#      - if: ${{ env.GO == 1 }}
-#        run: |
-#          if ./test/match_changed_files.sh '^src|examples/mqtt-dashboard/device|^examples/${{ matrix.example.path }}'; then
-#            make -C examples/${{ matrix.example.path }} mqtt_dashboard
-#          fi
-
-  dual_examples_arm:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        example:
-          - path: stm32/nucleo-h723zg-make-baremetal-builtin
-    name: ${{ matrix.example.path }}
-    env:
-      GO: 0
-    steps:
-      - uses: actions/checkout@v4
-        with: { fetch-depth: 2 }
-      - run: |
-          if ./test/match_changed_files.sh '^src|examples/device-dashboard|examples/mqtt-dashboard/device|^examples/${{ matrix.example.path }}'; then
-            echo GO=1 >> $GITHUB_ENV
-            sudo apt -y update && sudo apt -y install gcc-arm-none-eabi
-          fi
-      - if: ${{ env.GO == 1 }}
-        run: |
-          if ./test/match_changed_files.sh '^src|examples/device-dashboard|^examples/${{ matrix.example.path }}'; then
-            make -C examples/${{ matrix.example.path }} device_dashboard
-          fi
-      - if: ${{ env.GO == 1 }}
-        run: |
-          if ./test/match_changed_files.sh '^src|examples/mqtt-dashboard/device|^examples/${{ matrix.example.path }}'; then
-            make -C examples/${{ matrix.example.path }} mqtt_dashboard
-          fi
-
   cube_examples:
     runs-on: ubuntu-latest
     env:
@@ -390,7 +383,7 @@ jobs:
       - run: |
           if ./test/match_changed_files.sh '^src|examples/stm32/nucleo-*-cube-*'; then
             echo GO=1 >> $GITHUB_ENV
-            # nothing specific to install or do
+            sudo pip install yq
           fi
       - if: ${{ env.GO == 1 }}
         run: cd test/cube && make
@@ -432,16 +425,16 @@ jobs:
           echo GO=1 >> $GITHUB_ENV
           # nothing specific to install or do
         fi
-    - if: ${{ env.GO == 1 }}
-      run: |
-        if ./test/match_changed_files.sh 'examples/stm32/nucleo-f746zg-cube-baremetal-builtin'; then
-          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f746zg-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=5
-        fi
-    - if: ${{ env.GO == 1 }}
-      run: |
-        if ./test/match_changed_files.sh 'examples/stm32/nucleo-f746zg-cube-freertos-builtin'; then
-          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f746zg-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=5    
-        fi
+#    - if: ${{ env.GO == 1 }}
+#      run: |
+#        if ./test/match_changed_files.sh 'examples/stm32/nucleo-f746zg-cube-baremetal-builtin'; then
+#          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f746zg-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=5
+#        fi
+#    - if: ${{ env.GO == 1 }}
+#      run: |
+#        if ./test/match_changed_files.sh 'examples/stm32/nucleo-f746zg-cube-freertos-builtin'; then
+#          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f746zg-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=5    
+#        fi
     - if: ${{ env.GO == 1 }}
       run: |
         if ./test/match_changed_files.sh 'examples/stm32/nucleo-f746zg-cube-freertos-lwip'; then
@@ -480,16 +473,16 @@ jobs:
           echo GO=1 >> $GITHUB_ENV
           # nothing specific to install or do
         fi
-    - if: ${{ env.GO == 1 }}
-      run: |
-        if ./test/match_changed_files.sh 'examples/stm32/nucleo-f429zi-cube-baremetal-builtin'; then
-          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f429zi-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=2
-        fi
-    - if: ${{ env.GO == 1 }}
-      run: |
-        if ./test/match_changed_files.sh 'examples/stm32/nucleo-f429zi-cube-freertos-builtin'; then
-          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f429zi-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=2
-        fi
+#    - if: ${{ env.GO == 1 }}
+#      run: |
+#        if ./test/match_changed_files.sh 'examples/stm32/nucleo-f429zi-cube-baremetal-builtin'; then
+#          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f429zi-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=2
+#        fi
+#    - if: ${{ env.GO == 1 }}
+#      run: |
+#        if ./test/match_changed_files.sh 'examples/stm32/nucleo-f429zi-cube-freertos-builtin'; then
+#          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-f429zi-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=2
+#        fi
     - if: ${{ env.GO == 1 }}
       run: |
         if ./test/match_changed_files.sh 'examples/stm32/nucleo-f429zi-cube-freertos-lwip'; then
@@ -520,23 +513,23 @@ jobs:
         if ./test/match_changed_files.sh 'examples/stm32/nucleo-h743zi-make-freertos-builtin'; then
           make -C examples/stm32/nucleo-h743zi-make-freertos-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
         fi
-    - name: Cube
-      run: |
-        echo GO=0 >> $GITHUB_ENV
-        if ./test/match_changed_files.sh 'examples/stm32/nucleo-h74.*-cube-'; then
-          echo GO=1 >> $GITHUB_ENV
-          # nothing specific to install or do
-        fi
-    - if: ${{ env.GO == 1 }}
-      run: |
-        if ./test/match_changed_files.sh 'examples/stm32/nucleo-h743zi-cube-baremetal-builtin'; then
-          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-h743zi-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=6
-        fi
-    - if: ${{ env.GO == 1 }}
-      run: |
-        if ./test/match_changed_files.sh 'examples/stm32/nucleo-h743zi-cube-freertos-builtin'; then
-          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-h743zi-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=6
-        fi
+#    - name: Cube
+#      run: |
+#        echo GO=0 >> $GITHUB_ENV
+#        if ./test/match_changed_files.sh 'examples/stm32/nucleo-h74.*-cube-'; then
+#          echo GO=1 >> $GITHUB_ENV
+#          # nothing specific to install or do
+#        fi
+#    - if: ${{ env.GO == 1 }}
+#      run: |
+#        if ./test/match_changed_files.sh 'examples/stm32/nucleo-h743zi-cube-baremetal-builtin'; then
+#          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-h743zi-cube-baremetal-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=6
+#        fi
+#    - if: ${{ env.GO == 1 }}
+#      run: |
+#        if ./test/match_changed_files.sh 'examples/stm32/nucleo-h743zi-cube-freertos-builtin'; then
+#          make -C test/cube test PROJECTS=../../examples/stm32/nucleo-h743zi-cube-freertos-builtin VCON_API_KEY=${{secrets.VCON_API_KEY}} DEVICE=6
+#        fi
 
   test_h723:
     runs-on: ubuntu-latest
@@ -657,11 +650,11 @@ jobs:
         if ./test/match_changed_files.sh '^src|examples/device-dashboard|examples/nxp/rt1170-evk-make-baremetal-builtin'; then
           make -C examples/nxp/rt1170-evk-make-baremetal-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
         fi
-#    - if: ${{ env.GO == 1 }}
-#      run: |
-#        if ./test/match_changed_files.sh 'examples/nxp/rt1170-evk-make-freertos-builtin'; then
-#          make -C examples/nxp/rt1170-evk-make-freertos-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
-#        fi
+    - if: ${{ env.GO == 1 }}
+      run: |
+        if ./test/match_changed_files.sh 'examples/nxp/rt1170-evk-make-freertos-builtin'; then
+          make -C examples/nxp/rt1170-evk-make-freertos-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
+        fi
 
   test_ra6m4:
     runs-on: ubuntu-latest
@@ -745,10 +738,10 @@ jobs:
       with: { fetch-depth: 2 }
     - name: SDK
       run: |
-        if ./test/match_changed_files.sh "^src|examples/device-dashboard|examples/rp2040/pico-w5500" ; then
+        if ./test/match_changed_files.sh "^src" ; then
           echo GO=1 >> $GITHUB_ENV
           sudo apt -y update && sudo apt -y install gcc-arm-none-eabi
         fi
     - if: ${{ env.GO == 1 }}
-      run:  make -C examples/rp2040/pico-w5500 test VCON_API_KEY=${{secrets.VCON_API_KEY}}
+      run:  make -C examples/pico-sdk/w5500-evb-pico-picosdk-baremetal-builtin test VCON_API_KEY=${{secrets.VCON_API_KEY}}
 

LICENSE

@@ -1,5 +1,5 @@
 Copyright (c) 2004-2013 Sergey Lyubka
-Copyright (c) 2013-2024 Cesanta Software Limited
+Copyright (c) 2013-2025 Cesanta Software Limited
 All rights reserved
 
 This software is dual-licensed: you can redistribute it and/or modify

README.md

@@ -4,6 +4,7 @@
 [![Build Status]( https://github.com/cesanta/mongoose/workflows/build/badge.svg)](https://github.com/cesanta/mongoose/actions)
 [![Code Coverage](https://codecov.io/gh/cesanta/mongoose/branch/master/graph/badge.svg)](https://codecov.io/gh/cesanta/mongoose)
 [![Fuzzing Status](https://oss-fuzz-build-logs.storage.googleapis.com/badges/mongoose.svg)](https://bugs.chromium.org/p/oss-fuzz/issues/list?sort=-opened&can=1&q=proj:mongoose)
+[![Gurubase](https://img.shields.io/badge/Gurubase-Ask%20Mongoose%20Guru-006BFF)](https://gurubase.io/g/mongoose)
 
 Mongoose is a network library for C/C++.  It provides event-driven non-blocking
 APIs for TCP, UDP, HTTP, WebSocket, MQTT, and other protocols.  It is designed
@@ -14,7 +15,7 @@ robust, and easy. Features include:
 
 - Cross-platform:
   - works on Linux/UNIX, MacOS, Windows, Android
-  - works on STM32, NXP, ESP32, NRF52, TI, Microchip, and other
+  - works on ST, NXP, ESP32, Nordic, TI, Microchip, Infineon, Renesas and other chips
   - write code once - and it'll work everywhere
   - ideal for the unification of the network infrastructure code across company
 - Built-in protocols: plain TCP/UDP, SNTP, HTTP, MQTT, Websocket, and other
@@ -70,7 +71,7 @@ HTTP server implements a REST API that returns current time. JSON formatting:
 static void ev_handler(struct mg_connection *c, int ev, void *ev_data) {
   if (ev == MG_EV_HTTP_MSG) {
     struct mg_http_message *hm = (struct mg_http_message *) ev_data;
-    if (mg_http_match_uri(hm, "/api/time/get")) {
+    if (mg_match(hm->uri, mg_str("/api/time/get"), NULL)) {
       mg_http_reply(c, 200, "", "{%m:%lu}\n", MG_ESC("time"), time(NULL));
     } else {
       mg_http_reply(c, 500, "", "{%m:%m}\n", MG_ESC("error"), MG_ESC("Unsupported URI")); 

examples/arduino/Makefile

@@ -14,6 +14,7 @@ arduino-xiao-board:
 	./arduino/arduino --install-boards Seeeduino:samd
 
 arduino-xiao: arduino arduino-xiao-board
+	cd sim800-mqtt && ../arduino/arduino --verbose --verify --board Seeeduino:samd:seeed_XIAO_m0 sim800-mqtt.ino
 	cd w5500-http && ../arduino/arduino --verbose --verify --board Seeeduino:samd:seeed_XIAO_m0 w5500-http.ino
 	cd w5500-mqtt && ../arduino/arduino --verbose --verify --board Seeeduino:samd:seeed_XIAO_m0 w5500-mqtt.ino
 
@@ -21,6 +22,18 @@ arduino-nano: arduino
 	cd w5500-http && ../arduino/arduino --pref compiler.cpp.extra_flags=-DMG_ENABLE_LOG=0 --verbose --verify --board arduino:avr:nano w5500-http.ino
 	cd w5500-mqtt && ../arduino/arduino --pref compiler.cpp.extra_flags=-DMG_ENABLE_LOG=0 --verbose --verify --board arduino:avr:nano w5500-mqtt.ino
 
+arduino-esp32: arduino
+#	cd esp32-http && ../arduino/arduino --verbose --verify --board  esp32-http.ino
+# 	esp32-mqtt
+
+arduino-teensy41: arduino
+#	cd teensy41-http && ../arduino/arduino --verbose --verify --board  teensy41-http.ino
+
+
+
+
+
+
 clean:
 	rm -rf arduino 
 

examples/arduino/esp32-http/esp32-http.ino

@@ -0,0 +1,63 @@
+#include "mongoose.h"
+#include "WiFi.h"
+
+#define LED_PIN LED_BUILTIN
+#define WIFI_SSID "wifi_network_name"  // Change this
+#define WIFI_PASS "wifi_password"      // And this
+
+struct mg_mgr mgr;
+
+// Crude function to get available RAM, for quick profiling
+size_t getFreeRAM(void) {
+  size_t size = 0, increment = 1024;
+  void *p;
+  while ((p = malloc(size)) != NULL) free(p), size += increment;
+  return size;
+}
+
+void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
+  if (ev == MG_EV_HTTP_MSG) {
+    struct mg_http_message *hm = (struct mg_http_message *)ev_data;
+    if (mg_match(hm->uri, mg_str("/api/led/on"), NULL)) {
+      digitalWrite(LED_PIN, HIGH);
+      mg_http_reply(c, 200, "", "{%m: %d}\n", MG_ESC("led"), digitalRead(LED_PIN));
+    } else if (mg_match(hm->uri, mg_str("/api/led/off"), NULL)) {
+      digitalWrite(LED_PIN, LOW);
+      mg_http_reply(c, 200, "", "{%m: %d}\n", MG_ESC("led"), digitalRead(LED_PIN));
+    } else {
+      mg_http_reply(c, 200, "", "ok, free RAM: %u\n", xPortGetFreeHeapSize());
+    }
+  }
+}
+
+void setup() {
+  pinMode(LED_PIN, OUTPUT);
+  Serial.begin(115200);
+  while (!Serial) delay(50);
+
+  WiFi.mode(WIFI_STA);
+  WiFi.begin(WIFI_SSID, WIFI_PASS);
+  while(WiFi.status() != WL_CONNECTED) Serial.print("."), delay(100);
+
+  Serial.println("\nConnected to the WiFi network");
+  Serial.print("IP Address: ");
+  Serial.println(WiFi.localIP());
+
+  mg_mgr_init(&mgr);
+  mg_log_set(MG_LL_DEBUG);
+  mg_log_set_fn([](char ch, void *) { Serial.print(ch); }, NULL);
+  mg_http_listen(&mgr, "http://0.0.0.0", http_ev_handler, NULL);
+}
+
+void loop() {
+  mg_mgr_poll(&mgr, 0);
+}
+
+extern "C" int lwip_hook_ip6_input(struct pbuf *p, struct netif *inp) __attribute__((weak));
+extern "C" int lwip_hook_ip6_input(struct pbuf *p, struct netif *inp) {
+  if (ip6_addr_isany_val(inp->ip6_addr[0].u_addr.ip6)) {
+    pbuf_free(p);
+    return 1;
+  }
+  return 0;
+}

examples/arduino/esp32-http/mongoose_config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define MG_ARCH MG_ARCH_ESP32

examples/arduino/esp32-mqtt/esp32-mqtt.ino

@@ -0,0 +1,102 @@
+#include "WiFi.h"
+#include "mongoose.h"
+
+#define WIFI_SSID "wifi_network_name"  // Change this
+#define WIFI_PASS "wifi_password"      // And this
+
+#define MQTT_SERVER "mqtt://broker.hivemq.com:1883"
+#define MQTT_SUB_TOPIC "mg/rx"  // Subscribe to this topic
+#define MQTT_PUB_TOPIC "mg/tx"  // Publish to this topic
+
+#define LED_PIN 0
+
+struct mg_mgr mgr;
+struct mg_connection *mqtt_connection;
+
+void mqtt_publish(const char *message) {
+  struct mg_mqtt_opts opts = {};
+  opts.topic = mg_str(MQTT_PUB_TOPIC);
+  opts.message = mg_str(message);
+  if (mqtt_connection) mg_mqtt_pub(mqtt_connection, &opts);
+}
+
+// Crude function to get available RAM, for quick profiling
+size_t getFreeRAM(void) {
+  size_t size = 0, increment = 100;
+  void *p;
+  while ((p = malloc(size)) != NULL) free(p), size += increment;
+  return size;
+}
+
+// Implement LED control over MQTT: "on" and "off" commands
+void handle_command(struct mg_str msg) {
+  if (msg.len == 3 && memcmp(msg.buf, "off", 3) == 0) {
+    digitalWrite(LED_PIN, LOW);
+    mqtt_publish("done - off");
+  } else if (msg.len == 2 && memcmp(msg.buf, "on", 2) == 0) {
+    digitalWrite(LED_PIN, HIGH);
+    mqtt_publish("done - on");
+  }
+  MG_INFO(("Free RAM: %u bytes", getFreeRAM()));
+}
+
+static void mqtt_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
+  if (ev == MG_EV_MQTT_OPEN) {
+    MG_INFO(("%lu CONNECTED to %s", c->id, MQTT_SERVER));
+    struct mg_mqtt_opts opts = {};
+    opts.topic = mg_str(MQTT_SUB_TOPIC);
+    mg_mqtt_sub(c, &opts);
+    MG_INFO(("%lu SUBSCRIBED to %s", c->id, MQTT_SUB_TOPIC));
+  } else if (ev == MG_EV_MQTT_MSG) {
+    // Received MQTT message
+    struct mg_mqtt_message *mm = (struct mg_mqtt_message *) ev_data;
+    MG_INFO(("%lu RECEIVED %.*s <- %.*s", c->id, (int) mm->data.len,
+             mm->data.buf, (int) mm->topic.len, mm->topic.buf));
+    handle_command(mm->data);
+  } else if (ev == MG_EV_CLOSE) {
+    MG_INFO(("%lu CLOSED", c->id));
+    mqtt_connection = NULL;
+  }
+}
+
+void reconnect_if_not_connected(void) {
+  if (mqtt_connection == NULL) {
+    struct mg_mqtt_opts opts = {};
+    opts.clean = true;
+    mqtt_connection =
+        mg_mqtt_connect(&mgr, MQTT_SERVER, &opts, mqtt_ev_handler, NULL);
+  }
+}
+
+void setup() {
+  pinMode(LED_PIN, OUTPUT);
+  Serial.begin(115200);
+  while (!Serial) delay(50);
+
+  WiFi.mode(WIFI_STA);
+  WiFi.begin(WIFI_SSID, WIFI_PASS);
+  while (WiFi.status() != WL_CONNECTED) Serial.print("."), delay(100);
+
+  Serial.println("\nConnected to the WiFi network");
+  Serial.print("IP Address: ");
+  Serial.println(WiFi.localIP());
+
+  mg_mgr_init(&mgr);
+  mg_log_set(MG_LL_DEBUG);
+  mg_log_set_fn([](char ch, void *) { Serial.print(ch); }, NULL);
+}
+
+void loop() {
+  mg_mgr_poll(&mgr, 1);          // Process network events
+  reconnect_if_not_connected();  // Reconnect to MQTT server if needed
+}
+
+extern "C" int lwip_hook_ip6_input(struct pbuf *p, struct netif *inp)
+    __attribute__((weak));
+extern "C" int lwip_hook_ip6_input(struct pbuf *p, struct netif *inp) {
+  if (ip6_addr_isany_val(inp->ip6_addr[0].u_addr.ip6)) {
+    pbuf_free(p);
+    return 1;
+  }
+  return 0;
+}

examples/arduino/esp32-mqtt/mongoose_config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define MG_ARCH MG_ARCH_ESP32

examples/arduino/sim800-mqtt/mongoose_config.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "Arduino.h"
+
+#include <errno.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <time.h>
+
+#define MG_ARCH MG_ARCH_CUSTOM
+#define MG_ENABLE_SOCKET 0
+#define MG_ENABLE_TCPIP 1
+#define MG_ENABLE_DRIVER_PPP 1
+#define MG_ENABLE_TCPIP_DRIVER_INIT 0
+#define MG_ENABLE_TCPIP_PRINT_DEBUG_STATS 0
+#define MG_ENABLE_CUSTOM_MILLIS 1
+#define MG_ENABLE_CUSTOM_RANDOM 1
+#define MG_TLS MG_TLS_BUILTIN
+#define MG_IO_SIZE 128

examples/arduino/sim800-mqtt/sim800-mqtt.ino

@@ -0,0 +1,122 @@
+#include <SoftwareSerial.h>
+#include "mongoose.h"
+
+#define MQTT_SERVER "mqtt://broker.hivemq.com:8883"
+#define MQTT_SUB_TOPIC "mg/rx"  // Subscribe to this topic
+#define MQTT_PUB_TOPIC "mg/tx"  // Publish to this topic
+
+static const char *script[] = {
+  "AT\r\n", "*OK\r\n",
+  "ATZ\r\n", "*OK\r\n",
+  "AT+CPIN?\r\n", "*OK\r\n",
+  "AT+CNMI=0,0,0,0,0\r\n", "*OK\r\n",
+  "AT+CGDCONT=1,\"IP\",\"iot.1nce.net\"\r\n", "*OK\r\n",
+  "AT+CGDATA=\"PPP\",1\r\n", "*CONNECT\r\n",
+  NULL,
+};
+
+// Visit https://mongoose.ws/tls/ and copy-paste CA certificate for your server
+#define TLS_CA \
+  ""
+
+// We use Serial1 or software serial to communicate with the modem
+#define LED_PIN LED_BUILTIN
+#define RST_PIN 10
+#define ModemSerial Serial1
+//#define RX_PIN 9
+//#define TX_PIN 8
+//SoftwareSerial ModemSerial(RX_PIN, TX_PIN);
+
+struct mg_connection *mqtt_connection;
+struct mg_tcpip_driver_ppp_data driver_data;
+struct mg_mgr mgr;                                     // Mongoose event manager
+struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}};  // Network interface
+
+uint64_t mg_millis(void) {
+  return millis();
+}
+bool mg_random(void *buf, size_t len) {  // For TLS
+  uint8_t *p = (uint8_t *) buf;
+  while (len--) *p++ = (unsigned char) (rand() & 255);
+  return true;
+}
+
+void mqtt_publish(const char *message) {
+  struct mg_mqtt_opts opts = {};
+  opts.topic = mg_str(MQTT_PUB_TOPIC);
+  opts.message = mg_str(message);
+  if (mqtt_connection) mg_mqtt_pub(mqtt_connection, &opts);
+}
+
+void handle_command(struct mg_str msg) {
+  if (msg.len == 3 && memcmp(msg.buf, "off", 3) == 0) {
+    digitalWrite(LED_PIN, LOW);
+    mqtt_publish("done - off");
+  } else if (msg.len == 2 && memcmp(msg.buf, "on", 2) == 0) {
+    digitalWrite(LED_PIN, HIGH);
+    mqtt_publish("done - on");
+  }
+}
+
+static void mqtt_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
+  if (ev == MG_EV_CONNECT && mg_url_is_ssl(MQTT_SERVER)) {
+    struct mg_tls_opts opts = {};
+    opts.ca = mg_str(TLS_CA);
+    mg_tls_init(c, &opts);
+  }
+  if (ev == MG_EV_MQTT_OPEN) {
+    MG_INFO(("%lu CONNECTED to %s", c->id, MQTT_SERVER));
+    struct mg_mqtt_opts opts = {};
+    opts.topic = mg_str(MQTT_SUB_TOPIC);
+    mg_mqtt_sub(c, &opts);
+    MG_INFO(("%lu SUBSCRIBED to %s", c->id, MQTT_SUB_TOPIC));
+  } else if (ev == MG_EV_MQTT_MSG) {
+    // Received MQTT message
+    struct mg_mqtt_message *mm = (struct mg_mqtt_message *) ev_data;
+    MG_INFO(("%lu RECEIVED %.*s <- %.*s", c->id, (int) mm->data.len,
+             mm->data.buf, (int) mm->topic.len, mm->topic.buf));
+    handle_command(mm->data);
+  } else if (ev == MG_EV_CLOSE) {
+    MG_INFO(("%lu CLOSED", c->id));
+    mqtt_connection = NULL;
+  }
+}
+
+void reconnect_if_not_connected(void) {
+  if (mif.state == MG_TCPIP_STATE_READY && mqtt_connection == NULL) {
+    struct mg_mqtt_opts opts = {};
+    opts.clean = true;
+    mqtt_connection =
+        mg_mqtt_connect(&mgr, MQTT_SERVER, &opts, mqtt_ev_handler, NULL);
+  }
+}
+
+void setup() {
+  Serial.begin(115200);       // Initialise serial for logs
+  while (!Serial) delay(50);  // for debug output
+
+  pinMode(LED_PIN, OUTPUT);  // Initialise pins
+  pinMode(RST_PIN, OUTPUT);
+  digitalWrite(RST_PIN, HIGH);
+  //pinMode(RX_PIN, INPUT);   // Only required for
+  //pinMode(TX_PIN, OUTPUT);  // software serial
+  ModemSerial.begin(115200);  // Serial for modem communication
+
+  mg_mgr_init(&mgr);        // Initialise Mongoose event manager
+  mg_log_set(MG_LL_DEBUG);  // Set debug log level
+  mg_log_set_fn([](char c, void *) { Serial.print(c); }, NULL);  // Log serial
+
+  mif.driver = &mg_tcpip_driver_ppp;  // Initialise built-in TCP/IP stack
+  mif.driver_data = &driver_data;     // with the cellular driver
+  driver_data.script = script;
+  driver_data.reset = [](void *) { digitalWrite(RST_PIN, LOW); delay(1); digitalWrite(RST_PIN, HIGH); },
+  driver_data.tx = [](void *, uint8_t c) { ModemSerial.write(c); },
+  driver_data.rx = [](void *) { return ModemSerial.available() ? ModemSerial.read() : -1; },
+  mg_tcpip_init(&mgr, &mif);
+  mif.enable_dhcp_client = false;
+}
+
+void loop() {
+  mg_mgr_poll(&mgr, 1);          // Process network events
+  reconnect_if_not_connected();  // Reconnect to MQTT server if needed
+}

examples/arduino/w5500-http/mongoose_config.h

@@ -8,9 +8,11 @@
 #include <time.h>
 
 #define MG_ARCH MG_ARCH_CUSTOM
-#define MG_ENABLE_SOCKET 0
 #define MG_ENABLE_TCPIP 1
 #define MG_ENABLE_DRIVER_W5500 1
-#define mkdir(a, b) (-1)
-#define MG_IO_SIZE 128
-//#define MG_ENABLE_LOG 0
+#define MG_ENABLE_TCPIP_DRIVER_INIT 0
+#define MG_ENABLE_TCPIP_PRINT_DEBUG_STATS 0
+#define MG_ENABLE_CUSTOM_MILLIS 1
+#define MG_ENABLE_CUSTOM_RANDOM 1
+#define MG_TLS MG_TLS_BUILTIN
+#define MG_IO_SIZE 256

examples/arduino/w5500-http/w5500-http.ino

@@ -1,47 +1,108 @@
 #include <SPI.h>
 #include "mongoose.h"
 
-#define SS_PIN 3    // Slave select pin
-struct mg_mgr mgr;  // Mongoose event manager
+#define LED_PIN LED_BUILTIN  // LED pin
+#define SS_PIN 17            // Slave select pin for the W5500 module
+
 struct mg_tcpip_spi spi = {
-    NULL,                                               // SPI data
-    [](void *) { digitalWrite(SS_PIN, LOW); },          // begin transation
-    [](void *) { digitalWrite(SS_PIN, HIGH); },         // end transaction
-    [](void *, uint8_t c) { return SPI.transfer(c); },  // execute transaction
+    NULL,  // SPI metadata
+    [](void *) { digitalWrite(SS_PIN, LOW); SPI.beginTransaction(SPISettings()); },
+    [](void *) { digitalWrite(SS_PIN, HIGH); SPI.endTransaction(); },
+    [](void *, uint8_t c) { return SPI.transfer(c); }, // Execute transaction
 };
-struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}};  // network interface
+struct mg_mgr mgr;                                     // Mongoose event manager
+struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}};  // Network interface
+
+// Used by Mongoose for time tracking
+uint64_t mg_millis(void) {
+  return millis();
+}
+
+// Used by Mongoose to generate random data
+bool mg_random(void *buf, size_t len) {  // For TLS
+  uint8_t *p = (uint8_t *) buf;
+  while (len--) *p++ = (unsigned char) (rand() & 255);
+  return true;
+}
+
+// Crude function to get available RAM, for quick profiling
+extern "C" char *sbrk(int);
+extern char *__brkval;
+int getFreeRAM() {
+  char top;
+#ifdef __arm__
+  return &top - (char *) sbrk(0);
+#elif defined(CORE_TEENSY) || (ARDUINO > 103 && ARDUINO != 151)
+  return &top - __brkval;
+#else
+  return __brkval ? &top - __brkval : &top - __malloc_heap_start;
+#endif
+}
+
+static void http_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
+  if (ev == MG_EV_HTTP_MSG) {
+    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
+    if (mg_match(hm->uri, mg_str("/api/led/on"), NULL)) {
+      digitalWrite(LED_PIN, HIGH);
+      mg_http_reply(c, 200, "", "{%m: %d}\n", MG_ESC("led"), digitalRead(LED_PIN));
+    } else if (mg_match(hm->uri, mg_str("/api/led/off"), NULL)) {
+      digitalWrite(LED_PIN, LOW);
+      mg_http_reply(c, 200, "", "{%m: %d}\n", MG_ESC("led"), digitalRead(LED_PIN));
+    } else {
+      mg_http_reply(c, 200, "", "ok, free RAM: %u\n", getFreeRAM());
+    }
+  }
+  // Initialise TLS if we're a TLS listener
+  if (ev == MG_EV_ACCEPT && c->fn_data != NULL) {
+    struct mg_tls_opts opts;
+    memset(&opts, 0, sizeof(opts));
+
+    // Generated by https://mongoose.ws/tls/
+#define TLS_CERT \
+  "-----BEGIN CERTIFICATE-----\n" \
+  "MIIBkzCCATqgAwIBAgIEZ3E9lzAKBggqhkjOPQQDAjATMREwDwYDVQQDEwhNb25n\n" \
+  "b29zZTAeFw0yNDEyMjkxMjE2MjNaFw0zNDEyMjcxMjE2MjNaMBQxEjAQBgNVBAMT\n" \
+  "CWxvY2FsaG9zdDBZMBMGByqGSM49AgEGCCqGSM49AwEHA0IABHxxuByu5K2k7DYq\n" \
+  "b3eQsHb3VY5NWglWun7axh69OWF7V9OUUyON1y8ISirL0Gj5ZPOogIgrB9iOcz6K\n" \
+  "q9n8NQOjezB5MA4GA1UdDwEB/wQEAwIFoDATBgNVHSUEDDAKBggrBgEFBQcDATAM\n" \
+  "BgNVHRMBAf8EAjAAMB8GA1UdIwQYMBaAFGn8GpPWaM0JC7U4zlg+bCljSjLoMCMG\n" \
+  "A1UdEQQcMBqCCWxvY2FsaG9zdIINMTkyLjE2OC4wLjEwMDAKBggqhkjOPQQDAgNH\n" \
+  "ADBEAiAr1fO3QLLm+vjYarctNI+gfnxxB4edRTRmcFWHmBS8oQIgY5lkq2JCwATG\n" \
+  "YsVQUmS+2Tbc7ij7lkduXO42pvr/0fw=\n" \
+  "-----END CERTIFICATE-----"
+
+  #define TLS_KEY \
+  "-----BEGIN EC PRIVATE KEY-----\n" \
+  "MHcCAQEEIHKu84eEw9dX8nez82g3F94OsZJ14LVbAN+OBW+++V2poAoGCCqGSM49\n" \
+  "AwEHoUQDQgAEfHG4HK7kraTsNipvd5CwdvdVjk1aCVa6ftrGHr05YXtX05RTI43X\n" \
+  "LwhKKsvQaPlk86iAiCsH2I5zPoqr2fw1Aw==\n" \
+  "-----END EC PRIVATE KEY-----"
+
+    opts.cert = mg_str(TLS_CERT);
+    opts.key = mg_str(TLS_KEY);
+
+    mg_tls_init(c, &opts);
+  }
+}
 
 void setup() {
-  Serial.begin(115200);
-  pinMode(SS_PIN, OUTPUT);
-  SPI.begin();
+  Serial.begin(115200);       // Initialise serial
+  while (!Serial) delay(50);  // for debug output
 
-  // Set logging function to a serial print
-  mg_log_set_fn([](char ch, void *) { Serial.print(ch); }, NULL);
-  mg_mgr_init(&mgr);
+  SPI.begin();               // Iniitialise SPI
+  pinMode(SS_PIN, OUTPUT);   // to communicate with W5500 Ethernet module
+  pinMode(LED_PIN, OUTPUT);  // Initialise LED
 
-  delay(3000);
-  MG_INFO(("Starting TCP/IP stack..."));
+  mg_mgr_init(&mgr);        // Initialise Mongoose event manager
+  mg_log_set(MG_LL_DEBUG);  // Set debug log level
+  mg_log_set_fn([](char ch, void *) { Serial.print(ch); }, NULL);  // Log serial
+  mif.driver = &mg_tcpip_driver_w5500;  // Use W5500 built-in driver
+  mif.driver_data = &spi;               // Pass SPI interface to W5500 driver
+  mg_tcpip_init(&mgr, &mif);            // Initialise built-in TCP/IP stack
 
-  mif.driver = &mg_tcpip_driver_w5500;
-  mif.driver_data = &spi;
-  mg_tcpip_init(&mgr, &mif);
-
-  // Start a 5 sec timer, print status message periodically
-  mg_timer_add(
-      &mgr, 5000, MG_TIMER_REPEAT,
-      [](void *) {
-        MG_INFO(("ethernet: %s", mg_tcpip_driver_w5500.up(&mif) ? "up" : "down"));
-      },
-      NULL);
-
-  // Setup HTTP listener. Respond "ok" on any HTTP request
-  mg_http_listen(
-      &mgr, "http://0.0.0.0",
-      [](struct mg_connection *c, int ev, void *ev_data) {
-        if (ev == MG_EV_HTTP_MSG) mg_http_reply(c, 200, "", "ok\n");
-      },
-      &mgr);
+  // Setup HTTP & HTTPS listeners. Respond "ok" on any HTTP request
+  mg_http_listen(&mgr, "http://0.0.0.0:80", http_ev_handler, NULL);
+  mg_http_listen(&mgr, "https://0.0.0.0:443", http_ev_handler, (void *) 1);
 }
 
 void loop() {

examples/arduino/w5500-mqtt/mongoose_config.h

@@ -11,6 +11,10 @@
 #define MG_ENABLE_SOCKET 0
 #define MG_ENABLE_TCPIP 1
 #define MG_ENABLE_DRIVER_W5500 1
-#define mkdir(a, b) (-1)
-#define MG_IO_SIZE 512
-//#define MG_ENABLE_LOG 0
+#define MG_ENABLE_TCPIP_DRIVER_INIT 0
+#define MG_ENABLE_TCPIP_PRINT_DEBUG_STATS 0
+#define MG_ENABLE_CUSTOM_MILLIS 1
+#define MG_ENABLE_CUSTOM_RANDOM 1
+// #define MG_TLS MG_TLS_BUILTIN
+#define MG_IO_SIZE 128
+

examples/arduino/w5500-mqtt/net.c

@@ -1,58 +0,0 @@
-#include "net.h"
-
-#define MQTT_SERVER "mqtt://broker.hivemq.com:1883"
-struct mg_connection *mqtt_connection;
-const char *mqtt_subscribe_topic = "mg/rx";
-const char *mqtt_publish_topic = "mg/tx";
-
-struct mg_mgr mgr;  // Mongoose event manager
-struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}};  // network interface
-
-void mqtt_publish(const char *message) {
-  struct mg_mqtt_opts opts = {};
-  opts.topic = mg_str(mqtt_publish_topic);
-  opts.message = mg_str(message);
-  if (mqtt_connection) mg_mqtt_pub(mqtt_connection, &opts);
-}
-
-static void fn(struct mg_connection *c, int ev, void *ev_data) {
-  if (ev == MG_EV_MQTT_OPEN) {
-    MG_INFO(("%lu CONNECTED to %s", c->id, MQTT_SERVER));
-    struct mg_mqtt_opts opts = {};
-    opts.topic = mg_str(mqtt_subscribe_topic);
-    mg_mqtt_sub(c, &opts);
-    MG_INFO(("%lu SUBSCRIBED to %s", c->id, mqtt_subscribe_topic));
-  } else if (ev == MG_EV_MQTT_MSG) {
-    // Received MQTT message
-    struct mg_mqtt_message *mm = (struct mg_mqtt_message *) ev_data;
-    MG_INFO(("%lu RECEIVED %.*s <- %.*s", c->id, (int) mm->data.len,
-             mm->data.buf, (int) mm->topic.len, mm->topic.buf));
-    exec_command(mm->data.buf, mm->data.len);
-  } else if (ev == MG_EV_CLOSE) {
-    MG_INFO(("%lu CLOSED", c->id));
-    mqtt_connection = NULL;
-  }
-}
-
-static void timer_fn(void *arg) {
-  struct mg_mgr *mgr = (struct mg_mgr *) arg;
-  struct mg_mqtt_opts opts;
-  memset(&opts, 0, sizeof(opts));
-  opts.clean = true;
-  if (mif.state == MG_TCPIP_STATE_READY && mqtt_connection == NULL) {
-    mqtt_connection = mg_mqtt_connect(mgr, MQTT_SERVER, &opts, fn, NULL);
-  }
-  // MG_INFO(("Eth: %d, MQTT: %p", mif.state, mqtt_connection));
-}
-
-void net_init(void) {
-  // Set Mongoose logging function to a serial print
-  mg_mgr_init(&mgr);
-
-  mif.driver = &mg_tcpip_driver_w5500;
-  mif.driver_data = &spi;
-  mg_tcpip_init(&mgr, &mif);
-
-  // Start a timer that keeps MQTT connection alive
-  mg_timer_add(&mgr, 3000, MG_TIMER_REPEAT, timer_fn, &mgr);
-}

examples/arduino/w5500-mqtt/net.h

@@ -1,16 +0,0 @@
-#pragma once
-#include "mongoose.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern struct mg_tcpip_spi spi;
-extern struct mg_mgr mgr;
-void mqtt_publish(const char *message);
-void net_init(void);
-void exec_command(const char *req, size_t req_len);
-
-#ifdef __cplusplus
-}
-#endif

examples/arduino/w5500-mqtt/w5500-mqtt.ino

@@ -1,51 +1,103 @@
 #include <SPI.h>
-#include "net.h"
+#include "mongoose.h"
 
-#define SS_PIN 17   // Slave select pin
+#define MQTT_SERVER "mqtt://broker.hivemq.com:1883"
+#define MQTT_SUB_TOPIC "mg/rx"  // Subscribe to this topic
+#define MQTT_PUB_TOPIC "mg/tx"  // Publish to this topic
+#define SS_PIN 2                // Slave select pin
+#define LED_PIN 21              // LED pin
+
+struct mg_connection *mqtt_connection;
 struct mg_tcpip_spi spi = {
-    NULL,                                               // SPI data
-    [](void *) { digitalWrite(SS_PIN, LOW); },          // Begin transaction
-    [](void *) { digitalWrite(SS_PIN, HIGH); },         // End transaction
-    [](void *, uint8_t c) { return SPI.transfer(c); },  // Execute transaction
+    NULL,  // SPI metadata
+    [](void *) { digitalWrite(SS_PIN, LOW); SPI.beginTransaction(SPISettings()); },
+    [](void *) { digitalWrite(SS_PIN, HIGH); SPI.endTransaction(); },
+    [](void *, uint8_t c) { return SPI.transfer(c); }, // Execute transaction
 };
+struct mg_mgr mgr;                                     // Mongoose event manager
+struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}};  // Network interface
 
-void exec_command(const char *req, size_t req_len) {
-  char res[100];
-  if (req_len == 2 && strncmp(req, "on", req_len) == 0) {
-    digitalWrite(LED_BUILTIN, true);
-    snprintf(res, sizeof(res), "LED on");
-  } else if (req_len == 3 && strncmp(req, "off", req_len) == 0) {
-    digitalWrite(LED_BUILTIN, false);
-    snprintf(res, sizeof(res), "LED off");
-  } else {
-    snprintf(res, sizeof(res), "Unknown command: [%.*s]", (int) req_len, req);
-  }
-  Serial.println(res);
-  mqtt_publish(res);
+uint64_t mg_millis(void) {
+  return millis();
+}
+bool mg_random(void *buf, size_t len) {  // For TLS
+  uint8_t *p = (uint8_t *) buf;
+  while (len--) *p++ = (unsigned char) (rand() & 255);
+  return true;
 }
 
-static void process_input(char c) {
-  static char buf[100];
-  static size_t len = 0;
-  char response[100];
-  if (c != '\n' && c != '\0') buf[len++] = c;  // Append to the buffer
-  if (len >= sizeof(buf)) len = 0;             // On overflow, reset
-  if (c == '\n' && len > 0) {
-    exec_command(buf, len);
-    len = 0;
+void mqtt_publish(const char *message) {
+  struct mg_mqtt_opts opts = {};
+  opts.topic = mg_str(MQTT_PUB_TOPIC);
+  opts.message = mg_str(message);
+  if (mqtt_connection) mg_mqtt_pub(mqtt_connection, &opts);
+}
+
+// Crude function to get available RAM, for quick profiling
+size_t getFreeRAM(void) {
+  size_t size = 0, increment = 100;
+  void *p;
+  while ((p = malloc(size)) != NULL) free(p), size += increment;
+  return size;
+}
+
+// Implement LED control over MQTT: "on" and "off" commands
+void handle_command(struct mg_str msg) {
+  if (msg.len == 3 && memcmp(msg.buf, "off", 3) == 0) {
+    digitalWrite(LED_PIN, LOW);
+    mqtt_publish("done - off");
+  } else if (msg.len == 2 && memcmp(msg.buf, "on", 2) == 0) {
+    digitalWrite(LED_PIN, HIGH);
+    mqtt_publish("done - on");
+  }
+  MG_INFO(("Free RAM: %u bytes", getFreeRAM()));
+}
+
+static void mqtt_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
+  if (ev == MG_EV_MQTT_OPEN) {
+    MG_INFO(("%lu CONNECTED to %s", c->id, MQTT_SERVER));
+    struct mg_mqtt_opts opts = {};
+    opts.topic = mg_str(MQTT_SUB_TOPIC);
+    mg_mqtt_sub(c, &opts);
+    MG_INFO(("%lu SUBSCRIBED to %s", c->id, MQTT_SUB_TOPIC));
+  } else if (ev == MG_EV_MQTT_MSG) {
+    // Received MQTT message
+    struct mg_mqtt_message *mm = (struct mg_mqtt_message *) ev_data;
+    MG_INFO(("%lu RECEIVED %.*s <- %.*s", c->id, (int) mm->data.len,
+             mm->data.buf, (int) mm->topic.len, mm->topic.buf));
+    handle_command(mm->data);
+  } else if (ev == MG_EV_CLOSE) {
+    MG_INFO(("%lu CLOSED", c->id));
+    mqtt_connection = NULL;
+  }
+}
+
+void reconnect_if_not_connected(void) {
+  if (mif.state == MG_TCPIP_STATE_READY && mqtt_connection == NULL) {
+    struct mg_mqtt_opts opts = {};
+    opts.clean = true;
+    mqtt_connection =
+        mg_mqtt_connect(&mgr, MQTT_SERVER, &opts, mqtt_ev_handler, NULL);
   }
 }
 
 void setup() {
-  Serial.begin(115200);
-  SPI.begin();
-  pinMode(SS_PIN, OUTPUT);
-  pinMode(LED_BUILTIN, OUTPUT);
-  mg_log_set_fn([](char ch, void *) { Serial.print(ch); }, NULL);
-  net_init();
+  Serial.begin(115200);       // Initialise serial
+  while (!Serial) delay(50);  // for debug output
+
+  SPI.begin();                   // Iniitialise SPI
+  pinMode(SS_PIN, OUTPUT);       // to communicate with W5500 Ethernet module
+  pinMode(LED_PIN, OUTPUT);  // Initialise LED
+
+  mg_mgr_init(&mgr);        // Initialise Mongoose event manager
+  mg_log_set(MG_LL_DEBUG);  // Set debug log level
+  mg_log_set_fn([](char ch, void *) { Serial.print(ch); }, NULL);  // Log serial
+  mif.driver = &mg_tcpip_driver_w5500;  // Use W5500 built-in driver
+  mif.driver_data = &spi;               // Pass SPI interface to W5500 driver
+  mg_tcpip_init(&mgr, &mif);            // Initialise built-in TCP/IP stack
 }
 
 void loop() {
-  if (Serial.available()) process_input(Serial.read());
-  mg_mgr_poll(&mgr, 1);
+  mg_mgr_poll(&mgr, 1);          // Process network events
+  reconnect_if_not_connected();  // Reconnect to MQTT server if needed
 }

examples/device-dashboard/net.c

@@ -26,12 +26,6 @@ static struct settings s_settings = {true, 1, 57, NULL};
 static const char *s_json_header =
     "Content-Type: application/json\r\n"
     "Cache-Control: no-cache\r\n";
-static uint64_t s_boot_timestamp = 0;  // Updated by SNTP
-
-// This is for newlib and TLS (mbedTLS)
-uint64_t mg_now(void) {
-  return mg_millis() + s_boot_timestamp;
-}
 
 int ui_event_next(int no, struct ui_event *e) {
   if (no < 0 || no >= MAX_EVENTS_NO) return 0;
@@ -49,23 +43,8 @@ int ui_event_next(int no, struct ui_event *e) {
   return no + 1;
 }
 
-// SNTP connection event handler. When we get a response from an SNTP server,
-// adjust s_boot_timestamp. We'll get a valid time from that point on
-static void sfn(struct mg_connection *c, int ev, void *ev_data) {
-  uint64_t *expiration_time = (uint64_t *) c->data;
-  if (ev == MG_EV_OPEN) {
-    *expiration_time = mg_millis() + 3000;  // Store expiration time in 3s
-  } else if (ev == MG_EV_SNTP_TIME) {
-    uint64_t t = *(uint64_t *) ev_data;
-    s_boot_timestamp = t - mg_millis();
-    c->is_closing = 1;
-  } else if (ev == MG_EV_POLL) {
-    if (mg_millis() > *expiration_time) c->is_closing = 1;
-  }
-}
-
 static void timer_sntp_fn(void *param) {  // SNTP timer function. Sync up time
-  mg_sntp_connect(param, "udp://time.google.com:123", sfn, NULL);
+  mg_sntp_connect(param, "udp://time.google.com:123", NULL, NULL);
 }
 
 // Parse HTTP requests, return authenticated user or NULL
@@ -98,19 +77,22 @@ static struct user *authenticate(struct mg_http_message *hm) {
 
 static void handle_login(struct mg_connection *c, struct user *u) {
   char cookie[256];
+  const char *cookie_name = c->is_tls ? "secure_access_token" : "access_token";
   mg_snprintf(cookie, sizeof(cookie),
-              "Set-Cookie: access_token=%s; Path=/; "
+              "Set-Cookie: %s=%s; Path=/; "
               "%sHttpOnly; SameSite=Lax; Max-Age=%d\r\n",
-              u->access_token, c->is_tls ? "Secure; " : "", 3600 * 24);
+              cookie_name, u->access_token,
+              c->is_tls ? "Secure; " : "", 3600 * 24);
   mg_http_reply(c, 200, cookie, "{%m:%m}", MG_ESC("user"), MG_ESC(u->name));
 }
 
 static void handle_logout(struct mg_connection *c) {
   char cookie[256];
+  const char *cookie_name = c->is_tls ? "secure_access_token" : "access_token";
   mg_snprintf(cookie, sizeof(cookie),
-              "Set-Cookie: access_token=; Path=/; "
+              "Set-Cookie: %s=; Path=/; "
               "Expires=Thu, 01 Jan 1970 00:00:00 UTC; "
-              "%sHttpOnly; Max-Age=0; \r\n",
+              "%sHttpOnly; Max-Age=0; \r\n", cookie_name,
               c->is_tls ? "Secure; " : "");
   mg_http_reply(c, 200, cookie, "true\n");
 }
@@ -217,49 +199,9 @@ static void handle_firmware_upload(struct mg_connection *c,
     mg_http_reply(c, 500, "", "mg_ota_end() failed\n", tot);
   } else {
     mg_http_reply(c, 200, s_json_header, "true\n");
-    if (data.len == 0) {
-      // Successful mg_ota_end() called, schedule device reboot
-      mg_timer_add(c->mgr, 500, 0, (void (*)(void *)) mg_device_reset, NULL);
-    }
   }
 }
 
-static void handle_firmware_commit(struct mg_connection *c) {
-  mg_http_reply(c, 200, s_json_header, "%s\n",
-                mg_ota_commit() ? "true" : "false");
-}
-
-static void handle_firmware_rollback(struct mg_connection *c) {
-  mg_http_reply(c, 200, s_json_header, "%s\n",
-                mg_ota_rollback() ? "true" : "false");
-}
-
-static size_t print_status(void (*out)(char, void *), void *ptr, va_list *ap) {
-  int fw = va_arg(*ap, int);
-  return mg_xprintf(out, ptr, "{%m:%d,%m:%c%lx%c,%m:%u,%m:%u}\n",
-                    MG_ESC("status"), mg_ota_status(fw), MG_ESC("crc32"), '"',
-                    mg_ota_crc32(fw), '"', MG_ESC("size"), mg_ota_size(fw),
-                    MG_ESC("timestamp"), mg_ota_timestamp(fw));
-}
-
-static void handle_firmware_status(struct mg_connection *c) {
-  mg_http_reply(c, 200, s_json_header, "[%M,%M]\n", print_status,
-                MG_FIRMWARE_CURRENT, print_status, MG_FIRMWARE_PREVIOUS);
-}
-
-static void handle_device_reset(struct mg_connection *c) {
-  mg_http_reply(c, 200, s_json_header, "true\n");
-  mg_timer_add(c->mgr, 500, 0, (void (*)(void *)) mg_device_reset, NULL);
-}
-
-static void handle_device_eraselast(struct mg_connection *c) {
-  size_t ss = mg_flash_sector_size(), size = mg_flash_size();
-  char *base = (char *) mg_flash_start(), *last = base + size - ss;
-  if (mg_flash_bank() == 2) last -= size / 2;
-  mg_flash_erase(last);
-  mg_http_reply(c, 200, s_json_header, "true\n");
-}
-
 // HTTP request handler function
 static void fn(struct mg_connection *c, int ev, void *ev_data) {
   if (ev == MG_EV_ACCEPT) {
@@ -291,16 +233,6 @@ static void fn(struct mg_connection *c, int ev, void *ev_data) {
       handle_settings_set(c, hm->body);
     } else if (mg_match(hm->uri, mg_str("/api/firmware/upload"), NULL)) {
       handle_firmware_upload(c, hm);
-    } else if (mg_match(hm->uri, mg_str("/api/firmware/commit"), NULL)) {
-      handle_firmware_commit(c);
-    } else if (mg_match(hm->uri, mg_str("/api/firmware/rollback"), NULL)) {
-      handle_firmware_rollback(c);
-    } else if (mg_match(hm->uri, mg_str("/api/firmware/status"), NULL)) {
-      handle_firmware_status(c);
-    } else if (mg_match(hm->uri, mg_str("/api/device/reset"), NULL)) {
-      handle_device_reset(c);
-    } else if (mg_match(hm->uri, mg_str("/api/device/eraselast"), NULL)) {
-      handle_device_eraselast(c);
     } else {
       struct mg_http_serve_opts opts;
       memset(&opts, 0, sizeof(opts));

examples/esp32/device-dashboard/main/main.c

@@ -27,7 +27,15 @@ void app_main(void) {
   for (;;) mg_mgr_poll(&mgr, 1000);  // Infinite event loop
 }
 
-#if MG_DEVICE == MG_DEVICE_CUSTOM
+#if MG_OTA == MG_OTA_CUSTOM
+enum {
+  MG_OTA_UNAVAILABLE = 0,  // No OTA information is present
+  MG_OTA_FIRST_BOOT = 1,   // Device booting the first time after the OTA
+  MG_OTA_UNCOMMITTED = 2,  // Ditto, but marking us for the rollback
+  MG_OTA_COMMITTED = 3     // The firmware is good
+};
+enum { MG_FIRMWARE_CURRENT = 0, MG_FIRMWARE_PREVIOUS = 1 };
+
 void *mg_flash_start(void) {
   return NULL;
 }
@@ -57,9 +65,7 @@ bool mg_flash_write(void *addr, const void *buf, size_t len) {
 void mg_device_reset(void) {
   esp_restart();
 }
-#endif
 
-#if MG_OTA == MG_OTA_CUSTOM
 #include "esp_app_format.h"
 #include "esp_ota_ops.h"
 
@@ -121,6 +127,14 @@ bool check_fw_header(const void* buf, size_t len) {
   return true;
 }
 
+size_t mg_ota_size(int fw) {
+  const esp_partition_t *p = get_partition_from_fw(fw);
+  if (NULL == p) {
+    return 0;
+  }
+  return p->size;
+}
+
 bool mg_ota_begin(size_t new_firmware_size) {
   rx_checked = false;
   if (s_size) {
@@ -255,11 +269,4 @@ uint32_t mg_ota_timestamp(int fw) {
   return mktime(&datetime);
 }
 
-size_t mg_ota_size(int fw) {
-  const esp_partition_t *p = get_partition_from_fw(fw);
-  if (NULL == p) {
-    return 0;
-  }
-  return p->size;
-}
 #endif

examples/esp32/device-dashboard/main/mongoose_config.h

@@ -3,4 +3,3 @@
 #define MG_ENABLE_PACKED_FS 1
 #define MG_TLS MG_TLS_NONE	// change to 'MG_TLS_MBED' to enable TLS
 #define MG_OTA MG_OTA_CUSTOM
-#define MG_DEVICE MG_DEVICE_CUSTOM

examples/infineon/infineon-xmc7200/Makefile

@@ -1,41 +1,29 @@
-CFLAGS  = -W -Wall -Werror -Wextra  -Wundef -Wshadow -Wdouble-promotion
-CFLAGS += -Wformat-truncation -fno-common # -Wconversion is not SDK-friendly
-CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
-CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_xmc7/devices/COMPONENT_CAT1C/include/
-CFLAGS += -Icmsis_xmc7/devices/COMPONENT_CAT1C/include/ip/
-CFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA)
-LDSCRIPT = link.ld
-LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map 
-
-SOURCES = main.c hal.c startup.c
-CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS	# Make startup code work as expected
-
-# Mongoose options are defined in mongoose_custom.h
-SOURCES += mongoose.c net.c packed_fs.c
-
-# Example specific build options. See README.md
-CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\" -DHTTPS_URL=\"https://0.0.0.0/\"
-
-ifeq ($(OS),Windows_NT)
-  RM = cmd /C del /Q /F /S
-else
-  RM = rm -rf
-endif
+BOARD = xmc7200
+IDE = GCC+make
+RTOS = baremetal
+WIZARD_URL ?= http://mongoose.ws/wizard
 
 all build example: firmware.bin
 
-firmware.bin: firmware.elf
-	arm-none-eabi-objcopy -O binary $< $@
+firmware.bin: wizard
+	make -C wizard CFLAGS_EXTRA=$(CFLAGS_EXTRA) && mv wizard/firmware.bin ./
 
-firmware.elf: cmsis_core cmsis_xmc7 $(SOURCES) hal.h link.ld Makefile
-	arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@
-	arm-none-eabi-size $@
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard ; rm mongoose.[ch] ; ln -s ../../../../mongoose.c ; ln -s ../../../../mongoose.h
 
-cmsis_core:     # ARM CMSIS core headers
-	git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
-cmsis_xmc7:
-	git clone https://github.com/Infineon/mtb-pdl-cat1.git $@
-	echo "" > cmsis_xmc7/devices/COMPONENT_CAT1C/include/ip/system_cat1c.h
+
+# Automated remote test. Requires env variable VCON_API_KEY set. See https://vcon.io/automated-firmware-tests/
+DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/??
+update: firmware.bin
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
+
+test update: CFLAGS_EXTRA ="-DUART_DEBUG=USART1"
+test: update
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=15 | tee /tmp/output.txt
+	grep 'READY, IP:' /tmp/output.txt       # Check for network init
 
 clean:
-	$(RM) firmware.* *.su cmsis_core cmsis_xmc7 *.zip
+	rm -rf firmware.* wizard*

examples/infineon/infineon-xmc7200/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=xmc7200&ide=GCC+make&rtos=baremetal&file=README.md)

examples/infineon/infineon-xmc7200/hal.c

@@ -1,146 +0,0 @@
-// Copyright (c) 2024 Cesanta Software Limited
-// All rights reserved
-
-#include "hal.h"
-
-static volatile uint64_t s_ticks;  // Milliseconds since boot
-void SysTick_Handler(void) {       // SyStick IRQ handler, triggered every 1ms
-  s_ticks++;
-}
-
-void mg_random(void *buf, size_t len) {  // Use on-board RNG
-  for (size_t n = 0; n < len; n += sizeof(uint32_t)) {
-    uint32_t r = rng_read();
-    memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r));
-  }
-}
-
-uint64_t mg_millis(void) {  // Let Mongoose use our uptime function
-  return s_ticks;           // Return number of milliseconds since boot
-}
-
-void hal_init(void) {
-  clock_init();                            // Set system clock to SYS_FREQUENCY
-  SystemCoreClock = SYS_FREQUENCY;         // Update SystemCoreClock global var
-  SysTick_Config(SystemCoreClock / 1000);  // Sys tick every 1ms
-  rng_init();                              // Initialise random number generator
-
-  uart_init(UART_DEBUG, 115200);  // Initialise UART
-  gpio_output(LED1);              // Initialise LED1
-  gpio_output(LED2);              // Initialise LED2
-  gpio_output(LED3);              // Initialise LED3
-  ethernet_init();                // Initialise Ethernet pins
-}
-
-#if defined(__ARMCC_VERSION)
-// Keil specific - implement IO printf redirection
-int fputc(int c, FILE *stream) {
-  if (stream == stdout || stream == stderr) uart_write_byte(UART_DEBUG, c);
-  return c;
-}
-#elif defined(__GNUC__)
-// ARM GCC specific. ARM GCC is shipped with Newlib C library.
-// Implement newlib syscalls:
-//      _sbrk() for malloc
-//      _write() for printf redirection
-//      the rest are just stubs
-#include <sys/stat.h>  // For _fstat()
-
-uint32_t SystemCoreClock;
-void SystemInit(void) {  // Called automatically by startup code
-}
-
-int _fstat(int fd, struct stat *st) {
-  (void) fd, (void) st;
-  return -1;
-}
-
-extern unsigned char _end[];  // End of data section, start of heap. See link.ld
-static unsigned char *s_current_heap_end = _end;
-
-size_t hal_ram_used(void) {
-  return (size_t) (s_current_heap_end - _end);
-}
-
-size_t hal_ram_free(void) {
-  unsigned char endofstack;
-  return (size_t) (&endofstack - s_current_heap_end);
-}
-
-void *_sbrk(int incr) {
-  unsigned char *prev_heap;
-  unsigned char *heap_end = (unsigned char *) ((size_t) &heap_end - 256);
-  prev_heap = s_current_heap_end;
-  // Check how much space we  got from the heap end to the stack end
-  if (s_current_heap_end + incr > heap_end) return (void *) -1;
-  s_current_heap_end += incr;
-  return prev_heap;
-}
-
-int _open(const char *path) {
-  (void) path;
-  return -1;
-}
-
-int _close(int fd) {
-  (void) fd;
-  return -1;
-}
-
-int _isatty(int fd) {
-  (void) fd;
-  return 1;
-}
-
-int _lseek(int fd, int ptr, int dir) {
-  (void) fd, (void) ptr, (void) dir;
-  return 0;
-}
-
-void _exit(int status) {
-  (void) status;
-  for (;;) asm volatile("BKPT #0");
-}
-
-void _kill(int pid, int sig) {
-  (void) pid, (void) sig;
-}
-
-int _getpid(void) {
-  return -1;
-}
-
-int _write(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  if (fd == 1) uart_write_buf(UART_DEBUG, ptr, (size_t) len);
-  return -1;
-}
-
-int _read(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  return -1;
-}
-
-int _link(const char *a, const char *b) {
-  (void) a, (void) b;
-  return -1;
-}
-
-int _unlink(const char *a) {
-  (void) a;
-  return -1;
-}
-
-int _stat(const char *path, struct stat *st) {
-  (void) path, (void) st;
-  return -1;
-}
-
-int mkdir(const char *path, mode_t mode) {
-  (void) path, (void) mode;
-  return -1;
-}
-
-void _init(void) {
-}
-#endif                 // __GNUC__

examples/infineon/infineon-xmc7200/hal.h

@@ -1,244 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-
-#pragma once
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <string.h>
-
-#define LED1 PIN(16, 1)
-#define LED2 PIN(16, 2)
-#define LED3 PIN(16, 3)
-
-#include "xmc7200d_e272k8384.h"
-
-#define BIT(x) (1UL << (x))
-#define CLRSET(reg, clear, set) ((reg) = ((reg) & ~(clear)) | (set))
-#define PIN(bank, num) ((bank << 8) | (num))
-#define PINNO(pin) (pin & 255)
-#define PINBANK(pin) (pin >> 8)
-
-void hal_init(void);
-size_t hal_ram_free(void);
-size_t hal_ram_used(void);
-
-static inline void spin(volatile uint32_t count) {
-  while (count--) (void) 0;
-}
-
-extern uint32_t SystemCoreClock;
-
-enum {PLL_FEEDBACK = 50, PLL_REF = 1, PLL_OUT = 4};
-#define CLK_IMO 8000000UL
-#define SYS_FREQUENCY ((CLK_IMO * PLL_FEEDBACK) / (PLL_REF * PLL_OUT))
-
-#ifndef UART_DEBUG
-#define UART_DEBUG SCB3
-#endif
-
-enum { GPIO_MODE_INPUT, GPIO_MODE_OUTPUT, GPIO_MODE_AF, GPIO_MODE_ANALOG };
-enum { GPIO_HIGHZ = 0, GPIO_PULLUP = 2, GPIO_PULLDOWN = 3, GPIO_OPENDRAIN_LOW = 4,
-       GPIO_OPENDRAIN_HIGH = 5, GPIO_STRONG = 6, GPIO_PULLUP_DOWN = 7};
-enum { GPIO_SPEED_LOW = 3, GPIO_SPEED_MEDIUM = 2, GPIO_SPEED_HIGH = 0};
-#undef GPIO
-#define GPIO_TypeDef GPIO_PRT_Type
-#define GPIO(N) ((GPIO_TypeDef *) (GPIO_BASE + 0x80 * (N)))
-
-static GPIO_TypeDef *gpio_bank(uint16_t pin) { return GPIO(PINBANK(pin)); }
-
-static inline void gpio_init(uint16_t pin, uint8_t mode, uint8_t type,
-                             uint8_t speed, uint8_t pull, uint8_t af) {
-	(void) pin, (void) mode, (void) type, (void) speed, (void) pull, (void) af;
-  GPIO_TypeDef *gpio = gpio_bank(pin);
-  uint8_t pinno = PINNO(pin);
-  uint32_t msk, pos;
-
-  // configure input / output direction
-  if (mode == GPIO_MODE_INPUT) {
-    gpio->CFG |= 1 << (4 * pinno + 3); // enable input buffer (IN_ENx)
-  }
-
-  if (af || (mode == GPIO_MODE_AF && af)) {
-    // configure alternate function
-    HSIOM_PRT_Type* hsiom = ((HSIOM_PRT_Type*) HSIOM) + PINBANK(pin);
-    volatile uint32_t *port_sel = pinno < 4 ? &hsiom->PORT_SEL0 : &hsiom->PORT_SEL1;
-    pos = 8 * (pinno % 4), msk = 0x1f << pos;
-    *port_sel &= ~msk, *port_sel |= af << pos;
-  }
-
-  // configure driver mode
-  msk = 7, pos = 4 * pinno;
-  CLRSET(gpio->CFG, msk << pos, type << pos);
-
-  // configure speed
-  msk = 3, pos = 2 * pinno + 16;
-  CLRSET(gpio->CFG_OUT, msk << pos, speed << pos);
-
-  if (mode == GPIO_MODE_OUTPUT /*&& af == 0*/) {
-    gpio->OUT_SET = (1 << pinno);
-  }
-}
-
-static inline void gpio_input(uint16_t pin) {
-	gpio_init(pin, GPIO_MODE_INPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH,
-	            0, 0);
-}
-
-static inline void gpio_output(uint16_t pin) {
-	gpio_init(pin, GPIO_MODE_OUTPUT, GPIO_STRONG, GPIO_SPEED_MEDIUM,
-	            0, 0);
-}
-
-static inline bool gpio_read(uint16_t pin) {
-  GPIO_TypeDef *gpio = gpio_bank(pin);
-  uint8_t pinno = PINNO(pin);
-  if (gpio->CFG & (1 << (4 * pinno + 3))) {
-    // pin mode is input, reading from GPIO_PRT_IN
-    return gpio->IN & (1 << pinno);
-  } else {
-    // pin mode is output, reading from GPIO_PRT_OUT
-    return gpio->OUT & (1 << pinno);
-  }
-}
-
-static inline void gpio_write(uint16_t pin, bool value) {
-	GPIO_TypeDef *gpio = gpio_bank(pin);
-  uint8_t pinno = PINNO(pin);
-  if (value) {
-    gpio->OUT_SET = 1 << pinno;
-  } else {
-    gpio->OUT_CLR = 1 << pinno;
-  }
-}
-
-static inline void gpio_toggle(uint16_t pin) {
-  gpio_write(pin, !gpio_read(pin));
-}
-
-static inline void uart_init(volatile CySCB_Type *uart, unsigned long baud) {
-  (void) uart, (void) baud;
-  uint16_t rx = 0, tx = 0;
-  if (uart == SCB3) {
-    rx = PIN(13, 0), tx = PIN(13, 1);
-  } else {
-    return; // unsupported uart
-  }
-
-  // set pins
-  gpio_init(rx, GPIO_MODE_INPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH, 0, 17);
-  gpio_init(tx, GPIO_MODE_OUTPUT, GPIO_STRONG, GPIO_SPEED_HIGH, 0, 17);
-
-  // enable peripheral clock (18.6.2)
-  // compute divider first (we choose 24 bit divider 0)
-  unsigned long div = 0, frac = 0, ovs = 16;
-  div = SYS_FREQUENCY / (baud * ovs);
-  if (div == 0) div = 1;
-  frac = SYS_FREQUENCY % (baud * ovs);
-  frac = (frac * 100) / (baud * ovs);
-  PERI_PCLK->GR[1].DIV_CMD = (3 << PERI_PCLK_GR_DIV_CMD_TYPE_SEL_Pos) |
-                             PERI_PCLK_GR_DIV_CMD_PA_DIV_SEL_Msk |
-                             PERI_PCLK_GR_DIV_CMD_PA_TYPE_SEL_Msk;
-  PERI_PCLK->GR[1].DIV_CMD |= PERI_PCLK_GR_DIV_CMD_DISABLE_Msk; // disable divider
-  PERI_PCLK->GR[1].DIV_24_5_CTL[0] = (((uint8_t) (div - 1)) << PERI_PCLK_GR_DIV_24_5_CTL_INT24_DIV_Pos) |
-                                     (frac << PERI_PCLK_GR_DIV_24_5_CTL_FRAC5_DIV_Pos);
-  PERI_PCLK->GR[1].DIV_CMD = (3 << PERI_PCLK_GR_DIV_CMD_TYPE_SEL_Pos) |
-                             PERI_PCLK_GR_DIV_CMD_PA_DIV_SEL_Msk |
-                             PERI_PCLK_GR_DIV_CMD_PA_TYPE_SEL_Msk;;
-  PERI_PCLK->GR[1].DIV_CMD |= PERI_PCLK_GR_DIV_CMD_ENABLE_Msk; // enable divider
-  PERI_PCLK->GR[1].CLOCK_CTL[PCLK_SCB3_CLOCK & 0xff] = 3 << PERI_PCLK_GR_CLOCK_CTL_TYPE_SEL_Pos;  // connect SCB3 to div_24_5_ctl[0]
-
-  // configure UART interface
-  uart->CTRL = ((ovs - 1) << SCB_CTRL_OVS_Pos) | (2 << SCB_CTRL_MODE_Pos);
-  uart->UART_CTRL = 0;
-  uart->UART_RX_CTRL = 1 << SCB_UART_RX_CTRL_STOP_BITS_Pos;
-  uart->RX_CTRL = 7 << SCB_RX_CTRL_DATA_WIDTH_Pos;
-  uart->UART_TX_CTRL = 1 << SCB_UART_TX_CTRL_STOP_BITS_Pos;
-  uart->TX_CTRL = 7 << SCB_TX_CTRL_DATA_WIDTH_Pos;
-  uart->TX_FIFO_CTRL = 1 << 16;
-  uart->TX_FIFO_CTRL = 0;
-  uart->CTRL |= 1 << SCB_CTRL_ENABLED_Pos;
-}
-
-static inline void uart_write_byte(volatile CySCB_Type *uart, uint8_t byte) {
-  (void) byte; (void) uart;
-  while((uart->INTR_TX & SCB_INTR_TX_EMPTY_Msk) == 0) spin(1);
-  uart->TX_FIFO_WR = byte;
-  uart->INTR_TX |= ~SCB_INTR_TX_EMPTY_Msk;
-}
-
-static inline void uart_write_buf(volatile CySCB_Type *uart, char *buf, size_t len) {
-	while (len-- > 0) uart_write_byte(uart, *(uint8_t *) buf++);
-}
-
-static inline void rng_init(void) {
-}
-static inline uint32_t rng_read(void) {
-   return 0;
-}
-
-static inline void ethernet_init(void) {
-  gpio_init(PIN(26, 0), GPIO_MODE_INPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH, 0, 27); // ETH1_REF_CLK
-  gpio_init(PIN(26, 1), GPIO_MODE_OUTPUT, GPIO_STRONG, GPIO_SPEED_HIGH, 0, 27); // ETH1_TX_CTL
-  gpio_init(PIN(26, 2), GPIO_MODE_OUTPUT, GPIO_STRONG, GPIO_SPEED_HIGH, 0, 27); // ETH1_TX_CLK
-  gpio_init(PIN(26, 3), GPIO_MODE_OUTPUT, GPIO_STRONG, GPIO_SPEED_HIGH, 0, 27); // ETH1_TXD_0
-  gpio_init(PIN(26, 4), GPIO_MODE_OUTPUT, GPIO_STRONG, GPIO_SPEED_HIGH, 0, 27); // ETH1_TXD_1
-  gpio_init(PIN(26, 5), GPIO_MODE_OUTPUT, GPIO_STRONG, GPIO_SPEED_HIGH, 0, 27); // ETH1_TXD_2
-  gpio_init(PIN(26, 6), GPIO_MODE_OUTPUT, GPIO_STRONG, GPIO_SPEED_HIGH, 0, 27); // ETH1_TXD_3
-  gpio_init(PIN(26, 7), GPIO_MODE_INPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH, 0, 27); // ETH1_RXD_0
-
-  gpio_init(PIN(27, 0), GPIO_MODE_INPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH, 0, 27); // ETH1_RXD_1
-  gpio_init(PIN(27, 1), GPIO_MODE_INPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH, 0, 27); // ETH1_RXD_2
-  gpio_init(PIN(27, 2), GPIO_MODE_INPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH, 0, 27); // ETH1_RXD_3
-  gpio_init(PIN(27, 3), GPIO_MODE_INPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH, 0, 27); // ETH1_RX_CTL
-  gpio_init(PIN(27, 4), GPIO_MODE_INPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH, 0, 27); // ETH1_RX_CLK
-  gpio_init(PIN(27, 5), GPIO_MODE_INPUT, GPIO_STRONG, GPIO_SPEED_LOW, 0, 27); // ETH1_MDIO
-  gpio_init(PIN(27, 6), GPIO_MODE_OUTPUT, GPIO_STRONG, GPIO_SPEED_LOW, 0, 27); // ETH1_MDC
-  //gpio_init(PIN(27, 7), GPIO_MODE_OUTPUT, GPIO_HIGHZ, GPIO_SPEED_HIGH, 0, 0); // ETH1_RST
-
-  CPUSS->CM7_0_SYSTEM_INT_CTL[eth_1_interrupt_eth_0_IRQn] = 0x80000003; // assign CPU interrupt #3
-  NVIC->ISER[0] = 1 << 3;
-
-  spin(10000000); // artificial delay to wait for PHY init
-}
-
-static inline void clock_init(void) {
-  SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2));  // Enable FPU
-  asm("DSB");
-  asm("ISB");
-  
-  // configure PLL
-  CLRSET(SRSS->CLK_PLL400M[0].CONFIG, CLK_PLL400M_CONFIG_BYPASS_SEL_Msk, BIT(29)); // First bypass PLL
-  spin(10);
-  SRSS->CLK_PLL400M[0].CONFIG &= ~CLK_PLL400M_CONFIG_ENABLE_Msk; // disable the PLL itself
-
-  // IMO source generates a frequency of 8MHz. The final frequency will be
-  // calculated as (CLK_IMO * feedback) / (reference * output_div)
-  CLRSET(SRSS->CLK_PLL400M[0].CONFIG, CLK_PLL400M_CONFIG_FEEDBACK_DIV_Msk, PLL_FEEDBACK << CLK_PLL400M_CONFIG_FEEDBACK_DIV_Pos);
-  CLRSET(SRSS->CLK_PLL400M[0].CONFIG, CLK_PLL400M_CONFIG_REFERENCE_DIV_Msk, PLL_REF << CLK_PLL400M_CONFIG_REFERENCE_DIV_Pos);
-  CLRSET(SRSS->CLK_PLL400M[0].CONFIG, CLK_PLL400M_CONFIG_OUTPUT_DIV_Msk, PLL_OUT << CLK_PLL400M_CONFIG_OUTPUT_DIV_Pos);
-  CLRSET(SRSS->CLK_PLL400M[0].CONFIG2, CLK_PLL400M_CONFIG2_FRAC_DIV_Msk, 0);
-  CLRSET(SRSS->CLK_PLL400M[0].CONFIG2, CLK_PLL400M_CONFIG2_FRAC_DITHER_EN_Msk, 0);
-  CLRSET(SRSS->CLK_PLL400M[0].CONFIG2, CLK_PLL400M_CONFIG2_FRAC_EN_Msk, 1 << CLK_PLL400M_CONFIG2_FRAC_EN_Pos);
-  CLRSET(SRSS->CLK_PLL400M[0].CONFIG, CLK_PLL400M_CONFIG_BYPASS_SEL_Msk, 0);
-  spin(10);
-  SRSS->CLK_PLL400M[0].CONFIG |= CLK_PLL400M_CONFIG_ENABLE_Msk; // enable the PLL
-  while (SRSS->CLK_PLL400M[0].CONFIG & 1) spin(1);
-
-  // configure PATH1 with source set to IMO
-  SRSS->CLK_PATH_SELECT[1] = 0;
-
-  // enable CLK_HFx
-  uint8_t clocks[] = {0, 1, 2, 3, 4, 5, 6};
-  for (size_t i = 0; i < sizeof(clocks) / sizeof(uint8_t); i++) {
-    CLRSET(SRSS->CLK_ROOT_SELECT[clocks[i]], SRSS_CLK_ROOT_SELECT_ROOT_MUX_Msk, 1); // choose PATH1
-    CLRSET(SRSS->CLK_ROOT_SELECT[clocks[i]], SRSS_CLK_ROOT_SELECT_DIRECT_MUX_Msk, 1 << SRSS_CLK_ROOT_SELECT_DIRECT_MUX_Pos);
-    if (clocks[i] != 0) // CLF_HF0 is already enabled
-      SRSS->CLK_ROOT_SELECT[clocks[i]] |= SRSS_CLK_ROOT_SELECT_ENABLE_Msk; // enable clock root
-  }
-
-  // set systick frequency
-  uint32_t tenms = SYS_FREQUENCY / 100 - 1; // number of cycles executed in 10ms
-  CPUSS->SYSTICK_CTL = tenms | (3 << CPUSS_SYSTICK_CTL_CLOCK_SOURCE_Pos); // select CLK_HF as source
-}

examples/infineon/infineon-xmc7200/link.ld

@@ -1,31 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(Reset_Handler)
-
-MEMORY
-{
-    flash(RX) : ORIGIN = 0x10080000, LENGTH = 0x80000
-    sram(!RX) : ORIGIN = 0x28000800, LENGTH = 510K
-}
-
-_estack     = ORIGIN(sram) + LENGTH(sram);
-
-SECTIONS
-{ 
-    .vectors  : { . = ALIGN(4); KEEP(*(.vectors)); . = ALIGN(4); } > flash
-    .text     : { *(.text*) } > flash
-    .rodata   : { *(.rodata*) } > flash
-
-    .data : {
-        _sdata = .;
-        *(.first_data)
-        *(.data SORT(.data.*))
-        _edata = .;
-    } > sram AT > flash
-    _sidata = LOADADDR(.data);
-
-    .bss : { _sbss = .; *(.bss SORT(.bss.*) COMMON) _ebss = .; } > sram
-
-    . = ALIGN(8);
-    _end = .;
-}

examples/infineon/infineon-xmc7200/main.c

@@ -1,32 +0,0 @@
-// Copyright (c) 2024 Cesanta Software Limited
-// All rights reserved
-
-#include "hal.h"
-#include "mongoose.h"
-#include "net.h"
-
-#define BLINK_PERIOD_MS 1000
-
-static void timer_fn(void *arg) {
-  gpio_toggle(LED1);  // Blink LED
-  (void) arg;         // Unused
-}
-
-int main(void) {
-  struct mg_mgr mgr;  // Mongoose event manager
-
-  hal_init();  // Cross-platform hardware init
-  
-  mg_mgr_init(&mgr);        // Initialise it
-  mg_log_set(MG_LL_DEBUG);  // Set log level to debug
-  mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mgr);
-
-  MG_INFO(("Initialising application..."));
-  web_init(&mgr);
-
-  for (;;) {
-    mg_mgr_poll(&mgr, 0);
-  }
-
-  return 0;
-}

examples/infineon/infineon-xmc7200/mongoose_config.h

@@ -1,26 +0,0 @@
-#pragma once
-
-// See https://mongoose.ws/documentation/#build-options
-#define MG_ARCH MG_ARCH_NEWLIB
-
-#define MG_ENABLE_TCPIP 1
-#define MG_ENABLE_DRIVER_XMC7 1
-#define MG_IO_SIZE 256
-#define MG_ENABLE_CUSTOM_MILLIS 1
-#define MG_ENABLE_CUSTOM_RANDOM 1
-#define MG_ENABLE_PACKED_FS 1
-
-// For static IP configuration, define MG_TCPIP_{IP,MASK,GW}
-// By default, those are set to zero, meaning that DHCP is used
-//
-// #define MG_TCPIP_IP MG_IPV4(192, 168, 1, 10)
-// #define MG_TCPIP_GW MG_IPV4(192, 168, 1, 1)
-// #define MG_TCPIP_MASK MG_IPV4(255, 255, 255, 0)
-
-// Set custom MAC address. By default, it is randomly generated
-// Using a build-time constant:
-// #define MG_SET_MAC_ADDRESS(mac) do { uint8_t buf_[6] = {2,3,4,5,6,7}; memmove(mac, buf_, sizeof(buf_)); } while (0)
-//
-// Using custom function:
-// extern void my_function(unsigned char *mac);
-// #define MG_SET_MAC_ADDRESS(mac) my_function(mac)

examples/infineon/infineon-xmc7200/startup.c

@@ -1,83 +0,0 @@
-#include "xmc7200d_e272k8384.h"
-
-void Reset_Handler(void);    // Defined below
-void Dummy_Handler(void);    // Defined below
-void SysTick_Handler(void);  // Defined in main.c
-void SystemInit(void);       // Defined in main.c, called by reset handler
-void _estack(void);          // Defined in link.ld
-
-#define WEAK_ALIAS __attribute__((weak, alias("Default_Handler")))
-
-WEAK_ALIAS void NMI_Handler(void);
-WEAK_ALIAS void HardFault_Handler(void);
-WEAK_ALIAS void SVCall_Handler(void);
-WEAK_ALIAS void PendSV_Handler(void);
-WEAK_ALIAS void SysTick_Handler(void);
-
-WEAK_ALIAS void Default_Intr_Handler(void);
-WEAK_ALIAS void CM0P_CpuIntr0_Handler(void);
-WEAK_ALIAS void CM0P_CpuIntr1_Handler(void);
-WEAK_ALIAS void CM0P_CpuIntr2_Handler(void);
-WEAK_ALIAS void CM0P_CpuIntr4_Handler(void);
-WEAK_ALIAS void CM0P_CpuIntr5_Handler(void);
-WEAK_ALIAS void CM0P_CpuIntr6_Handler(void);
-WEAK_ALIAS void CM0P_CpuIntr7_Handler(void);
-WEAK_ALIAS void ETH_IRQHandler(void);
-
-void CM0P_CpuIntr3_Handler(void) {
-	ETH_IRQHandler();
-}
-
-__attribute__((section(".vectors"))) void (*const tab[16 + 16])(void) = {
-	_estack,
-	Reset_Handler,
-	NMI_Handler,
-	HardFault_Handler,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	SVCall_Handler,
-	0,
-	0,
-	PendSV_Handler,
-	SysTick_Handler,
-	CM0P_CpuIntr0_Handler,
-	CM0P_CpuIntr1_Handler,
-	CM0P_CpuIntr2_Handler,
-	CM0P_CpuIntr3_Handler,
-	CM0P_CpuIntr4_Handler,
-	CM0P_CpuIntr5_Handler,
-	CM0P_CpuIntr6_Handler,
-	CM0P_CpuIntr7_Handler,
-	Default_Intr_Handler,
-	Default_Intr_Handler,
-	Default_Intr_Handler,
-	Default_Intr_Handler,
-	Default_Intr_Handler,
-	Default_Intr_Handler,
-	Default_Intr_Handler,
-	Default_Intr_Handler
-};
-
-__attribute__((naked, noreturn)) void Reset_Handler(void) {
-  // Clear BSS section, and copy data section from flash to RAM
-  extern long _sbss, _ebss, _sdata, _edata, _sidata;
-  for (long *src = &_sbss; src < &_ebss; src++) *src = 0;
-  for (long *src = &_sdata, *dst = &_sidata; src < &_edata;) *src++ = *dst++;
-
-  SCB->VTOR = (uint32_t) &tab;
-  SystemInit();
-
-  // Call main()
-  extern void main(void);
-  main();
-  for (;;) (void) 0;  // Infinite loop
-}
-
-void Default_Handler(void) {
-  for (;;) (void) 0;
-}

examples/microchip/same54-xpro/device-dashboard/Makefile

@@ -36,7 +36,7 @@ flash: firmware.bin
 cmsis_core:
 	git clone --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
 cmsis_sam:
-	curl -sL https://packs.download.microchip.com/Microchip.SAME54_DFP.3.8.234.pack -o $@.zip
+	curl -sL https://packs.download.microchip.com/Microchip.SAME54_DFP.3.9.244.atpack -o $@.zip
 	mkdir $@ && cd $@ && unzip ../$@.zip
 
 # Automated test via https://vcon.io/automated-firmware-tests/. Set VCON_API_KEY and update DEVICE_URL

examples/microchip/same54-xpro/device-dashboard/main.c

@@ -22,11 +22,12 @@ uint64_t mg_millis(void) {  // Let Mongoose use our uptime function
   return s_ticks;           // Return number of milliseconds since boot
 }
 
-void mg_random(void *buf, size_t len) {  // Use on-board RNG
+bool mg_random(void *buf, size_t len) {  // Use on-board RNG
   for (size_t n = 0; n < len; n += sizeof(uint32_t)) {
     uint32_t r = rng_read();
     memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r));
   }
+  return true;
 }
 
 static void timer_fn(void *arg) {

examples/microchip/same54-xpro/mqtt-client/Makefile

@@ -36,7 +36,7 @@ flash: firmware.bin
 cmsis_core:
 	git clone --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
 cmsis_sam:
-	curl -sL https://packs.download.microchip.com/Microchip.SAME54_DFP.3.8.234.pack -o $@.zip
+	curl -sL https://packs.download.microchip.com/Microchip.SAME54_DFP.3.9.244.atpack -o $@.zip
 	mkdir $@ && cd $@ && unzip ../$@.zip
 
 # Automated test via https://vcon.io/automated-firmware-tests/. Set VCON_API_KEY and update DEVICE_URL

examples/microchip/same54-xpro/mqtt-client/main.c

@@ -24,11 +24,12 @@ uint64_t mg_millis(void) {  // Let Mongoose use our uptime function
   return s_ticks;           // Return number of milliseconds since boot
 }
 
-void mg_random(void *buf, size_t len) {  // Use on-board RNG
+bool mg_random(void *buf, size_t len) {  // Use on-board RNG
   for (size_t n = 0; n < len; n += sizeof(uint32_t)) {
     uint32_t r = rng_read();
     memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r));
   }
+  return true;
 }
 
 static void fn(struct mg_connection *c, int ev, void *ev_data) {

examples/modbus-dashboard/net.c

@@ -22,7 +22,6 @@ static struct device_settings s_settings;
 static const char *s_json_header =
     "Content-Type: application/json\r\n"
     "Cache-Control: no-cache\r\n";
-static uint64_t s_boot_timestamp = 0;  // Updated by SNTP
 
 static void set_default_settings(struct device_settings *s) {
   s->magic = SETTINGS_MAGIC;
@@ -33,29 +32,9 @@ static void set_default_settings(struct device_settings *s) {
   mg_snprintf(s->mqtt_topic_rx, sizeof(s->mqtt_topic_rx), "%s", "modbus1/rx");
 }
 
-// This is for newlib and TLS (mbedTLS)
-uint64_t mg_now(void) {
-  return mg_millis() + s_boot_timestamp;
-}
-
-// SNTP connection event handler. When we get a response from an SNTP server,
-// adjust s_boot_timestamp. We'll get a valid time from that point on
-static void sfn(struct mg_connection *c, int ev, void *ev_data) {
-  uint64_t *expiration_time = (uint64_t *) c->data;
-  if (ev == MG_EV_OPEN) {
-    *expiration_time = mg_millis() + 3000;  // Store expiration time in 3s
-  } else if (ev == MG_EV_SNTP_TIME) {
-    uint64_t t = *(uint64_t *) ev_data;
-    s_boot_timestamp = t - mg_millis();
-    c->is_closing = 1;
-  } else if (ev == MG_EV_POLL) {
-    if (mg_millis() > *expiration_time) c->is_closing = 1;
-  }
-}
-
 // SNTP timer function. Sync up time
 static void timer_sntp_fn(void *param) {
-  mg_sntp_connect(param, "udp://time.google.com:123", sfn, NULL);
+  mg_sntp_connect(param, "udp://time.google.com:123", NULL, NULL);
 }
 
 static void setfromjson(struct mg_str json, const char *jsonpath, char *buf,
@@ -262,7 +241,6 @@ static void fn(struct mg_connection *c, int ev, void *ev_data) {
     } else if (mg_match(hm->uri, mg_str("/api/modbus/exec"), NULL)) {
       handle_modbus_exec(c, hm->body);
     } else if (mg_match(hm->uri, mg_str("/api/device/reset"), NULL)) {
-      mg_timer_add(c->mgr, 500, 0, (void (*)(void *)) mg_device_reset, NULL);
       mg_http_reply(c, 200, s_json_header, "true\n");
     } else {
       struct mg_http_serve_opts opts;

examples/mqtt-dashboard/dashboard/Makefile

@@ -1,14 +1,12 @@
-PWD := $(shell pwd)
-NPX ?= npx
-
-all: bundle.js main.css
-	make -C ../../../tutorials/http/http-server ARGS="-d $(PWD)"
+all:
+	make -C ../../../tutorials/http/http-server ARGS="-d $(CURDIR)"
 
 # Bundle JS libraries (preact, preact-router, ...) into a single file
 bundle.js:
 	curl -s https://npm.reversehttp.com/preact,preact/hooks,htm/preact,preact-router -o $@
 
 # Create optimised CSS. Prerequisite: npm -g i tailwindcss tailwindcss-font-inter
+NPX ?= npx
 main.css: index.html $(wildcard *.js)
 	$(NPX) tailwindcss -o $@ --minify
 

examples/mqtt-dashboard/device/net.c

@@ -20,11 +20,6 @@ struct device_config {
 };
 
 static struct device_config s_device_config;
-static uint64_t s_boot_timestamp = 0;  // Updated by SNTP
-
-uint64_t mg_now(void) {
-  return mg_millis() + s_boot_timestamp;
-}
 
 // Device ID generation function. Create an ID that is unique
 // for a given device, and does not change between device restarts.
@@ -58,15 +53,6 @@ static void set_device_id(void) {
   g_device_id = strdup(buf);
 }
 
-static size_t print_fw_status(void (*out)(char, void *), void *ptr,
-                              va_list *ap) {
-  int fw = va_arg(*ap, int);
-  return mg_xprintf(out, ptr, "{%m:%d,%m:%c%lx%c,%m:%u,%m:%u}",
-                    MG_ESC("status"), mg_ota_status(fw), MG_ESC("crc32"), '"',
-                    mg_ota_crc32(fw), '"', MG_ESC("size"), mg_ota_size(fw),
-                    MG_ESC("timestamp"), mg_ota_timestamp(fw));
-}
-
 static size_t print_shorts(void (*out)(char, void *), void *ptr, va_list *ap) {
   uint16_t *array = va_arg(*ap, uint16_t *);
   int i, len = 0, num_elems = va_arg(*ap, int);
@@ -92,7 +78,7 @@ static void publish_status(struct mg_connection *c) {
 
   // Print JSON notification into the io buffer
   mg_xprintf(mg_pfn_iobuf, &io,
-             "{%m:%m,%m:{%m:%m,%m:%d,%m:%d,%m:[%M],%m:[%M],%m:%M,%m:%M}}",  //
+             "{%m:%m,%m:{%m:%m,%m:%d,%m:%d,%m:[%M],%m:[%M]}}",  //
              MG_ESC("method"), MG_ESC("status.notify"), MG_ESC("params"),   //
              MG_ESC("status"), MG_ESC("online"),                            //
              MG_ESC(("log_level")), s_device_config.log_level,              //
@@ -100,9 +86,7 @@ static void publish_status(struct mg_connection *c) {
              MG_ESC(("pin_map")), print_shorts, s_device_config.pin_map,
              s_device_config.pin_count,  //
              MG_ESC(("pin_state")), print_bools, s_device_config.pin_state,
-             s_device_config.pin_count,                                  //
-             MG_ESC(("crnt_fw")), print_fw_status, MG_FIRMWARE_CURRENT,  //
-             MG_ESC(("prev_fw")), print_fw_status, MG_FIRMWARE_PREVIOUS);
+             s_device_config.pin_count);
 
   memset(&pub_opts, 0, sizeof(pub_opts));
   mg_snprintf(topic, sizeof(topic), "%s/%s/status", g_root_topic, g_device_id);
@@ -165,27 +149,6 @@ static void rpc_config_set(struct mg_rpc_req *r) {
   }
 }
 
-static void rpc_ota_commit(struct mg_rpc_req *r) {
-  if (mg_ota_commit()) {
-    mg_rpc_ok(r, "%m", MG_ESC("ok"));
-  } else {
-    mg_rpc_err(r, 1, "Failed to commit the firmware");
-  }
-}
-
-static void rpc_device_reset(struct mg_rpc_req *r) {
-  mg_rpc_ok(r, "%m", MG_ESC("ok"));
-  mg_timer_add(s_conn->mgr, 500, 0, (void (*)(void *)) mg_device_reset, NULL);
-}
-
-static void rpc_ota_rollback(struct mg_rpc_req *r) {
-  if (mg_ota_rollback()) {
-    mg_rpc_ok(r, "%m", MG_ESC("ok"));
-  } else {
-    mg_rpc_err(r, 1, "Failed to rollback to the previous firmware");
-  }
-}
-
 static void rpc_ota_upload(struct mg_rpc_req *r) {
   long ofs = mg_json_get_long(r->frame, "$.params.offset", -1);
   long tot = mg_json_get_long(r->frame, "$.params.total", -1);
@@ -205,10 +168,6 @@ static void rpc_ota_upload(struct mg_rpc_req *r) {
       mg_rpc_err(r, 1, "mg_ota_end() failed\n", tot);
     } else {
       mg_rpc_ok(r, "%m", MG_ESC("ok"));
-      if (len == 0) {  // Successful mg_ota_end() called, schedule device reboot
-        mg_timer_add(s_conn->mgr, 500, 0, (void (*)(void *)) mg_device_reset,
-                     NULL);
-      }
     }
     free(buf);
   }
@@ -277,26 +236,11 @@ static void timer_ping(void *arg) {
   (void) arg;
 }
 
-// SNTP connection event handler. When we get a response from an SNTP server,
-// adjust s_boot_timestamp. We'll get a valid time from that point on
-static void sntp_ev_handler(struct mg_connection *c, int ev, void *ev_data) {
-  uint64_t *expiration_time = (uint64_t *) c->data;
-  if (ev == MG_EV_OPEN) {
-    *expiration_time = mg_millis() + 3000;  // Store expiration time in 3s
-  } else if (ev == MG_EV_SNTP_TIME) {
-    uint64_t t = *(uint64_t *) ev_data;
-    s_boot_timestamp = t - mg_millis();
-    c->is_closing = 1;
-  } else if (ev == MG_EV_POLL) {
-    if (mg_millis() > *expiration_time) c->is_closing = 1;
-  }
-}
-
 static void timer_sntp(void *param) {  // SNTP timer function. Sync up time
   static uint64_t hourly_timer = 0;
-  if (s_boot_timestamp == 0 ||
-      mg_timer_expired(&hourly_timer, 3600000, mg_millis())) {
-    mg_sntp_connect(param, "udp://time.google.com:123", sntp_ev_handler, NULL);
+  uint64_t t1 = mg_now(), t2 = mg_millis();
+  if (t1 < t2 + 3600 || mg_timer_expired(&hourly_timer, 3600000, t2)) {
+    mg_sntp_connect(param, "udp://time.google.com:123", NULL, NULL);
   }
 }
 
@@ -317,11 +261,8 @@ void web_init(struct mg_mgr *mgr) {
 
   // Configure JSON-RPC functions we're going to handle
   mg_rpc_add(&s_rpc, mg_str("config.set"), rpc_config_set, NULL);
-  mg_rpc_add(&s_rpc, mg_str("ota.commit"), rpc_ota_commit, NULL);
-  mg_rpc_add(&s_rpc, mg_str("ota.rollback"), rpc_ota_rollback, NULL);
   mg_rpc_add(&s_rpc, mg_str("ota.upload"), rpc_ota_upload, NULL);
-  mg_rpc_add(&s_rpc, mg_str("device.reset"), rpc_device_reset, NULL);
-
+  
   mg_timer_add(mgr, 3000, MG_TIMER_REPEAT | MG_TIMER_RUN_NOW, timer_reconnect,
                mgr);
   mg_timer_add(mgr, ping_interval_ms, MG_TIMER_REPEAT, timer_ping, mgr);

examples/nxp/frdm-mcxn947-make-baremetal-builtin/Makefile

@@ -0,0 +1,29 @@
+BOARD = mcxn947
+IDE = GCC+make
+RTOS = baremetal
+WIZARD_URL ?= http://mongoose.ws/wizard
+
+all build example: firmware.bin
+
+firmware.bin: wizard
+	make -C wizard CFLAGS_EXTRA=$(CFLAGS_EXTRA) && mv wizard/firmware.bin ./
+
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard ; rm mongoose.[ch] ; ln -s ../../../../mongoose.c ; ln -s ../../../../mongoose.h
+
+
+# Automated remote test. Requires env variable VCON_API_KEY set. See https://vcon.io/automated-firmware-tests/
+DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/??
+update: firmware.bin
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
+
+test update: CFLAGS_EXTRA ="-DUART_DEBUG=USART?"
+test: update
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=15 | tee /tmp/output.txt
+	grep 'READY, IP:' /tmp/output.txt       # Check for network init
+
+clean:
+	rm -rf firmware.* wizard*

examples/nxp/frdm-mcxn947-make-baremetal-builtin/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=mcxn947&ide=GCC+make&rtos=baremetal&file=README.md)

examples/nxp/frdm-mcxn947-make-freertos-builtin/Makefile

@@ -0,0 +1,29 @@
+BOARD = mcxn947
+IDE = GCC+make
+RTOS = FreeRTOS
+WIZARD_URL ?= http://mongoose.ws/wizard
+
+all build example: firmware.bin
+
+firmware.bin: wizard
+	make -C wizard CFLAGS_EXTRA=$(CFLAGS_EXTRA) && mv wizard/firmware.bin ./
+
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard ; rm mongoose.[ch] ; ln -s ../../../../mongoose.c ; ln -s ../../../../mongoose.h
+
+
+# Automated remote test. Requires env variable VCON_API_KEY set. See https://vcon.io/automated-firmware-tests/
+DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/??
+update: firmware.bin
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
+
+test update: CFLAGS_EXTRA ="-DUART_DEBUG=USART?"
+test: update
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=15 | tee /tmp/output.txt
+	grep 'READY, IP:' /tmp/output.txt       # Check for network init
+
+clean:
+	rm -rf firmware.* wizard*

examples/nxp/frdm-mcxn947-make-freertos-builtin/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=mcxn947&ide=GCC+make&rtos=FreeRTOS&file=README.md)

examples/nxp/frdm-mcxn947-xpresso-baremetal-builtin/Makefile

@@ -0,0 +1,27 @@
+BOARD = mcxn947
+IDE = MCUXpresso
+RTOS = baremetal
+WIZARD_URL ?= http://mongoose.ws/wizard
+
+TARGET ?= Debug
+DOCKER = docker run --rm -v $(CURDIR):/root -w /root
+IMAGE ?= scaprile/xpresso
+HEADLESS_BUILD = /usr/local/mcuxpressoide/ide/mcuxpressoide --launcher.suppressErrors -nosplash -application org.eclipse.cdt.managedbuilder.core.headlessbuild
+
+all build example: firmware.axf
+
+firmware.axf: wizard
+	mkdir -p workspace
+	PROJNAME=`xq -r .projectDescription.name wizard/.project` && \
+	($(DOCKER) $(IMAGE) $(HEADLESS_BUILD) -data workspace -import wizard -cleanBuild $$PROJNAME/$(TARGET) || true) && \
+	cp wizard/$(TARGET)/$$PROJNAME.axf firmware.axf
+
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard/source ; rm mongoose.[ch] ; cp -rL ../../../../../mongoose.[ch] .
+
+
+clean:
+	sudo rm -rf firmware.* wizard* workspace mcuxpresso .cache .eclipse .p2

examples/nxp/frdm-mcxn947-xpresso-baremetal-builtin/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=f429&ide=CubeIDE&rtos=baremetal&file=README.md)

examples/nxp/frdm-mcxn947-xpresso-freertos-builtin/Makefile

@@ -0,0 +1,28 @@
+BOARD = mcxn947
+IDE = MCUXpresso
+RTOS = FreeRTOS
+WIZARD_URL ?= http://mongoose.ws/wizard
+
+TARGET ?= Debug
+DOCKER = docker run --rm -v $(CURDIR):/root -w /root
+IMAGE ?= scaprile/xpresso
+HEADLESS_BUILD = /usr/local/mcuxpressoide/ide/mcuxpressoide --launcher.suppressErrors -nosplash -application org.eclipse.cdt.managedbuilder.core.headlessbuild
+
+all build example: firmware.axf
+
+firmware.axf: wizard
+	mkdir -p workspace
+	PROJNAME=`xq -r .projectDescription.name wizard/.project` && \
+	($(DOCKER) $(IMAGE) $(HEADLESS_BUILD) -data workspace -import wizard -cleanBuild $$PROJNAME/$(TARGET) || true) && \
+	cp wizard/$(TARGET)/$$PROJNAME.axf firmware.axf
+
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard/source ; rm mongoose.[ch] ; cp -rL ../../../../../mongoose.[ch] .
+
+
+clean:
+	sudo rm -rf firmware.* wizard* workspace mcuxpresso .cache .eclipse .p2
+

examples/nxp/frdm-mcxn947-xpresso-freertos-builtin/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=f429&ide=CubeIDE&rtos=baremetal&file=README.md)

examples/nxp/rt1020-evk-make-baremetal-builtin/Makefile

@@ -1,85 +1,29 @@
-CFLAGS  = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion
-CFLAGS += -Wformat-truncation -fno-common # -Wconversion is not SDK-friendly
-CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
-CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_mcu/devices/MIMXRT1021
-CFLAGS += -Icmsis_mcu/devices/MIMXRT1021/drivers -DCPU_MIMXRT1021DAG5A 
-CFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA)
-LDSCRIPT = link.ld
-LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map 
+BOARD = rt1020
+IDE = GCC+make
+RTOS = baremetal
+WIZARD_URL ?= http://mongoose.ws/wizard
 
-SOURCES = main.c syscalls.c sysinit.c
-SOURCES += cmsis_mcu/devices/MIMXRT1021/gcc/startup_MIMXRT1021.S # NXP startup file. Compiler-dependent!
-CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS	# Make startup code work as expected
-
-# Mongoose options are defined in mongoose_config.h
-SOURCES += mongoose.c net.c packed_fs.c
-
-# Example specific build options. See README.md
-CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\" -DHTTPS_URL=\"https://0.0.0.0/\"
-
-ifeq ($(OS),Windows_NT)
-  RM = cmd /C del /Q /F /S
-else
-  RM = rm -rf
-endif
-
-all build example update: SOURCES += flash_image.c
 all build example: firmware.bin
 
-ram: LDSCRIPT = link_ram.ld
-ram: firmware.bin
+firmware.bin: wizard
+	make -C wizard CFLAGS_EXTRA=$(CFLAGS_EXTRA) && mv wizard/firmware.bin ./
 
-firmware.bin: firmware.elf
-	arm-none-eabi-objcopy -O binary $< $@
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard ; rm mongoose.[ch] ; ln -s ../../../../mongoose.c ; ln -s ../../../../mongoose.h
 
-firmware.elf: cmsis_core cmsis_mcu $(SOURCES) hal.h link_ram.ld link.ld Makefile
-	arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@
-	arm-none-eabi-size $@
-
-flash: firmware.bin
-# flash
-
-cmsis_core:     # ARM CMSIS core headers
-	git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
-cmsis_mcu:
-	curl -sL https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.MIMXRT1021_DFP.17.0.0.pack -o $@.zip
-	mkdir $@ && cd $@ && unzip -q ../$@.zip
-mbedtls:        # mbedTLS library
-	git clone --depth 1 -b v2.28.2 https://github.com/mbed-tls/mbedtls $@
-
-ifeq ($(TLS), mbedtls)
-CFLAGS += -DMG_TLS=MG_TLS_MBED -Wno-conversion -Imbedtls/include
-CFLAGS += -DMBEDTLS_CONFIG_FILE=\"mbedtls_config.h\" mbedtls/library/*.c
-firmware.elf: mbedtls
-endif
 
 # Automated remote test. Requires env variable VCON_API_KEY set. See https://vcon.io/automated-firmware-tests/
 DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/4
 update: firmware.bin
 	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
 
-update updateram: CFLAGS += -DUART_DEBUG=LPUART2
-
+test update: CFLAGS_EXTRA ="-DUART_DEBUG=LPUART2"
 test: update
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=15 | tee /tmp/output.txt
 	grep 'READY, IP:' /tmp/output.txt       # Check for network init
 
-
-updateram: ram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @firmware.bin
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0003 wm,e000edfc,1 wm,e000ed0c,5fa0004"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	PC=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,4"}' | jq -r .resp[5:]` && \
-	SP=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,0"}' | jq -r .resp[5:]` && \
-	REQ="wm,e000ed08,0 wr,d,$$SP wr,f,$$PC" && \
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"'"$$REQ"'"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0001"}'
-
-testram: updateram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
-	grep 'READY, IP:' /tmp/output.txt       # Check for network init
-
-
 clean:
-	$(RM) firmware.* *.su cmsis_core cmsis_mcu mbedtls *.zip
+	rm -rf firmware.* wizard*

examples/nxp/rt1020-evk-make-baremetal-builtin/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=rt1020&ide=GCC+make&rtos=baremetal&file=README.md)

examples/nxp/rt1020-evk-make-baremetal-builtin/dcd.h

@@ -1,91 +0,0 @@
-/*
- * Copyright 2020-2021 NXP
- * All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#define __DCD_DATA                                                            \
-  0xD2, 0x03, 0xE0, 0x41, 0xCC, 0x03, 0x5C, 0x04, 0x40, 0x0F, 0xC0, 0x68,     \
-      0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0F, 0xC0, 0x6C, 0xFF, 0xFF, 0xFF, 0xFF, \
-      0x40, 0x0F, 0xC0, 0x70, 0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0F, 0xC0, 0x74, \
-      0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0F, 0xC0, 0x78, 0xFF, 0xFF, 0xFF, 0xFF, \
-      0x40, 0x0F, 0xC0, 0x7C, 0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0F, 0xC0, 0x80, \
-      0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0D, 0x80, 0x30, 0x00, 0x00, 0x20, 0x01, \
-      0x40, 0x0D, 0x81, 0x00, 0x10, 0x18, 0x10, 0x1B, 0x40, 0x0F, 0xC0, 0x14, \
-      0x00, 0x0A, 0x83, 0x40, 0x40, 0x1F, 0x80, 0x14, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x18, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x1C, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x20, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x24, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x28, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x2C, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x30, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x34, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x38, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x40, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x44, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x48, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x4C, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x50, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x54, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x58, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x5C, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x64, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x68, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x70, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x74, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x78, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x7C, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x84, 0x00, 0x00, 0x00, 0x10, 0x40, 0x1F, 0x80, 0x88, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x8C, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x90, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x94, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x98, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x9C, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0xA0, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0xA4, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0xA8, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0xAC, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0xB0, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x81, 0x88, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0x8C, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0x90, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x81, 0x94, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0x98, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0x9C, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x81, 0xA0, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xA4, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xA8, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x81, 0xAC, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xB0, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xB4, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x81, 0xB8, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xBC, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xC0, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x81, 0xC4, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xC8, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xCC, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x81, 0xD0, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xD4, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xD8, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x81, 0xDC, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xE0, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xE4, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x81, 0xE8, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xEC, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xF0, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x81, 0xF4, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xF8, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x81, 0xFC, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x82, 0x00, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x82, 0x04, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x82, 0x08, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x82, 0x0C, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x82, 0x10, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x82, 0x14, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x82, 0x18, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x82, 0x1C, \
-      0x00, 0x00, 0x00, 0xE1, 0x40, 0x1F, 0x82, 0x20, 0x00, 0x00, 0x00, 0xE1, \
-      0x40, 0x1F, 0x82, 0x24, 0x00, 0x00, 0x00, 0xE1, 0x40, 0x2F, 0x00, 0x00, \
-      0x10, 0x00, 0x00, 0x04, 0x40, 0x2F, 0x00, 0x08, 0x00, 0x00, 0x00, 0x81, \
-      0x40, 0x2F, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x81, 0x40, 0x2F, 0x00, 0x10, \
-      0x80, 0x00, 0x00, 0x1B, 0x40, 0x2F, 0x00, 0x14, 0x82, 0x00, 0x00, 0x1B, \
-      0x40, 0x2F, 0x00, 0x18, 0x84, 0x00, 0x00, 0x1B, 0x40, 0x2F, 0x00, 0x04, \
-      0x00, 0x00, 0x79, 0x88, 0x40, 0x2F, 0x00, 0x40, 0x00, 0x00, 0x0F, 0x07, \
-      0x40, 0x2F, 0x00, 0x44, 0x00, 0x65, 0x29, 0x22, 0x40, 0x2F, 0x00, 0x48, \
-      0x00, 0x01, 0x09, 0x20, 0x40, 0x2F, 0x00, 0x4C, 0x50, 0x21, 0x0A, 0x08, \
-      0x40, 0x2F, 0x00, 0x80, 0x00, 0x00, 0x00, 0x21, 0x40, 0x2F, 0x00, 0x84, \
-      0x00, 0x88, 0x88, 0x88, 0x40, 0x2F, 0x00, 0x94, 0x00, 0x00, 0x00, 0x02, \
-      0x40, 0x2F, 0x00, 0x98, 0x00, 0x00, 0x00, 0x00, 0x40, 0x2F, 0x00, 0x90, \
-      0x80, 0x00, 0x00, 0x00, 0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0F, \
-      0xCF, 0x00, 0x0C, 0x1C, 0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, \
-      0xCC, 0x00, 0x14, 0x04, 0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00, \
-      0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0C, 0xCF, 0x00, 0x0C, 0x1C, \
-      0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, 0xCC, 0x00, 0x14, 0x04, \
-      0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00, 0x40, 0x2F, 0x00, 0x9C, \
-      0xA5, 0x5A, 0x00, 0x0C, 0xCF, 0x00, 0x0C, 0x1C, 0x40, 0x2F, 0x00, 0x3C, \
-      0x00, 0x00, 0x00, 0x01, 0xCC, 0x00, 0x1C, 0x04, 0x40, 0x2F, 0x00, 0xA0, \
-      0x00, 0x00, 0x00, 0x30, 0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00, \
-      0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0A, 0xCF, 0x00, 0x0C, 0x1C, \
-      0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, 0xCC, 0x00, 0x0C, 0x04, \
-      0x40, 0x2F, 0x00, 0x4C, 0x50, 0x21, 0x0A, 0x09

examples/nxp/rt1020-evk-make-baremetal-builtin/flash_image.c

@@ -1,61 +0,0 @@
-#include "dcd.h"          // pin settings for MIMXRT1020-EVK board
-#include "fsl_flexspi.h"  // peripheral structures
-#include "fsl_romapi.h"   // peripheral structures
-#include "hal.h"
-
-extern uint32_t __isr_vector[];
-
-// RM 9.7.2
-__attribute__((section(".dcd"), used))
-const uint8_t __ivt_dcd_data[] = {__DCD_DATA};
-
-// RM 9.7.1
-__attribute__((section(".dat"), used)) const uint32_t __ivt_boot_data[] = {
-    FlexSPI_AMBA_BASE,  // boot start location
-    8 * 1024 * 1024,    // size
-    0,                  // Plugin flag
-    0Xffffffff          // empty - extra data word
-};
-
-__attribute__((section(".ivt"), used)) const uint32_t __ivt[8] = {
-    0x412000d1,                  // header: 41 - version, 2000 size, d1 tag
-    (uint32_t) __isr_vector,     // entry
-    0,                           // reserved
-    (uint32_t) __ivt_dcd_data,   // dcd
-    (uint32_t) __ivt_boot_data,  // boot data
-    (uint32_t) __ivt,            // this is us - ivt absolute address
-    0,                           // csf absolute address
-    0,                           // reserved for HAB
-};
-
-#define __FLEXSPI_QSPI_LUT { \
-                    [0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), \
-                    [1] = FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),\
-                    [4 * 1 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x04),\
-                    [4 * 3 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0x0),\
-                    [4 * 5 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 0x18),\
-                    [4 * 8 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8, RADDR_SDR, FLEXSPI_1PAD, 0x18),\
-                    [4 * 9 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 0x18),\
-                    [4 * 9 + 1] = FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0),\
-                    [4 * 11 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0x0),\
-}
-
-// MIMXRT1060-EVKB flash chip config: S25LP064A-JBLE
-__attribute__((section(".cfg"), used))
-const flexspi_nor_config_t __qspi_flash_cfg = {
-    .memConfig = {.tag = FLEXSPI_CFG_BLK_TAG,
-                  .version = FLEXSPI_CFG_BLK_VERSION,
-                  .readSampleClkSrc = 1,  // ReadSampleClk_LoopbackFromDqsPad
-                  .csHoldTime = 3,
-                  .csSetupTime = 3,
-                  .controllerMiscOption = BIT(4),
-                  .deviceType = 1,  // serial NOR
-                  .sflashPadType = 4,
-                  .serialClkFreq = 7,  // 133MHz
-                  .sflashA1Size = 8 * 1024 * 1024,
-                  .lookupTable = __FLEXSPI_QSPI_LUT},
-    .pageSize = 256,
-    .sectorSize = 4 * 1024,
-    .ipcmdSerialClkFreq = 1,
-    .blockSize = 64 * 1024,
-    .isUniformBlockSize = false};

examples/nxp/rt1020-evk-make-baremetal-builtin/hal.h

@@ -1,337 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-// https://www.nxp.com/webapp/Download?colCode=IMXRT1020RM
-// https://cache.nxp.com/secured/assets/documents/en/user-guide/MIMXRT1020EVKHUG.pdf
-
-#pragma once
-
-#include "MIMXRT1021.h"
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <string.h>
-
-#define BIT(x) (1UL << (x))
-#define SETBITS(R, CLEARMASK, SETMASK) (R) = ((R) & ~(CLEARMASK)) | (SETMASK)
-#define PIN(bank, num) ((((bank) - '0') << 8) | (num))
-#define PINNO(pin) (pin & 255)
-#define PINBANK(pin) (pin >> 8)
-
-// Use LED for blinking, GPIO_AD_B0_05. GPIO1.5 (schematics)
-#define LED PIN('1', 5)
-
-#ifndef UART_DEBUG
-#define UART_DEBUG LPUART1
-#endif
-
-// No settable constants, see sysinit.c
-#define SYS_FREQUENCY 500000000UL
-
-static inline void spin(volatile uint32_t count) {
-  while (count--) (void) 0;
-}
-
-enum { CLOCK_OFF = 0U, CLOCK_ON_RUN = 1U, CLOCK_ON_RUN_WAIT = 3U };
-static inline void clock_periph(uint32_t index, uint32_t shift, uint32_t val) {
-  volatile uint32_t *r = &CCM->CCGR0;
-  SETBITS(r[index], 3UL << shift, val << shift);
-}
-
-// which peripheral feeds the pin
-static inline void gpio_mux_config(uint16_t index, uint8_t af) {
-  IOMUXC->SW_MUX_CTL_PAD[index] = af;
-}
-
-// which pin feeds the peripheral (2nd stage)
-static inline void periph_mux_config(uint16_t index, uint8_t in) {
-  IOMUXC->SELECT_INPUT[index] = in;
-}
-
-enum { GPIO_MODE_INPUT, GPIO_MODE_OUTPUT };
-enum { GPIO_OTYPE_PUSH_PULL, GPIO_OTYPE_OPEN_DRAIN };
-enum { GPIO_SPEED_LOW, GPIO_SPEED_MEDIUM, GPIO_SPEED_MEDIUM_, GPIO_SPEED_HIGH };
-enum { GPIO_PULL_NONE, GPIO_PULL_DOWN, GPIO_PULL_UP };
-static inline GPIO_Type *gpio_bank(uint16_t pin) {
-  static const GPIO_Type *g[] = {NULL, GPIO1, GPIO2, GPIO3, NULL, GPIO5};
-  return (GPIO_Type *) g[PINBANK(pin)];
-}
-
-// pin driver/pull-up/down configuration (ignore "keeper")
-static inline void gpio_pad_config(uint16_t index, uint8_t type, uint8_t speed,
-                                   uint8_t pull) {
-  bool dopull = pull > 0;
-  if (dopull) --pull;
-  IOMUXC->SW_PAD_CTL_PAD[index] =
-      IOMUXC_SW_PAD_CTL_PAD_SPEED(speed) | IOMUXC_SW_PAD_CTL_PAD_ODE(type) |
-      IOMUXC_SW_PAD_CTL_PAD_SRE(speed >= GPIO_SPEED_HIGH) |
-      IOMUXC_SW_PAD_CTL_PAD_PUE(1) | IOMUXC_SW_PAD_CTL_PAD_PKE(dopull) |
-      IOMUXC_SW_PAD_CTL_PAD_PUS(pull) | IOMUXC_SW_PAD_CTL_PAD_DSE(7);
-}
-
-static inline void gpio_init(uint16_t pin, uint8_t mode, uint8_t type,
-                             uint8_t speed, uint8_t pull) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint8_t bit = (uint8_t) PINNO(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  switch (PINBANK(pin)) {
-    case 1:
-      gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_00 + bit, 5);
-      gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_00 + bit, type, speed,
-                      pull);
-      clock_periph(1, CCM_CCGR1_CG13_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 2:
-      gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_00 + bit, 5);
-      gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_00 + bit, type, speed,
-                      pull);
-      clock_periph(0, CCM_CCGR0_CG15_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 3:
-      gpio_mux_config(bit < 13
-                          ? kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32 + bit
-                          : kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00 + bit - 13,
-                      5);
-      gpio_pad_config(bit < 13
-                          ? kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_32 + bit
-                          : kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B0_00 + bit - 13,
-                      type, speed, pull);
-      clock_periph(2, CCM_CCGR2_CG13_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 5:
-      // TODO(): support sw_mux
-      clock_periph(1, CCM_CCGR1_CG15_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    default:
-      break;
-  }
-
-  gpio->IMR &= ~mask;
-  if (mode == GPIO_MODE_INPUT) {
-    gpio->GDIR &= ~mask;
-  } else {
-    gpio->GDIR |= mask;
-  }
-}
-static inline void gpio_input(uint16_t pin) {
-  gpio_init(pin, GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_NONE);
-}
-static inline void gpio_output(uint16_t pin) {
-  gpio_init(pin, GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_NONE);
-}
-
-static inline bool gpio_read(uint16_t pin) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-  return gpio->DR & mask;
-}
-static inline void gpio_write(uint16_t pin, bool value) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-  if (value) {
-    gpio->DR |= mask;
-  } else {
-    gpio->DR &= ~mask;
-  }
-}
-static inline void gpio_toggle(uint16_t pin) {
-  gpio_write(pin, !gpio_read(pin));
-}
-
-// 14.5 Table 14-4: uart_clk_root
-// see sysinit.c for clocks, (14.7.9: defaults to PLL3/6/1 = 80MHz)
-static inline void uart_init(LPUART_Type *uart, unsigned long baud) {
-  uint8_t af = 2;                           // Alternate function
-  uint16_t mr = 0, pr = 0, mt = 0, pt = 0;  // pins
-  uint32_t freq = 80000000;                 // uart_clk_root frequency
-  if (uart == LPUART1)
-    mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_06,
-    pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_06,
-    mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_07,
-    pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_07;
-  if (uart == LPUART2)
-    mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08,
-    pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_08,
-    mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09,
-    pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_09;
-
-  if (uart == LPUART1) clock_periph(5, CCM_CCGR5_CG12_SHIFT, CLOCK_ON_RUN_WAIT);
-  if (uart == LPUART2) clock_periph(0, CCM_CCGR0_CG14_SHIFT, CLOCK_ON_RUN_WAIT);
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  gpio_mux_config(mt, af);
-  gpio_pad_config(pt, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-  gpio_mux_config(mr, af);
-  gpio_pad_config(pr, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-
-  uart->GLOBAL |= LPUART_GLOBAL_RST_MASK;  // reset, CTRL = 0, defaults
-  uart->GLOBAL &= ~LPUART_GLOBAL_RST_MASK;
-  SETBITS(uart->BAUD,
-          LPUART_BAUD_OSR_MASK | LPUART_BAUD_SBR_MASK | LPUART_BAUD_SBNS_MASK,
-          LPUART_BAUD_OSR(16 - 1) |
-              LPUART_BAUD_SBR(freq / (16 * baud)));  // Rx sample at 16x
-  SETBITS(uart->CTRL,
-          LPUART_CTRL_PE_MASK | LPUART_CTRL_M_MASK | LPUART_CTRL_ILT_MASK |
-              LPUART_CTRL_IDLECFG_MASK,
-          LPUART_CTRL_IDLECFG(1) | LPUART_CTRL_ILT(1) |
-              LPUART_BAUD_SBNS(0));  // no parity, idle 2 chars after 1 stop bit
-  uart->CTRL |= LPUART_CTRL_TE_MASK | LPUART_CTRL_RE_MASK;
-}
-
-static inline void uart_write_byte(LPUART_Type *uart, uint8_t byte) {
-  uart->DATA = byte;
-  while ((uart->STAT & LPUART_STAT_TDRE_MASK) == 0) spin(1);
-}
-static inline void uart_write_buf(LPUART_Type *uart, char *buf, size_t len) {
-  while (len-- > 0) uart_write_byte(uart, *(uint8_t *) buf++);
-}
-static inline int uart_read_ready(LPUART_Type *uart) {
-  (void) uart;
-  return uart->STAT & LPUART_STAT_RDRF_MASK;
-}
-static inline uint8_t uart_read_byte(LPUART_Type *uart) {
-  return (uint8_t) (uart->DATA & 255);
-}
-
-static inline void rng_init(void) {
-  clock_periph(6, CCM_CCGR6_CG6_SHIFT, CLOCK_ON_RUN_WAIT);  // trng_clk
-  SETBITS(TRNG->MCTL,
-          TRNG_MCTL_PRGM_MASK | TRNG_MCTL_ERR_MASK | TRNG_MCTL_RST_DEF_MASK,
-          TRNG_MCTL_PRGM(1) | TRNG_MCTL_ERR(1) |
-              TRNG_MCTL_RST_DEF(1));  // reset to default values
-  SETBITS(TRNG->MCTL, TRNG_MCTL_PRGM_MASK | TRNG_MCTL_ERR_MASK,
-          TRNG_MCTL_PRGM(0));            // set to run mode
-  (void) TRNG->ENT[TRNG_ENT_COUNT - 1];  // start new entropy generation
-  (void) TRNG->ENT[0];                   // defect workaround
-}
-static inline uint32_t rng_read(void) {
-  static uint8_t idx = 0;
-  while ((TRNG->MCTL & TRNG_MCTL_ENT_VAL_MASK) == 0) (void) 0;
-  uint32_t data = TRNG->ENT[idx++];  // read data
-  idx %= TRNG_ENT_COUNT;             // stay within array limits
-  if (idx == 0)                      // we've just read TRNG_ENT_COUNT - 1
-    (void) TRNG->ENT[0];             // defect workaround
-  return data;
-}
-
-// - PHY has no xtal, XI driven from ENET_REF_CLK1 (labeled as ENET_TX_CLK
-// (GPIO_AD_B0_08)), generated by the MCU
-// - PHY RST connected to GPIO1.4 (GPIO_AD_B0_04); INTRP/NAND_TREE connected to
-// GPIO1.22 (GPIO_AD_B1_06)
-// - 37.4 REF_CLK1 is RMII mode reference clock for Rx, Tx, and SMI; it is I/O
-// - 11.4.2 IOMUXC_GPR_GPR1 bit 17: ENET_REF_CLK_DIR --> 1 ENET_REF_CLK is
-// output driven by ref_enetpll0
-// - 14.6.1.3.4 Ethernet PLL (PLL6)
-static inline void ethernet_init(void) {
-  gpio_init(PIN('1', 4), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL,
-            GPIO_SPEED_MEDIUM, GPIO_PULL_UP);  // set GPIO1.4 as GPIO (PHY \RST)
-  gpio_write(PIN('1', 4), 0);                  // reset PHY
-
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_08,
-                  4);  // set for ENET_REF_CLK1
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_08] |=
-      IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_ENET_RMII_SELECT_INPUT,
-                    1);  // drive peripheral from B0_08, so RMII clock is taken
-                         // from ENET_REF_CLK1
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_08, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_09, 0);  // set for RXDATA1
-  periph_mux_config(kIOMUXC_ENET_RX_DATA1_SELECT_INPUT,
-                    1);  // drive peripheral from B0_09
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_09, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_10, 0);  // set for RXDATA0
-  periph_mux_config(kIOMUXC_ENET_RX_DATA0_SELECT_INPUT,
-                    1);  // drive peripheral from B0_10
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_10, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_11, 0);  // set for CRS
-  periph_mux_config(kIOMUXC_ENET_RX_EN_SELECT_INPUT,
-                    1);  // drive peripheral from B0_11
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_11, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12, 0);  // set for RXERR
-  periph_mux_config(kIOMUXC_ENET_RX_ERR_SELECT_INPUT,
-                    1);  // drive peripheral from B0_12
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_12, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13, 0);  // set for TXEN
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_13, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_14, 0);  // set for TXDATA0
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_14, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_15, 0);  // set for TXDATA1
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_15, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_40, 4);  // set for MDIO
-  periph_mux_config(kIOMUXC_ENET_MDIO_SELECT_INPUT,
-                    2);  // drive peripheral from EMC_40
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_40, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_41, 4);  // set for MDC
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_41, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-
-  gpio_init(PIN('1', 22), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL,
-            GPIO_SPEED_MEDIUM,
-            GPIO_PULL_UP);      // set GPIO1.22 as GPIO (PHY INTRP/NAND_TREE)
-  gpio_write(PIN('1', 22), 1);  // prevent NAND_TREE
-  // 14.8.9 Use 500MHz reference and generate 50MHz. This is done at sysinit.c,
-  // as we use this source to clock the core
-  spin(10000);                 // keep PHY RST low for a while
-  gpio_write(PIN('1', 4), 1);  // deassert RST
-  gpio_init(PIN('1', 22), GPIO_MODE_INPUT, 0, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_UP);  // setup IRQ (pulled-up)(not used)
-
-  IOMUXC_GPR->GPR1 |=
-      IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR(1);  // Set ENET_REF_CLK1 as output
-  clock_periph(1, CCM_CCGR1_CG5_SHIFT, CLOCK_ON_RUN_WAIT);  // enet_ipg_clk
-  NVIC_EnableIRQ(ENET_IRQn);  // Setup Ethernet IRQ handler
-}
-
-// Helper macro for MAC generation, byte reads not allowed
-#define GENERATE_LOCALLY_ADMINISTERED_MAC()                \
-  {                                                        \
-    2, OCOTP->CFG0 & 255, (OCOTP->CFG0 >> 10) & 255,       \
-        ((OCOTP->CFG0 >> 19) ^ (OCOTP->CFG1 >> 19)) & 255, \
-        (OCOTP->CFG1 >> 10) & 255, OCOTP->CFG1 & 255       \
-  }
-
-static inline void flash_init(void) { // QSPI in FlexSPI
-  // set pins
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05, 1);  // set for DQS
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_05, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11, 1);  // set for SS
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_11, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07, 1);  // set for SCLK
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_SCLK_SELECT_INPUT, 0);  // drive peripheral from B1_07
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_07, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08, 1);  // set for DATA0
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_DATA0_SELECT_INPUT, 0);  // drive peripheral from B1_08
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_08, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10, 1);  // set for DATA1
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_DATA1_SELECT_INPUT, 0);  // drive peripheral from B1_10
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_10, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09, 1);  // set for DATA2
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_DATA2_SELECT_INPUT, 0);  // drive peripheral from B1_09
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_09, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06, 1);  // set for DATA3
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_DATA3_SELECT_INPUT, 0);  // drive peripheral from B1_06
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_06, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  // set FlexSPI clock
-  SETBITS(CCM->CSCMR1, CCM_CSCMR1_FLEXSPI_CLK_SEL_MASK | CCM_CSCMR1_FLEXSPI_PODF_MASK, CCM_CSCMR1_FLEXSPI_CLK_SEL(3) | CCM_CSCMR1_FLEXSPI_PODF(3));  // select PLL3 PFD0 /4
-  clock_periph(6, CCM_CCGR6_CG5_SHIFT, CLOCK_ON_RUN_WAIT);  // enable
-}

examples/nxp/rt1020-evk-make-baremetal-builtin/link.ld

@@ -1,24 +0,0 @@
-ENTRY(Reset_Handler);
-MEMORY {
-  flash_hdr(rx)  : ORIGIN = 0x60000000, LENGTH = 8k
-  flash_irq(rx)  : ORIGIN = 0x60002000, LENGTH = 1k
-  flash_code(rx) : ORIGIN = 0x60002400, LENGTH = 8183k
-
-  itcram(rx)     : ORIGIN = 0x00000000, LENGTH = 64k
-  dtcram(rw)     : ORIGIN = 0x20000000, LENGTH = 64k 
-  ocram(rw)      : ORIGIN = 0x20200000, LENGTH = 128k 
-}
-__StackTop = ORIGIN(dtcram) + LENGTH(dtcram);
-
-/* TODO(): separate itcram and go back to using dtcram for data and bss when ota is finished */
-
-SECTIONS {
-  .hdr  : { FILL(0xff) ; KEEP(*(.cfg)) . = 0x1000 ; KEEP(*(.ivt)) . = 0x1020 ;
-            KEEP(*(.dat)) . = 0x1030 ; KEEP(*(.dcd)) . = 0x2000 ;} >flash_hdr
-  .irq  : { KEEP(*(.isr_vector)) }  > flash_irq
-  .text : { *(.text* .text.*) *(.rodata*) ; } > flash_code
-  .data : { __data_start__ = .; *(.data SORT(.data.*)) *(.iram) __data_end__ = .; } > itcram AT > flash_code
-  __etext = LOADADDR(.data);
-  .bss  : { __bss_start__ = .; *(.bss SORT(.bss.*) COMMON) __bss_end__ = .; } > itcram
-  _end = .;
-}

examples/nxp/rt1020-evk-make-baremetal-builtin/main.c

@@ -1,70 +0,0 @@
-// Copyright (c) 2022-2023 Cesanta Software Limited
-// All rights reserved
-
-#include "hal.h"
-#include "mongoose.h"
-#include "net.h"
-
-#define BLINK_PERIOD_MS 1000  // LED blinking period in millis
-
-static volatile uint64_t s_ticks;  // Milliseconds since boot
-void SysTick_Handler(void) {       // SyStick IRQ handler, triggered every 1ms
-  s_ticks++;
-}
-
-uint64_t mg_millis(void) {  // Let Mongoose use our uptime function
-  return s_ticks;           // Return number of milliseconds since boot
-}
-
-void mg_random(void *buf, size_t len) {  // Use on-board RNG
-  for (size_t n = 0; n < len; n += sizeof(uint32_t)) {
-    uint32_t r = rng_read();
-    memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r));
-  }
-}
-static void timer_fn(void *arg) {
-  gpio_toggle(LED);                                      // Blink LED
-  struct mg_tcpip_if *ifp = arg;                         // And show
-  const char *names[] = {"down", "up", "req", "ready"};  // network stats
-  MG_INFO(("Ethernet: %s, IP: %M, rx:%u, tx:%u, dr:%u, er:%u",
-           names[ifp->state], mg_print_ip4, &ifp->ip, ifp->nrecv, ifp->nsent,
-           ifp->ndrop, ifp->nerr));
-}
-
-int main(void) {
-  gpio_output(LED);               // Setup blue LED
-  uart_init(UART_DEBUG, 115200);  // Initialise debug printf
-  ethernet_init();                // Initialise ethernet pins
-  MG_INFO(("Starting, CPU freq %g MHz", (double) SystemCoreClock / 1000000));
-
-  struct mg_mgr mgr;        // Initialise
-  mg_mgr_init(&mgr);        // Mongoose event manager
-  mg_log_set(MG_LL_DEBUG);  // Set log level
-
-  // Initialise Mongoose network stack
-  struct mg_tcpip_driver_imxrt_data driver_data = {.mdc_cr = 24, .phy_addr = 2};
-  struct mg_tcpip_if mif = {.mac = GENERATE_LOCALLY_ADMINISTERED_MAC(),
-                            // Uncomment below for static configuration:
-                            // .ip = mg_htonl(MG_U32(192, 168, 0, 223)),
-                            // .mask = mg_htonl(MG_U32(255, 255, 255, 0)),
-                            // .gw = mg_htonl(MG_U32(192, 168, 0, 1)),
-                            .driver = &mg_tcpip_driver_imxrt,
-                            .driver_data = &driver_data};
-  mg_tcpip_init(&mgr, &mif);
-  mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mif);
-
-  MG_INFO(("MAC: %M. Waiting for IP...", mg_print_mac, mif.mac));
-  while (mif.state != MG_TCPIP_STATE_READY) {
-    mg_mgr_poll(&mgr, 0);
-  }
-
-  MG_INFO(("Initialising application..."));
-  web_init(&mgr);
-
-  MG_INFO(("Starting event loop"));
-  for (;;) {
-    mg_mgr_poll(&mgr, 0);
-  }
-
-  return 0;
-}

examples/nxp/rt1020-evk-make-baremetal-builtin/mongoose_config.h

@@ -1,14 +0,0 @@
-#pragma once
-
-// See https://mongoose.ws/documentation/#build-options
-#define MG_ARCH MG_ARCH_NEWLIB
-#define MG_OTA MG_OTA_FLASH
-#define MG_DEVICE MG_DEVICE_RT1020
-
-#define MG_ENABLE_TCPIP 1
-#define MG_ENABLE_DRIVER_IMXRT 1
-#define MG_IO_SIZE 256
-#define MG_ENABLE_CUSTOM_MILLIS 1
-#define MG_ENABLE_CUSTOM_RANDOM 1
-#define MG_ENABLE_PACKED_FS 1
-

examples/nxp/rt1020-evk-make-baremetal-builtin/syscalls.c

@@ -1,98 +0,0 @@
-#include <sys/stat.h>
-
-#include "hal.h"
-
-int _fstat(int fd, struct stat *st) {
-  if (fd < 0) return -1;
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-void *_sbrk(int incr) {
-  extern char _end;
-  static unsigned char *heap = NULL;
-  unsigned char *prev_heap;
-  unsigned char x = 0, *heap_end = (unsigned char *)((size_t) &x - 512);
-  (void) x;
-  if (heap == NULL) heap = (unsigned char *) &_end;
-  prev_heap = heap;
-  if (heap + incr > heap_end) return (void *) -1;
-  heap += incr;
-  return prev_heap;
-}
-
-int _open(const char *path) {
-  (void) path;
-  return -1;
-}
-
-int _close(int fd) {
-  (void) fd;
-  return -1;
-}
-
-int _isatty(int fd) {
-  (void) fd;
-  return 1;
-}
-
-int _lseek(int fd, int ptr, int dir) {
-  (void) fd, (void) ptr, (void) dir;
-  return 0;
-}
-
-void _exit(int status) {
-  (void) status;
-  for (;;) asm volatile("BKPT #0");
-}
-
-void _kill(int pid, int sig) {
-  (void) pid, (void) sig;
-}
-
-int _getpid(void) {
-  return -1;
-}
-
-int _write(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  if (fd == 1) uart_write_buf(UART_DEBUG, ptr, (size_t) len);
-  return -1;
-}
-
-int _read(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  return -1;
-}
-
-int _link(const char *a, const char *b) {
-  (void) a, (void) b;
-  return -1;
-}
-
-int _unlink(const char *a) {
-  (void) a;
-  return -1;
-}
-
-int _stat(const char *path, struct stat *st) {
-  (void) path, (void) st;
-  return -1;
-}
-
-int mkdir(const char *path, mode_t mode) {
-  (void) path, (void) mode;
-  return -1;
-}
-
-void _init(void) {}
-
-extern uint64_t mg_now(void);
-
-int _gettimeofday(struct timeval *tv, void *tz) {
-  uint64_t now = mg_now();
-  (void) tz;
-  tv->tv_sec = (time_t) (now / 1000);
-  tv->tv_usec = (unsigned long) ((now % 1000) * 1000);
-  return 0;
-}

examples/nxp/rt1020-evk-make-baremetal-builtin/sysinit.c

@@ -1,82 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-//
-// This file contains essentials required by the CMSIS:
-// uint32_t SystemCoreClock - holds the system core clock value
-// SystemInit() - initialises the system, e.g. sets up clocks
-
-#include "hal.h"
-
-uint32_t SystemCoreClock = SYS_FREQUENCY;
-
-// - 14.4, Figure 14-2: clock tree
-// - 14.7.4: ARM_PODF defaults to /1
-// - 14.7.5: AHB_PODF defaults to /1; PERIPH_CLK_SEL defaults to derive clock
-// from pre_periph_clk_sel
-// - 14.7.6: PRE_PERIPH_CLK_SEL defaults to derive clock from PLL2 PFD3.
-// - (For 528MHz operation, we need to set it to derive clock from PLL2, but
-// this chip max is 500 MHz).
-// - 14.6.1.3.1 System PLL (PLL2); 13.3.2.2 PLLs; 14.6.1.4 Phase Fractional
-// Dividers (PFD)
-// - 14.8.2: PLL2 is powered off and bypassed to 24MHz
-// - 14.8.11: PFD defaults to 18/16 but Figure 14-2 shows half the value
-// ("divider")
-// - For 500MHz operation, we need to set PRE_PERIPH_CLK_SEL to derive clock
-// from divided PLL6
-// - 14.8.9: configure PLL6 to generate a 500MHz clock
-// - Datasheet 4.1.3: System frequency/Bus frequency max 500/125MHz respectively
-// (AHB/IPG)
-// - MCUXpresso: IPG_CLK_ROOT <= 125MHz; PERCLK_CLK_ROOT <= 62.5MHz
-// - Datasheet 4.8.4.1.1/2: the processor clock frequency must exceed twice the
-// ENET_RX_CLK/ENET_TX_CLK frequency.
-// - Datasheet 4.8.4.2: no details for RMII (above is for MII), assumed 50MHz
-// min processor clock
-// - Datasheet 4.1.3, Table 11: "Overdrive" run mode requires 1.25V core voltage
-// minimum
-void SystemInit(void) {  // Called automatically by startup code (ints masked)
-  SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2));  // Enable FPU
-  asm("DSB");
-  asm("ISB");
-  // 53.4.2: Disable watchdog after reset (unlocked)
-  RTWDOG->CS &= ~RTWDOG_CS_EN_MASK;
-  RTWDOG->TOVAL = 0xFFFF;
-  while (RTWDOG->CS & RTWDOG_CS_ULK_MASK) spin(1);  // wait for lock
-  while ((RTWDOG->CS & RTWDOG_CS_RCS_MASK) == 0)
-    spin(1);  // wait for new config
-  // Set VDD_SOC to 1.25V
-  SETBITS(DCDC->REG3, DCDC_REG3_TRG_MASK, DCDC_REG3_TRG(0x12));
-  while ((DCDC->REG0 & DCDC_REG0_STS_DC_OK_MASK) == 0)
-    spin(1);  // Wait for DCDC_STS_DC_OK
-  // 14.8.9 Init 500MHz reference, clock the M7 core with it, generate 50MHz for
-  // ENET and RMII.
-  SETBITS(CCM_ANALOG->PLL_ENET, CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC_MASK,
-          CCM_ANALOG_PLL_ENET_BYPASS_MASK |
-              CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC(0));  // bypass to 24MHz osc
-  SETBITS(
-      CCM_ANALOG->PLL_ENET,
-      CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK | CCM_ANALOG_PLL_ENET_POWERDOWN_MASK,
-      CCM_ANALOG_PLL_ENET_DIV_SELECT(1) | CCM_ANALOG_PLL_ENET_ENABLE_MASK |
-          CCM_ANALOG_PLL_ENET_ENET_500M_REF_EN_MASK);  // setup PLL
-  while ((CCM_ANALOG->PLL_ENET & CCM_ANALOG_PLL_ENET_LOCK_MASK) == 0)
-    spin(1);  // wait until it is stable
-  CCM_ANALOG->PLL_ENET &=
-      ~CCM_ANALOG_PLL_ENET_BYPASS_MASK;  // Disable Bypass (switch to PLL)
-  SETBITS(CCM->CBCDR, CCM_CBCDR_IPG_PODF_MASK,
-          CCM_CBCDR_IPG_PODF(3));  // Set IPG divider /4 (125MHz)
-  SETBITS(CCM->CSCMR1, CCM_CSCMR1_PERCLK_PODF_MASK,
-          CCM_CSCMR1_PERCLK_PODF(1));  // Set PERCLK divider /2 (62.5MHz)
-  SETBITS(CCM->CBCMR, CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK,
-          CCM_CBCMR_PRE_PERIPH_CLK_SEL(3));  // run from 500MHz clock
-  // 14.5 Table 14-4: uart_clk_root
-  // 14.4: uart_clk_root = PLL3/6 or OSC; CCM_CSCDR1 (14.7.9) defaults to
-  // PLL3/6/1; but ROM boot code fiddles with the divider (9.5.3 Table 9-7)
-  CCM_ANALOG->PLL_USB1 |= CCM_ANALOG_PLL_USB1_POWER_MASK;  // Power PLL on
-  while ((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_LOCK_MASK) == 0)
-    spin(1);  // wait until it is stable
-  CCM_ANALOG->PLL_USB1 &=
-      ~CCM_ANALOG_PLL_USB1_BYPASS_MASK;  // Disable Bypass (switch to PLL)
-  CCM->CSCDR1 &= ~(CCM_CSCDR1_UART_CLK_SEL_MASK | CCM_CSCDR1_UART_CLK_PODF_MASK);
-  rng_init();                            // Initialise random number generator
-  // NXP startup code calls SystemInit BEFORE initializing RAM...
-  SysTick_Config(SYS_FREQUENCY / 1000);  // Sys tick every 1ms
-}

examples/nxp/rt1020-evk-make-freertos-builtin/FreeRTOSConfig.h

@@ -1,38 +0,0 @@
-#pragma once
-
-#include "hal.h"
-
-#define configUSE_PREEMPTION 1
-#define configCPU_CLOCK_HZ SYS_FREQUENCY
-#define configTICK_RATE_HZ 1000
-#define configMAX_PRIORITIES 5
-#define configUSE_16_BIT_TICKS 0
-#define configUSE_TICK_HOOK 0
-#define configUSE_IDLE_HOOK 0
-#define configUSE_TIMERS 0
-#define configUSE_CO_ROUTINES 0
-#define configUSE_MALLOC_FAILED_HOOK 0
-#define configMINIMAL_STACK_SIZE 128
-#define configTOTAL_HEAP_SIZE (1024 * 32)
-#define INCLUDE_vTaskDelay 1
-#define INCLUDE_xTaskGetSchedulerState 1  // trying
-
-#ifdef __NVIC_PRIO_BITS
-#define configPRIO_BITS __NVIC_PRIO_BITS
-#else
-#define configPRIO_BITS 4
-#endif
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 15
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
-#define configKERNEL_INTERRUPT_PRIORITY \
-  (configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
-
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY \
-  (configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
-
-#define configASSERT(expr) \
-  if (!(expr)) printf("FAILURE %s:%d: %s\n", __FILE__, __LINE__, #expr)
-
-#define vPortSVCHandler SVC_Handler
-#define xPortPendSVHandler PendSV_Handler
-#define xPortSysTickHandler SysTick_Handler

examples/nxp/rt1020-evk-make-freertos-builtin/Makefile

@@ -1,84 +1,29 @@
-CFLAGS  = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion
-CFLAGS += -Wformat-truncation -fno-common # -Wconversion is not SDK-friendly
-CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
-CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_mcu/devices/MIMXRT1021
-CFLAGS += -Icmsis_mcu/devices/MIMXRT1021/drivers -DCPU_MIMXRT1021DAG5A
-CFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA)
-LDSCRIPT = link.ld
-LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map 
+BOARD = rt1020
+IDE = GCC+make
+RTOS = FreeRTOS
+WIZARD_URL ?= http://mongoose.ws/wizard
 
-SOURCES = main.c syscalls.c sysinit.c
-SOURCES += cmsis_mcu/devices/MIMXRT1021/gcc/startup_MIMXRT1021.S # NXP startup file. Compiler-dependent!
-CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS	# Make startup code work as expected
-
-# FreeRTOS. RT1020 has a Cortex-M7 r1p2 core, FreeRTOS recommends using CM4F port for non-r0p1 CM7 micros
-SOURCES += FreeRTOS-Kernel/portable/MemMang/heap_4.c
-SOURCES += FreeRTOS-Kernel/portable/GCC/ARM_CM4F/port.c
-CFLAGS += -IFreeRTOS-Kernel/include 
-CFLAGS += -IFreeRTOS-Kernel/portable/GCC/ARM_CM4F -Wno-conversion
-
-# Mongoose options are defined in mongoose_config.h
-SOURCES += mongoose.c net.c packed_fs.c
-
-# Example specific build options. See README.md
-CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\"
-
-ifeq ($(OS),Windows_NT)
-  RM = cmd /C del /Q /F /S
-else
-  RM = rm -rf
-endif
-
-all build example update: SOURCES += flash_image.c
 all build example: firmware.bin
 
-ram: LDSCRIPT = link_ram.ld
-ram: firmware.bin
+firmware.bin: wizard
+	make -C wizard CFLAGS_EXTRA=$(CFLAGS_EXTRA) && mv wizard/firmware.bin ./
 
-firmware.bin: firmware.elf
-	arm-none-eabi-objcopy -O binary $< $@
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard ; rm mongoose.[ch] ; ln -s ../../../../mongoose.c ; ln -s ../../../../mongoose.h
 
-firmware.elf: FreeRTOS-Kernel cmsis_core cmsis_mcu $(SOURCES) hal.h link_ram.ld link.ld mongoose_config.h
-	arm-none-eabi-gcc $(SOURCES) $(wildcard FreeRTOS-Kernel/*.c) $(CFLAGS) $(LDFLAGS) -o $@
-
-flash: firmware.bin
-# flash
-
-cmsis_core:     # ARM CMSIS core headers
-	git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
-cmsis_mcu:
-	curl -sL https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.MIMXRT1021_DFP.17.0.0.pack -o $@.zip
-	mkdir $@ && cd $@ && unzip -q ../$@.zip
-FreeRTOS-Kernel:  # FreeRTOS sources
-	git clone --depth 1 -b V10.5.0 https://github.com/FreeRTOS/FreeRTOS-Kernel $@
 
 # Automated remote test. Requires env variable VCON_API_KEY set. See https://vcon.io/automated-firmware-tests/
 DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/4
 update: firmware.bin
 	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
 
-update updateram: CFLAGS += -DUART_DEBUG=LPUART2
-
+test update: CFLAGS_EXTRA ="-DUART_DEBUG=LPUART2"
 test: update
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=15 | tee /tmp/output.txt
 	grep 'READY, IP:' /tmp/output.txt       # Check for network init
 
-
-updateram: ram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @firmware.bin
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0003 wm,e000edfc,1 wm,e000ed0c,5fa0004"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	PC=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,4"}' | jq -r .resp[5:]` && \
-	SP=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,0"}' | jq -r .resp[5:]` && \
-	REQ="wm,e000ed08,0 wr,d,$$SP wr,f,$$PC" && \
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"'"$$REQ"'"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0001"}'
-
-testram: updateram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
-	grep 'READY, IP:' /tmp/output.txt       # Check for network init
-
-
 clean:
-	$(RM) firmware.* *.su cmsis_core cmsis_mcu FreeRTOS-Kernel *.zip
+	rm -rf firmware.* wizard*

examples/nxp/rt1020-evk-make-freertos-builtin/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=rt1020&ide=GCC+make&rtos=FreeRTOS&file=README.md)

examples/nxp/rt1020-evk-make-freertos-builtin/dcd.h

@@ -1 +0,0 @@
-../rt1020-evk-make-baremetal-builtin/dcd.h

examples/nxp/rt1020-evk-make-freertos-builtin/flash_image.c

@@ -1 +0,0 @@
-../rt1020-evk-make-baremetal-builtin/flash_image.c

examples/nxp/rt1020-evk-make-freertos-builtin/hal.h

@@ -1,337 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-// https://www.nxp.com/webapp/Download?colCode=IMXRT1020RM
-// https://cache.nxp.com/secured/assets/documents/en/user-guide/MIMXRT1020EVKHUG.pdf
-
-#pragma once
-
-#include "MIMXRT1021.h"
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <string.h>
-
-#define BIT(x) (1UL << (x))
-#define SETBITS(R, CLEARMASK, SETMASK) (R) = ((R) & ~(CLEARMASK)) | (SETMASK)
-#define PIN(bank, num) ((((bank) - '0') << 8) | (num))
-#define PINNO(pin) (pin & 255)
-#define PINBANK(pin) (pin >> 8)
-
-// Use LED for blinking, GPIO_AD_B0_05. GPIO1.5 (schematics)
-#define LED PIN('1', 5)
-
-#ifndef UART_DEBUG
-#define UART_DEBUG LPUART1
-#endif
-
-// No settable constants, see sysinit.c
-#define SYS_FREQUENCY 500000000UL
-
-static inline void spin(volatile uint32_t count) {
-  while (count--) (void) 0;
-}
-
-enum { CLOCK_OFF = 0U, CLOCK_ON_RUN = 1U, CLOCK_ON_RUN_WAIT = 3U };
-static inline void clock_periph(uint32_t index, uint32_t shift, uint32_t val) {
-  volatile uint32_t *r = &CCM->CCGR0;
-  SETBITS(r[index], 3UL << shift, val << shift);
-}
-
-// which peripheral feeds the pin
-static inline void gpio_mux_config(uint16_t index, uint8_t af) {
-  IOMUXC->SW_MUX_CTL_PAD[index] = af;
-}
-
-// which pin feeds the peripheral (2nd stage)
-static inline void periph_mux_config(uint16_t index, uint8_t in) {
-  IOMUXC->SELECT_INPUT[index] = in;
-}
-
-enum { GPIO_MODE_INPUT, GPIO_MODE_OUTPUT };
-enum { GPIO_OTYPE_PUSH_PULL, GPIO_OTYPE_OPEN_DRAIN };
-enum { GPIO_SPEED_LOW, GPIO_SPEED_MEDIUM, GPIO_SPEED_MEDIUM_, GPIO_SPEED_HIGH };
-enum { GPIO_PULL_NONE, GPIO_PULL_DOWN, GPIO_PULL_UP };
-static inline GPIO_Type *gpio_bank(uint16_t pin) {
-  static const GPIO_Type *g[] = {NULL, GPIO1, GPIO2, GPIO3, NULL, GPIO5};
-  return (GPIO_Type *) g[PINBANK(pin)];
-}
-
-// pin driver/pull-up/down configuration (ignore "keeper")
-static inline void gpio_pad_config(uint16_t index, uint8_t type, uint8_t speed,
-                                   uint8_t pull) {
-  bool dopull = pull > 0;
-  if (dopull) --pull;
-  IOMUXC->SW_PAD_CTL_PAD[index] =
-      IOMUXC_SW_PAD_CTL_PAD_SPEED(speed) | IOMUXC_SW_PAD_CTL_PAD_ODE(type) |
-      IOMUXC_SW_PAD_CTL_PAD_SRE(speed >= GPIO_SPEED_HIGH) |
-      IOMUXC_SW_PAD_CTL_PAD_PUE(1) | IOMUXC_SW_PAD_CTL_PAD_PKE(dopull) |
-      IOMUXC_SW_PAD_CTL_PAD_PUS(pull) | IOMUXC_SW_PAD_CTL_PAD_DSE(7);
-}
-
-static inline void gpio_init(uint16_t pin, uint8_t mode, uint8_t type,
-                             uint8_t speed, uint8_t pull) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint8_t bit = (uint8_t) PINNO(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  switch (PINBANK(pin)) {
-    case 1:
-      gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_00 + bit, 5);
-      gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_00 + bit, type, speed,
-                      pull);
-      clock_periph(1, CCM_CCGR1_CG13_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 2:
-      gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_00 + bit, 5);
-      gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_00 + bit, type, speed,
-                      pull);
-      clock_periph(0, CCM_CCGR0_CG15_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 3:
-      gpio_mux_config(bit < 13
-                          ? kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32 + bit
-                          : kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00 + bit - 13,
-                      5);
-      gpio_pad_config(bit < 13
-                          ? kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_32 + bit
-                          : kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B0_00 + bit - 13,
-                      type, speed, pull);
-      clock_periph(2, CCM_CCGR2_CG13_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 5:
-      // TODO(): support sw_mux
-      clock_periph(1, CCM_CCGR1_CG15_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    default:
-      break;
-  }
-
-  gpio->IMR &= ~mask;
-  if (mode == GPIO_MODE_INPUT) {
-    gpio->GDIR &= ~mask;
-  } else {
-    gpio->GDIR |= mask;
-  }
-}
-static inline void gpio_input(uint16_t pin) {
-  gpio_init(pin, GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_NONE);
-}
-static inline void gpio_output(uint16_t pin) {
-  gpio_init(pin, GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_NONE);
-}
-
-static inline bool gpio_read(uint16_t pin) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-  return gpio->DR & mask;
-}
-static inline void gpio_write(uint16_t pin, bool value) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-  if (value) {
-    gpio->DR |= mask;
-  } else {
-    gpio->DR &= ~mask;
-  }
-}
-static inline void gpio_toggle(uint16_t pin) {
-  gpio_write(pin, !gpio_read(pin));
-}
-
-// 14.5 Table 14-4: uart_clk_root
-// see sysinit.c for clocks, (14.7.9: defaults to PLL3/6/1 = 80MHz)
-static inline void uart_init(LPUART_Type *uart, unsigned long baud) {
-  uint8_t af = 2;                           // Alternate function
-  uint16_t mr = 0, pr = 0, mt = 0, pt = 0;  // pins
-  uint32_t freq = 80000000;                 // uart_clk_root frequency
-  if (uart == LPUART1)
-    mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_06,
-    pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_06,
-    mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_07,
-    pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_07;
-  if (uart == LPUART2)
-    mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08,
-    pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_08,
-    mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09,
-    pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_09;
-
-  if (uart == LPUART1) clock_periph(5, CCM_CCGR5_CG12_SHIFT, CLOCK_ON_RUN_WAIT);
-  if (uart == LPUART2) clock_periph(0, CCM_CCGR0_CG14_SHIFT, CLOCK_ON_RUN_WAIT);
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  gpio_mux_config(mt, af);
-  gpio_pad_config(pt, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-  gpio_mux_config(mr, af);
-  gpio_pad_config(pr, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-
-  uart->GLOBAL |= LPUART_GLOBAL_RST_MASK;  // reset, CTRL = 0, defaults
-  uart->GLOBAL &= ~LPUART_GLOBAL_RST_MASK;
-  SETBITS(uart->BAUD,
-          LPUART_BAUD_OSR_MASK | LPUART_BAUD_SBR_MASK | LPUART_BAUD_SBNS_MASK,
-          LPUART_BAUD_OSR(16 - 1) |
-              LPUART_BAUD_SBR(freq / (16 * baud)));  // Rx sample at 16x
-  SETBITS(uart->CTRL,
-          LPUART_CTRL_PE_MASK | LPUART_CTRL_M_MASK | LPUART_CTRL_ILT_MASK |
-              LPUART_CTRL_IDLECFG_MASK,
-          LPUART_CTRL_IDLECFG(1) | LPUART_CTRL_ILT(1) |
-              LPUART_BAUD_SBNS(0));  // no parity, idle 2 chars after 1 stop bit
-  uart->CTRL |= LPUART_CTRL_TE_MASK | LPUART_CTRL_RE_MASK;
-}
-
-static inline void uart_write_byte(LPUART_Type *uart, uint8_t byte) {
-  uart->DATA = byte;
-  while ((uart->STAT & LPUART_STAT_TDRE_MASK) == 0) spin(1);
-}
-static inline void uart_write_buf(LPUART_Type *uart, char *buf, size_t len) {
-  while (len-- > 0) uart_write_byte(uart, *(uint8_t *) buf++);
-}
-static inline int uart_read_ready(LPUART_Type *uart) {
-  (void) uart;
-  return uart->STAT & LPUART_STAT_RDRF_MASK;
-}
-static inline uint8_t uart_read_byte(LPUART_Type *uart) {
-  return (uint8_t) (uart->DATA & 255);
-}
-
-static inline void rng_init(void) {
-  clock_periph(6, CCM_CCGR6_CG6_SHIFT, CLOCK_ON_RUN_WAIT);  // trng_clk
-  SETBITS(TRNG->MCTL,
-          TRNG_MCTL_PRGM_MASK | TRNG_MCTL_ERR_MASK | TRNG_MCTL_RST_DEF_MASK,
-          TRNG_MCTL_PRGM(1) | TRNG_MCTL_ERR(1) |
-              TRNG_MCTL_RST_DEF(1));  // reset to default values
-  SETBITS(TRNG->MCTL, TRNG_MCTL_PRGM_MASK | TRNG_MCTL_ERR_MASK,
-          TRNG_MCTL_PRGM(0));            // set to run mode
-  (void) TRNG->ENT[TRNG_ENT_COUNT - 1];  // start new entropy generation
-  (void) TRNG->ENT[0];                   // defect workaround
-}
-static inline uint32_t rng_read(void) {
-  static uint8_t idx = 0;
-  while ((TRNG->MCTL & TRNG_MCTL_ENT_VAL_MASK) == 0) (void) 0;
-  uint32_t data = TRNG->ENT[idx++];  // read data
-  idx %= TRNG_ENT_COUNT;             // stay within array limits
-  if (idx == 0)                      // we've just read TRNG_ENT_COUNT - 1
-    (void) TRNG->ENT[0];             // defect workaround
-  return data;
-}
-
-// - PHY has no xtal, XI driven from ENET_REF_CLK1 (labeled as ENET_TX_CLK
-// (GPIO_AD_B0_08)), generated by the MCU
-// - PHY RST connected to GPIO1.4 (GPIO_AD_B0_04); INTRP/NAND_TREE connected to
-// GPIO1.22 (GPIO_AD_B1_06)
-// - 37.4 REF_CLK1 is RMII mode reference clock for Rx, Tx, and SMI; it is I/O
-// - 11.4.2 IOMUXC_GPR_GPR1 bit 17: ENET_REF_CLK_DIR --> 1 ENET_REF_CLK is
-// output driven by ref_enetpll0
-// - 14.6.1.3.4 Ethernet PLL (PLL6)
-static inline void ethernet_init(void) {
-  gpio_init(PIN('1', 4), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL,
-            GPIO_SPEED_MEDIUM, GPIO_PULL_UP);  // set GPIO1.4 as GPIO (PHY \RST)
-  gpio_write(PIN('1', 4), 0);                  // reset PHY
-
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_08,
-                  4);  // set for ENET_REF_CLK1
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_08] |=
-      IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_ENET_RMII_SELECT_INPUT,
-                    1);  // drive peripheral from B0_08, so RMII clock is taken
-                         // from ENET_REF_CLK1
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_08, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_09, 0);  // set for RXDATA1
-  periph_mux_config(kIOMUXC_ENET_RX_DATA1_SELECT_INPUT,
-                    1);  // drive peripheral from B0_09
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_09, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_10, 0);  // set for RXDATA0
-  periph_mux_config(kIOMUXC_ENET_RX_DATA0_SELECT_INPUT,
-                    1);  // drive peripheral from B0_10
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_10, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_11, 0);  // set for CRS
-  periph_mux_config(kIOMUXC_ENET_RX_EN_SELECT_INPUT,
-                    1);  // drive peripheral from B0_11
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_11, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12, 0);  // set for RXERR
-  periph_mux_config(kIOMUXC_ENET_RX_ERR_SELECT_INPUT,
-                    1);  // drive peripheral from B0_12
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_12, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13, 0);  // set for TXEN
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_13, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_14, 0);  // set for TXDATA0
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_14, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_15, 0);  // set for TXDATA1
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_15, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_40, 4);  // set for MDIO
-  periph_mux_config(kIOMUXC_ENET_MDIO_SELECT_INPUT,
-                    2);  // drive peripheral from EMC_40
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_40, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_41, 4);  // set for MDC
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_41, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-
-  gpio_init(PIN('1', 22), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL,
-            GPIO_SPEED_MEDIUM,
-            GPIO_PULL_UP);      // set GPIO1.22 as GPIO (PHY INTRP/NAND_TREE)
-  gpio_write(PIN('1', 22), 1);  // prevent NAND_TREE
-  // 14.8.9 Use 500MHz reference and generate 50MHz. This is done at sysinit.c,
-  // as we use this source to clock the core
-  spin(10000);                 // keep PHY RST low for a while
-  gpio_write(PIN('1', 4), 1);  // deassert RST
-  gpio_init(PIN('1', 22), GPIO_MODE_INPUT, 0, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_UP);  // setup IRQ (pulled-up)(not used)
-
-  IOMUXC_GPR->GPR1 |=
-      IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR(1);  // Set ENET_REF_CLK1 as output
-  clock_periph(1, CCM_CCGR1_CG5_SHIFT, CLOCK_ON_RUN_WAIT);  // enet_ipg_clk
-  NVIC_EnableIRQ(ENET_IRQn);  // Setup Ethernet IRQ handler
-}
-
-// Helper macro for MAC generation, byte reads not allowed
-#define GENERATE_LOCALLY_ADMINISTERED_MAC()                \
-  {                                                        \
-    2, OCOTP->CFG0 & 255, (OCOTP->CFG0 >> 10) & 255,       \
-        ((OCOTP->CFG0 >> 19) ^ (OCOTP->CFG1 >> 19)) & 255, \
-        (OCOTP->CFG1 >> 10) & 255, OCOTP->CFG1 & 255       \
-  }
-
-static inline void flash_init(void) { // QSPI in FlexSPI
-  // set pins
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05, 1);  // set for DQS
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_05, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11, 1);  // set for SS
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_11, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07, 1);  // set for SCLK
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_SCLK_SELECT_INPUT, 0);  // drive peripheral from B1_07
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_07, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08, 1);  // set for DATA0
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_DATA0_SELECT_INPUT, 0);  // drive peripheral from B1_08
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_08, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10, 1);  // set for DATA1
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_DATA1_SELECT_INPUT, 0);  // drive peripheral from B1_10
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_10, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09, 1);  // set for DATA2
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_DATA2_SELECT_INPUT, 0);  // drive peripheral from B1_09
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_09, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06, 1);  // set for DATA3
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPI_A_DATA3_SELECT_INPUT, 0);  // drive peripheral from B1_06
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_06, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  // set FlexSPI clock
-  SETBITS(CCM->CSCMR1, CCM_CSCMR1_FLEXSPI_CLK_SEL_MASK | CCM_CSCMR1_FLEXSPI_PODF_MASK, CCM_CSCMR1_FLEXSPI_CLK_SEL(3) | CCM_CSCMR1_FLEXSPI_PODF(3));  // select PLL3 PFD0 /4
-  clock_periph(6, CCM_CCGR6_CG5_SHIFT, CLOCK_ON_RUN_WAIT);  // enable
-}

examples/nxp/rt1020-evk-make-freertos-builtin/link.ld

@@ -1,22 +0,0 @@
-ENTRY(Reset_Handler);
-MEMORY {
-  flash_hdr(rx)  : ORIGIN = 0x60000000, LENGTH = 8k
-  flash_irq(rx)  : ORIGIN = 0x60002000, LENGTH = 1k
-  flash_code(rx) : ORIGIN = 0x60002400, LENGTH = 8183k
-
-  itcram(rx)     : ORIGIN = 0x00000000, LENGTH = 64k
-  dtcram(rw)     : ORIGIN = 0x20000000, LENGTH = 64k 
-  ocram(rw)      : ORIGIN = 0x20200000, LENGTH = 128k 
-}
-__StackTop = ORIGIN(dtcram) + LENGTH(dtcram);
-
-SECTIONS {
-  .hdr  : { FILL(0xff) ; KEEP(*(.cfg)) . = 0x1000 ; KEEP(*(.ivt)) . = 0x1020 ;
-            KEEP(*(.dat)) . = 0x1030 ; KEEP(*(.dcd)) . = 0x2000 ;} >flash_hdr
-  .irq  : { KEEP(*(.isr_vector)) }  > flash_irq
-  .text : { *(.text* .text.*) *(.rodata*) ; } > flash_code
-  .data : { __data_start__ = .; *(.data SORT(.data.*)) __data_end__ = .; } > dtcram AT > flash_code
-  __etext = LOADADDR(.data);
-  .bss  : { __bss_start__ = .; *(.bss SORT(.bss.*) COMMON) __bss_end__ = .; } > dtcram
-  _end = .;
-}

examples/nxp/rt1020-evk-make-freertos-builtin/main.c

@@ -1,74 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-
-#include "hal.h"
-#include "mongoose.h"
-#include "net.h"
-
-#define BLINK_PERIOD_MS 1000  // LED blinking period in millis
-
-void mg_random(void *buf, size_t len) {  // Use on-board RNG
-  for (size_t n = 0; n < len; n += sizeof(uint32_t)) {
-    uint32_t r = rng_read();
-    memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r));
-  }
-}
-
-static void timer_fn(void *arg) {
-  struct mg_tcpip_if *ifp = arg;                         // And show
-  const char *names[] = {"down", "up", "req", "ready"};  // network stats
-  MG_INFO(("Ethernet: %s, IP: %M, rx:%u, tx:%u, dr:%u, er:%u",
-           names[ifp->state], mg_print_ip4, &ifp->ip, ifp->nrecv, ifp->nsent,
-           ifp->ndrop, ifp->nerr));
-}
-
-static void server(void *args) {
-  struct mg_mgr mgr;        // Initialise Mongoose event manager
-  mg_mgr_init(&mgr);        // and attach it to the interface
-  mg_log_set(MG_LL_DEBUG);  // Set log level
-
-  // Initialise Mongoose network stack
-  ethernet_init();
-  struct mg_tcpip_driver_imxrt_data driver_data = {.mdc_cr = 24, .phy_addr = 2};
-  struct mg_tcpip_if mif = {.mac = GENERATE_LOCALLY_ADMINISTERED_MAC(),
-                            // Uncomment below for static configuration:
-                            // .ip = mg_htonl(MG_U32(192, 168, 0, 223)),
-                            // .mask = mg_htonl(MG_U32(255, 255, 255, 0)),
-                            // .gw = mg_htonl(MG_U32(192, 168, 0, 1)),
-                            .driver = &mg_tcpip_driver_imxrt,
-                            .driver_data = &driver_data};
-  mg_tcpip_init(&mgr, &mif);
-  mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mif);
-
-  MG_INFO(("MAC: %M. Waiting for IP...", mg_print_mac, mif.mac));
-  while (mif.state != MG_TCPIP_STATE_READY) {
-    mg_mgr_poll(&mgr, 0);
-  }
-
-  MG_INFO(("Initialising application..."));
-  web_init(&mgr);
-
-  MG_INFO(("Starting event loop"));
-  for (;;) mg_mgr_poll(&mgr, 1);  // Infinite event loop
-  (void) args;
-}
-
-static void blinker(void *args) {
-  gpio_output(LED);  // Setup blue LED
-  for (;;) {
-    gpio_toggle(LED);
-    vTaskDelay(pdMS_TO_TICKS(BLINK_PERIOD_MS));
-  }
-  (void) args;
-}
-
-int main(void) {
-  uart_init(UART_DEBUG, 115200);  // Initialise UART
-
-  // Start tasks. NOTE: stack sizes are in 32-bit words
-  xTaskCreate(blinker, "blinker", 128, ":)", configMAX_PRIORITIES - 1, NULL);
-  xTaskCreate(server, "server", 2048, 0, configMAX_PRIORITIES - 1, NULL);
-
-  vTaskStartScheduler();  // This blocks
-  return 0;
-}

examples/nxp/rt1020-evk-make-freertos-builtin/mongoose_config.h

@@ -1,13 +0,0 @@
-#pragma once
-
-#include <errno.h>	// we are not using lwIP
-
-// See https://mongoose.ws/documentation/#build-options
-#define MG_ARCH MG_ARCH_FREERTOS
-
-#define MG_ENABLE_TCPIP 1
-#define MG_ENABLE_DRIVER_IMXRT 1
-#define MG_IO_SIZE 256
-#define MG_ENABLE_CUSTOM_RANDOM 1
-#define MG_ENABLE_PACKED_FS 1
-

examples/nxp/rt1020-evk-make-freertos-builtin/syscalls.c

@@ -1,85 +0,0 @@
-#include <sys/stat.h>
-
-#include "hal.h"
-
-int _fstat(int fd, struct stat *st) {
-  if (fd < 0) return -1;
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-void *_sbrk(int incr) {
-  extern char _end;
-  static unsigned char *heap = NULL;
-  unsigned char *prev_heap;
-  if (heap == NULL) heap = (unsigned char *) &_end;
-  prev_heap = heap;
-  heap += incr;
-  return prev_heap;
-}
-
-int _open(const char *path) {
-  (void) path;
-  return -1;
-}
-
-int _close(int fd) {
-  (void) fd;
-  return -1;
-}
-
-int _isatty(int fd) {
-  (void) fd;
-  return 1;
-}
-
-int _lseek(int fd, int ptr, int dir) {
-  (void) fd, (void) ptr, (void) dir;
-  return 0;
-}
-
-void _exit(int status) {
-  (void) status;
-  for (;;) asm volatile("BKPT #0");
-}
-
-void _kill(int pid, int sig) {
-  (void) pid, (void) sig;
-}
-
-int _getpid(void) {
-  return -1;
-}
-
-int _write(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  if (fd == 1) uart_write_buf(UART_DEBUG, ptr, (size_t) len);
-  return -1;
-}
-
-int _read(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  return -1;
-}
-
-int _link(const char *a, const char *b) {
-  (void) a, (void) b;
-  return -1;
-}
-
-int _unlink(const char *a) {
-  (void) a;
-  return -1;
-}
-
-int _stat(const char *path, struct stat *st) {
-  (void) path, (void) st;
-  return -1;
-}
-
-int mkdir(const char *path, mode_t mode) {
-  (void) path, (void) mode;
-  return -1;
-}
-
-void _init(void) {}

examples/nxp/rt1020-evk-make-freertos-builtin/sysinit.c

@@ -1,82 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-//
-// This file contains essentials required by the CMSIS:
-// uint32_t SystemCoreClock - holds the system core clock value
-// SystemInit() - initialises the system, e.g. sets up clocks
-
-#include "hal.h"
-
-uint32_t SystemCoreClock = SYS_FREQUENCY;
-
-// - 14.4, Figure 14-2: clock tree
-// - 14.7.4: ARM_PODF defaults to /1
-// - 14.7.5: AHB_PODF defaults to /1; PERIPH_CLK_SEL defaults to derive clock
-// from pre_periph_clk_sel
-// - 14.7.6: PRE_PERIPH_CLK_SEL defaults to derive clock from PLL2 PFD3.
-// - (For 528MHz operation, we need to set it to derive clock from PLL2, but
-// this chip max is 500 MHz).
-// - 14.6.1.3.1 System PLL (PLL2); 13.3.2.2 PLLs; 14.6.1.4 Phase Fractional
-// Dividers (PFD)
-// - 14.8.2: PLL2 is powered off and bypassed to 24MHz
-// - 14.8.11: PFD defaults to 18/16 but Figure 14-2 shows half the value
-// ("divider")
-// - For 500MHz operation, we need to set PRE_PERIPH_CLK_SEL to derive clock
-// from divided PLL6
-// - 14.8.9: configure PLL6 to generate a 500MHz clock
-// - Datasheet 4.1.3: System frequency/Bus frequency max 500/125MHz respectively
-// (AHB/IPG)
-// - MCUXpresso: IPG_CLK_ROOT <= 125MHz; PERCLK_CLK_ROOT <= 62.5MHz
-// - Datasheet 4.8.4.1.1/2: the processor clock frequency must exceed twice the
-// ENET_RX_CLK/ENET_TX_CLK frequency.
-// - Datasheet 4.8.4.2: no details for RMII (above is for MII), assumed 50MHz
-// min processor clock
-// - Datasheet 4.1.3, Table 11: "Overdrive" run mode requires 1.25V core voltage
-// minimum
-void SystemInit(void) {  // Called automatically by startup code (ints masked)
-  SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2));  // Enable FPU
-  asm("DSB");
-  asm("ISB");
-  // 53.4.2: Disable watchdog after reset (unlocked)
-  RTWDOG->CS &= ~RTWDOG_CS_EN_MASK;
-  RTWDOG->TOVAL = 0xFFFF;
-  while (RTWDOG->CS & RTWDOG_CS_ULK_MASK) spin(1);  // wait for lock
-  while ((RTWDOG->CS & RTWDOG_CS_RCS_MASK) == 0)
-    spin(1);  // wait for new config
-  // Set VDD_SOC to 1.25V
-  SETBITS(DCDC->REG3, DCDC_REG3_TRG_MASK, DCDC_REG3_TRG(0x12));
-  while ((DCDC->REG0 & DCDC_REG0_STS_DC_OK_MASK) == 0)
-    spin(1);  // Wait for DCDC_STS_DC_OK
-  // 14.8.9 Init 500MHz reference, clock the M7 core with it, generate 50MHz for
-  // ENET and RMII.
-  SETBITS(CCM_ANALOG->PLL_ENET, CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC_MASK,
-          CCM_ANALOG_PLL_ENET_BYPASS_MASK |
-              CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC(0));  // bypass to 24MHz osc
-  SETBITS(
-      CCM_ANALOG->PLL_ENET,
-      CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK | CCM_ANALOG_PLL_ENET_POWERDOWN_MASK,
-      CCM_ANALOG_PLL_ENET_DIV_SELECT(1) | CCM_ANALOG_PLL_ENET_ENABLE_MASK |
-          CCM_ANALOG_PLL_ENET_ENET_500M_REF_EN_MASK);  // setup PLL
-  while ((CCM_ANALOG->PLL_ENET & CCM_ANALOG_PLL_ENET_LOCK_MASK) == 0)
-    spin(1);  // wait until it is stable
-  CCM_ANALOG->PLL_ENET &=
-      ~CCM_ANALOG_PLL_ENET_BYPASS_MASK;  // Disable Bypass (switch to PLL)
-  SETBITS(CCM->CBCDR, CCM_CBCDR_IPG_PODF_MASK,
-          CCM_CBCDR_IPG_PODF(3));  // Set IPG divider /4 (125MHz)
-  SETBITS(CCM->CSCMR1, CCM_CSCMR1_PERCLK_PODF_MASK,
-          CCM_CSCMR1_PERCLK_PODF(1));  // Set PERCLK divider /2 (62.5MHz)
-  SETBITS(CCM->CBCMR, CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK,
-          CCM_CBCMR_PRE_PERIPH_CLK_SEL(3));  // run from 500MHz clock
-  // 14.5 Table 14-4: uart_clk_root
-  // 14.4: uart_clk_root = PLL3/6 or OSC; CCM_CSCDR1 (14.7.9) defaults to
-  // PLL3/6/1; but ROM boot code fiddles with the divider (9.5.3 Table 9-7)
-  CCM_ANALOG->PLL_USB1 |= CCM_ANALOG_PLL_USB1_POWER_MASK;  // Power PLL on
-  while ((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_LOCK_MASK) == 0)
-    spin(1);  // wait until it is stable
-  CCM_ANALOG->PLL_USB1 &=
-      ~CCM_ANALOG_PLL_USB1_BYPASS_MASK;  // Disable Bypass (switch to PLL)
-  CCM->CSCDR1 &= ~(CCM_CSCDR1_UART_CLK_SEL_MASK | CCM_CSCDR1_UART_CLK_PODF_MASK);
-  rng_init();                            // Initialise random number generator
-  // NXP startup code calls SystemInit BEFORE initializing RAM...
-  SysTick_Config(SYS_FREQUENCY / 1000);  // Sys tick every 1ms
-}

examples/nxp/rt1060-evk-make-baremetal-builtin/Makefile

@@ -1,85 +1,29 @@
-CFLAGS  = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion
-CFLAGS += -Wformat-truncation -fno-common # -Wconversion is not SDK-friendly
-CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
-CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_mcu/devices/MIMXRT1062
-CFLAGS += -Icmsis_mcu/devices/MIMXRT1062/drivers -DCPU_MIMXRT1062DVL6B
-CFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA)
-LDSCRIPT = link.ld
-LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map 
+BOARD = rt1060
+IDE = GCC+make
+RTOS = baremetal
+WIZARD_URL ?= http://mongoose.ws/wizard
 
-SOURCES = main.c syscalls.c sysinit.c
-SOURCES += cmsis_mcu/devices/MIMXRT1062/gcc/startup_MIMXRT1062.S # NXP startup file. Compiler-dependent!
-CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS	# Make startup code work as expected
-
-# Mongoose options are defined in mongoose_config.h
-SOURCES += mongoose.c net.c packed_fs.c
-
-# Example specific build options. See README.md
-CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\" -DHTTPS_URL=\"https://0.0.0.0/\"
-
-ifeq ($(OS),Windows_NT)
-  RM = cmd /C del /Q /F /S
-else
-  RM = rm -rf
-endif
-
-all build example update: SOURCES += flash_image.c
 all build example: firmware.bin
 
-ram: LDSCRIPT = link_ram.ld
-ram: firmware.bin
+firmware.bin: wizard
+	make -C wizard CFLAGS_EXTRA=$(CFLAGS_EXTRA) && mv wizard/firmware.bin ./
 
-firmware.bin: firmware.elf
-	arm-none-eabi-objcopy -O binary $< $@
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard ; rm mongoose.[ch] ; ln -s ../../../../mongoose.c ; ln -s ../../../../mongoose.h
 
-firmware.elf: cmsis_core cmsis_mcu $(SOURCES) hal.h link_ram.ld link.ld Makefile
-	arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@
-	arm-none-eabi-size $@
-
-flash: firmware.bin
-# flash
-
-cmsis_core:     # ARM CMSIS core headers
-	git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
-cmsis_mcu:
-	curl -sL https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.MIMXRT1062_DFP.17.1.0.pack -o $@.zip
-	mkdir $@ && cd $@ && unzip -q ../$@.zip
-mbedtls:        # mbedTLS library
-	git clone --depth 1 -b v2.28.2 https://github.com/mbed-tls/mbedtls $@
-
-ifeq ($(TLS), mbedtls)
-CFLAGS += -DMG_TLS=MG_TLS_MBED -Wno-conversion -Imbedtls/include
-CFLAGS += -DMBEDTLS_CONFIG_FILE=\"mbedtls_config.h\" mbedtls/library/*.c
-firmware.elf: mbedtls
-endif
 
 # Automated remote test. Requires env variable VCON_API_KEY set. See https://vcon.io/automated-firmware-tests/
 DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/13
 update: firmware.bin
 	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
 
-update updateram: CFLAGS += -DUART_DEBUG=LPUART3
-
+test update: CFLAGS_EXTRA ="-DUART_DEBUG=LPUART3"
 test: update
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=15 | tee /tmp/output.txt
 	grep 'READY, IP:' /tmp/output.txt       # Check for network init
 
-
-updateram: ram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @firmware.bin
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0003 wm,e000edfc,1 wm,e000ed0c,5fa0004"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	PC=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,4"}' | jq -r .resp[5:]` && \
-	SP=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,0"}' | jq -r .resp[5:]` && \
-	REQ="wm,e000ed08,0 wr,d,$$SP wr,f,$$PC" && \
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"'"$$REQ"'"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0001"}'
-
-testram: updateram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
-	grep 'READY, IP:' /tmp/output.txt       # Check for network init
-
-
 clean:
-	$(RM) firmware.* *.su cmsis_core cmsis_mcu mbedtls *.zip
+	rm -rf firmware.* wizard*

examples/nxp/rt1060-evk-make-baremetal-builtin/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=rt1060&ide=GCC+make&rtos=baremetal&file=README.md)

examples/nxp/rt1060-evk-make-baremetal-builtin/dcd.h

@@ -1,95 +0,0 @@
-/*
- * Copyright 2020-2021 NXP
- * All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#define __DCD_DATA                                                            \
-  0xD2, 0x04, 0x10, 0x41, 0xCC, 0x03, 0x8C, 0x04, 0x40, 0x0F, 0xC0, 0x68,     \
-      0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0F, 0xC0, 0x6C, 0xFF, 0xFF, 0xFF, 0xFF, \
-      0x40, 0x0F, 0xC0, 0x70, 0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0F, 0xC0, 0x74, \
-      0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0F, 0xC0, 0x78, 0xFF, 0xFF, 0xFF, 0xFF, \
-      0x40, 0x0F, 0xC0, 0x7C, 0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0F, 0xC0, 0x80, \
-      0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x0D, 0x80, 0x30, 0x00, 0x00, 0x20, 0x01, \
-      0x40, 0x0D, 0x81, 0x00, 0x10, 0x1D, 0x10, 0x1B, 0x40, 0x0F, 0xC0, 0x14, \
-      0x00, 0x01, 0x0D, 0x40, 0x40, 0x1F, 0x80, 0x14, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x18, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x1C, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x20, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x24, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x28, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x2C, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x30, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x34, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x38, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x40, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x44, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x48, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x4C, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x50, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x54, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x58, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x5C, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x64, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x68, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x70, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x74, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x78, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x7C, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x84, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x88, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x8C, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x90, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x94, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0x98, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0x9C, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0xA0, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0xA4, 0x00, 0x00, 0x00, 0x00, \
-      0x40, 0x1F, 0x80, 0xA8, 0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0xAC, \
-      0x00, 0x00, 0x00, 0x00, 0x40, 0x1F, 0x80, 0xB0, 0x00, 0x00, 0x00, 0x10, \
-      0x40, 0x1F, 0x82, 0x04, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x08, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x0C, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x10, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x14, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x18, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x1C, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x20, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x24, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x28, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x2C, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x30, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x34, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x38, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x3C, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x40, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x44, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x48, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x4C, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x50, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x54, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x58, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x5C, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x60, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x64, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x68, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x6C, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x70, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x74, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x78, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x7C, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x80, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x84, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x88, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x8C, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x90, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0x94, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x98, \
-      0x00, 0x01, 0x10, 0xF9, 0x40, 0x1F, 0x82, 0x9C, 0x00, 0x01, 0x10, 0xF9, \
-      0x40, 0x1F, 0x82, 0xA0, 0x00, 0x01, 0x10, 0xF9, 0x40, 0x2F, 0x00, 0x00, \
-      0x10, 0x00, 0x00, 0x04, 0x40, 0x2F, 0x00, 0x08, 0x00, 0x00, 0x00, 0x81, \
-      0x40, 0x2F, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x81, 0x40, 0x2F, 0x00, 0x10, \
-      0x80, 0x00, 0x00, 0x1B, 0x40, 0x2F, 0x00, 0x14, 0x82, 0x00, 0x00, 0x1B, \
-      0x40, 0x2F, 0x00, 0x18, 0x84, 0x00, 0x00, 0x1B, 0x40, 0x2F, 0x00, 0x1C, \
-      0x86, 0x00, 0x00, 0x1B, 0x40, 0x2F, 0x00, 0x20, 0x90, 0x00, 0x00, 0x21, \
-      0x40, 0x2F, 0x00, 0x24, 0xA0, 0x00, 0x00, 0x19, 0x40, 0x2F, 0x00, 0x28, \
-      0xA8, 0x00, 0x00, 0x17, 0x40, 0x2F, 0x00, 0x2C, 0xA9, 0x00, 0x00, 0x1B, \
-      0x40, 0x2F, 0x00, 0x30, 0x00, 0x00, 0x00, 0x21, 0x40, 0x2F, 0x00, 0x04, \
-      0x00, 0x00, 0x79, 0xA8, 0x40, 0x2F, 0x00, 0x40, 0x00, 0x00, 0x0F, 0x31, \
-      0x40, 0x2F, 0x00, 0x44, 0x00, 0x65, 0x29, 0x22, 0x40, 0x2F, 0x00, 0x48, \
-      0x00, 0x01, 0x09, 0x20, 0x40, 0x2F, 0x00, 0x4C, 0x50, 0x21, 0x0A, 0x08, \
-      0x40, 0x2F, 0x00, 0x80, 0x00, 0x00, 0x00, 0x21, 0x40, 0x2F, 0x00, 0x84, \
-      0x00, 0x88, 0x88, 0x88, 0x40, 0x2F, 0x00, 0x94, 0x00, 0x00, 0x00, 0x02, \
-      0x40, 0x2F, 0x00, 0x98, 0x00, 0x00, 0x00, 0x00, 0x40, 0x2F, 0x00, 0x90, \
-      0x80, 0x00, 0x00, 0x00, 0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0F, \
-      0xCF, 0x00, 0x0C, 0x1C, 0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, \
-      0xCC, 0x00, 0x14, 0x04, 0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00, \
-      0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0C, 0xCF, 0x00, 0x0C, 0x1C, \
-      0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, 0xCC, 0x00, 0x14, 0x04, \
-      0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00, 0x40, 0x2F, 0x00, 0x9C, \
-      0xA5, 0x5A, 0x00, 0x0C, 0xCF, 0x00, 0x0C, 0x1C, 0x40, 0x2F, 0x00, 0x3C, \
-      0x00, 0x00, 0x00, 0x01, 0xCC, 0x00, 0x1C, 0x04, 0x40, 0x2F, 0x00, 0xA0, \
-      0x00, 0x00, 0x00, 0x33, 0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00, \
-      0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0A, 0xCF, 0x00, 0x0C, 0x1C, \
-      0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, 0xCC, 0x00, 0x0C, 0x04, \
-      0x40, 0x2F, 0x00, 0x4C, 0x50, 0x21, 0x0A, 0x09

examples/nxp/rt1060-evk-make-baremetal-builtin/flash_image.c

@@ -1,61 +0,0 @@
-#include "dcd.h"      // pin settings for MIMXRT1060-EVKB board
-#include "fsl_flexspi.h"  // peripheral structures
-#include "fsl_romapi.h"   // peripheral structures
-#include "hal.h"
-
-extern uint32_t __isr_vector[];
-
-// RM 9.7.2
-__attribute__((section(".dcd"), used))
-const uint8_t __ivt_dcd_data[] = {__DCD_DATA};
-
-// RM 9.7.1
-__attribute__((section(".dat"), used)) const uint32_t __ivt_boot_data[] = {
-    FlexSPI_AMBA_BASE,  // boot start location
-    8 * 1024 * 1024,    // size
-    0,                  // Plugin flag
-    0Xffffffff          // empty - extra data word
-};
-
-__attribute__((section(".ivt"), used)) const uint32_t __ivt[8] = {
-    0x412000d1,                  // header: 41 - version, 2000 size, d1 tag
-    (uint32_t) __isr_vector,     // entry
-    0,                           // reserved
-    (uint32_t) __ivt_dcd_data,   // dcd
-    (uint32_t) __ivt_boot_data,  // boot data
-    (uint32_t) __ivt,            // this is us - ivt absolute address
-    0,                           // csf absolute address
-    0,                           // reserved for HAB
-};
-
-#define __FLEXSPI_QSPI_LUT { \
-                    [0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), \
-                    [1] = FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),\
-                    [4 * 1 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x04),\
-                    [4 * 3 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0x0),\
-                    [4 * 5 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 0x18),\
-                    [4 * 8 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8, RADDR_SDR, FLEXSPI_1PAD, 0x18),\
-                    [4 * 9 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 0x18),\
-                    [4 * 9 + 1] = FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0),\
-                    [4 * 11 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0x0),\
-}
-
-// MIMXRT1060-EVKB flash chip config: IS25WP064AJBLE
-__attribute__((section(".cfg"), used))
-const flexspi_nor_config_t __qspi_flash_cfg = {
-    .memConfig = {.tag = FLEXSPI_CFG_BLK_TAG,
-                  .version = FLEXSPI_CFG_BLK_VERSION,
-                  .readSampleClkSrc = 1,  // ReadSampleClk_LoopbackFromDqsPad
-                  .csHoldTime = 3,
-                  .csSetupTime = 3,
-                  .controllerMiscOption = BIT(4),
-                  .deviceType = 1,  // serial NOR
-                  .sflashPadType = 4,
-                  .serialClkFreq = 7,  // 120MHz
-                  .sflashA1Size = 8 * 1024 * 1024,
-                  .lookupTable = __FLEXSPI_QSPI_LUT},
-    .pageSize = 256,
-    .sectorSize = 4 * 1024,
-    .ipcmdSerialClkFreq = 1,
-    .blockSize = 64 * 1024,
-    .isUniformBlockSize = false};

examples/nxp/rt1060-evk-make-baremetal-builtin/hal.h

@@ -1,356 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-// https://cache.nxp.com/secured/assets/documents/en/reference-manual/IMXRT1060XRM.pdf
-// https://cache.nxp.com/secured/assets/documents/en/user-guide/MIMXRT1060EVKBUM.pdf
-
-#pragma once
-
-#include "MIMXRT1062.h"
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <string.h>
-
-#define BIT(x) (1UL << (x))
-#define SETBITS(R, CLEARMASK, SETMASK) (R) = ((R) & ~(CLEARMASK)) | (SETMASK)
-#define PIN(bank, num) ((((bank) - '0') << 8) | (num))
-#define PINNO(pin) (pin & 255)
-#define PINBANK(pin) (pin >> 8)
-
-// Use LED for blinking, D8: GPIO_AD_B0_08. GPIO1.8 (schematics, RM)
-#define LED PIN('1', 8)
-
-#ifndef UART_DEBUG
-#define UART_DEBUG LPUART1
-#endif
-
-// No settable constants, see sysinit.c
-#define SYS_FREQUENCY 600000000UL
-
-static inline void spin(volatile uint32_t count) {
-  while (count--) (void) 0;
-}
-
-enum { CLOCK_OFF = 0U, CLOCK_ON_RUN = 1U, CLOCK_ON_RUN_WAIT = 3U };
-static inline void clock_periph(uint32_t index, uint32_t shift, uint32_t val) {
-  volatile uint32_t *r = &CCM->CCGR0;
-  SETBITS(r[index], 3UL << shift, val << shift);
-}
-
-// which peripheral feeds the pin
-static inline void gpio_mux_config(uint16_t index, uint8_t af) {
-  IOMUXC->SW_MUX_CTL_PAD[index] = af;
-}
-
-// which pin feeds the peripheral (2nd stage)
-static inline void periph_mux_config(uint16_t index, uint8_t in) {
-  IOMUXC->SELECT_INPUT[index] = in;
-}
-
-enum { GPIO_MODE_INPUT, GPIO_MODE_OUTPUT };
-enum { GPIO_OTYPE_PUSH_PULL, GPIO_OTYPE_OPEN_DRAIN };
-enum { GPIO_SPEED_LOW, GPIO_SPEED_MEDIUM, GPIO_SPEED_MEDIUM_, GPIO_SPEED_HIGH };
-enum { GPIO_PULL_NONE, GPIO_PULL_DOWN, GPIO_PULL_UP };
-static inline GPIO_Type *gpio_bank(uint16_t pin) {
-  static const GPIO_Type *g[] = {NULL, GPIO1, GPIO2, GPIO3, NULL, GPIO5};
-  return (GPIO_Type *) g[PINBANK(pin)];
-}
-
-// pin driver/pull-up/down configuration (ignore "keeper")
-static inline void gpio_pad_config(uint16_t index, uint8_t type, uint8_t speed,
-                                   uint8_t pull) {
-  bool dopull = pull > 0;
-  if (dopull) --pull;
-  IOMUXC->SW_PAD_CTL_PAD[index] =
-      IOMUXC_SW_PAD_CTL_PAD_SPEED(speed) | IOMUXC_SW_PAD_CTL_PAD_ODE(type) |
-      IOMUXC_SW_PAD_CTL_PAD_SRE(speed >= GPIO_SPEED_HIGH) |
-      IOMUXC_SW_PAD_CTL_PAD_PUE(1) | IOMUXC_SW_PAD_CTL_PAD_PKE(dopull) |
-      IOMUXC_SW_PAD_CTL_PAD_PUS(pull) | IOMUXC_SW_PAD_CTL_PAD_DSE(7);
-}
-
-static inline void gpio_init(uint16_t pin, uint8_t mode, uint8_t type,
-                             uint8_t speed, uint8_t pull) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint8_t bit = (uint8_t) PINNO(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  switch (PINBANK(pin)) {
-    case 1:
-      gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_00 + bit, 5);
-      gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_00 + bit, type, speed,
-                      pull);
-      clock_periph(1, CCM_CCGR1_CG13_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 2:
-      gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00 + bit, 5);
-      gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_00 + bit, type, speed,
-                      pull);
-      clock_periph(0, CCM_CCGR0_CG15_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 3:
-      gpio_mux_config(bit < 12 ? kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_00 + bit
-                      : bit < 18
-                          ? kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00 + bit - 12
-                          : kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32 + bit - 18,
-                      5);
-      gpio_pad_config(bit < 12 ? kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_00 + bit
-                      : bit < 18
-                          ? kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B0_00 + bit - 12
-                          : kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_32 + bit - 18,
-                      type, speed, pull);
-      clock_periph(2, CCM_CCGR2_CG13_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 5:
-      // TODO(): support sw_mux
-      clock_periph(1, CCM_CCGR1_CG15_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    default:
-      break;
-  }
-
-  gpio->IMR &= ~mask;
-  if (mode == GPIO_MODE_INPUT) {
-    gpio->GDIR &= ~mask;
-  } else {
-    gpio->GDIR |= mask;
-  }
-}
-static inline void gpio_input(uint16_t pin) {
-  gpio_init(pin, GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_NONE);
-}
-static inline void gpio_output(uint16_t pin) {
-  gpio_init(pin, GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_NONE);
-}
-
-static inline bool gpio_read(uint16_t pin) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-  return gpio->DR & mask;
-}
-static inline void gpio_write(uint16_t pin, bool value) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-  if (value) {
-    gpio->DR |= mask;
-  } else {
-    gpio->DR &= ~mask;
-  }
-}
-static inline void gpio_toggle(uint16_t pin) {
-  gpio_write(pin, !gpio_read(pin));
-}
-
-// 14.5 Table 14-4: uart_clk_root
-// see sysinit.c for clocks, (14.7.9: defaults to pll3_80m = PLL3/6/1 = 80MHz)
-static inline void uart_init(LPUART_Type *uart, unsigned long baud) {
-  uint8_t af = 2;                           // Alternate function
-  uint16_t mr = 0, pr = 0, mt = 0, pt = 0;  // pins
-  uint32_t freq = 80000000;                 // uart_clk_root frequency
-  if (uart == LPUART1)
-    mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12,
-    pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_12,
-    mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13,
-    pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_13;
-  if (uart == LPUART3)
-    mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06,
-    pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_06,
-    mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07,
-    pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_07;
-
-  if (uart == LPUART1) clock_periph(5, CCM_CCGR5_CG12_SHIFT, CLOCK_ON_RUN_WAIT);
-  if (uart == LPUART3) clock_periph(0, CCM_CCGR0_CG6_SHIFT, CLOCK_ON_RUN_WAIT);
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  gpio_mux_config(mt, af);
-  gpio_pad_config(pt, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-  gpio_mux_config(mr, af);
-  gpio_pad_config(pr, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-
-  uart->GLOBAL |= LPUART_GLOBAL_RST_MASK;  // reset, CTRL = 0, defaults
-  uart->GLOBAL &= ~LPUART_GLOBAL_RST_MASK;
-  SETBITS(uart->BAUD,
-          LPUART_BAUD_OSR_MASK | LPUART_BAUD_SBR_MASK | LPUART_BAUD_SBNS_MASK,
-          LPUART_BAUD_OSR(16 - 1) |
-              LPUART_BAUD_SBR(freq / (16 * baud)));  // Rx sample at 16x
-  SETBITS(uart->CTRL,
-          LPUART_CTRL_PE_MASK | LPUART_CTRL_M_MASK | LPUART_CTRL_ILT_MASK |
-              LPUART_CTRL_IDLECFG_MASK,
-          LPUART_CTRL_IDLECFG(1) | LPUART_CTRL_ILT(1) |
-              LPUART_BAUD_SBNS(0));  // no parity, idle 2 chars after 1 stop bit
-  uart->CTRL |= LPUART_CTRL_TE_MASK | LPUART_CTRL_RE_MASK;
-}
-
-static inline void uart_write_byte(LPUART_Type *uart, uint8_t byte) {
-  uart->DATA = byte;
-  while ((uart->STAT & LPUART_STAT_TDRE_MASK) == 0) spin(1);
-}
-static inline void uart_write_buf(LPUART_Type *uart, char *buf, size_t len) {
-  while (len-- > 0) uart_write_byte(uart, *(uint8_t *) buf++);
-}
-static inline int uart_read_ready(LPUART_Type *uart) {
-  (void) uart;
-  return uart->STAT & LPUART_STAT_RDRF_MASK;
-}
-static inline uint8_t uart_read_byte(LPUART_Type *uart) {
-  return (uint8_t) (uart->DATA & 255);
-}
-
-static inline void rng_init(void) {
-  clock_periph(6, CCM_CCGR6_CG6_SHIFT, CLOCK_ON_RUN_WAIT);  // trng_clk
-  SETBITS(TRNG->MCTL,
-          TRNG_MCTL_PRGM_MASK | TRNG_MCTL_ERR_MASK | TRNG_MCTL_RST_DEF_MASK,
-          TRNG_MCTL_PRGM(1) | TRNG_MCTL_ERR(1) |
-              TRNG_MCTL_RST_DEF(1));  // reset to default values
-  SETBITS(TRNG->MCTL, TRNG_MCTL_PRGM_MASK | TRNG_MCTL_ERR_MASK,
-          TRNG_MCTL_PRGM(0));            // set to run mode
-  (void) TRNG->ENT[TRNG_ENT_COUNT - 1];  // start new entropy generation
-  (void) TRNG->ENT[0];                   // defect workaround
-}
-static inline uint32_t rng_read(void) {
-  static uint8_t idx = 0;
-  while ((TRNG->MCTL & TRNG_MCTL_ENT_VAL_MASK) == 0) (void) 0;
-  uint32_t data = TRNG->ENT[idx++];  // read data
-  idx %= TRNG_ENT_COUNT;             // stay within array limits
-  if (idx == 0)                      // we've just read TRNG_ENT_COUNT - 1
-    (void) TRNG->ENT[0];             // defect workaround
-  return data;
-}
-
-// - PHY has no xtal, XI driven from ENET_REF_CLK1 (labeled as ENET_TX_REF_CLK
-// (GPIO_AD_B1_10)), generated by the MCU
-// - PHY RST connected to GPIO1.9 (GPIO_AD_B0_09); INTRP/NAND_TREE connected to
-// GPIO1.10 (GPIO_AD_B0_10)
-// - 41.4 REF_CLK1 is RMII mode reference clock for Rx, Tx, and SMI; it is I/O
-// - 11.3.2 IOMUXC_GPR_GPR1
-//   - bit 13: ENET1_CLK_SEL --> 0 ENET1 TX reference clock driven by
-//   ref_enetpll and output via ENET_REF_CLK1 (labeled as ENET_REF_CLK
-//   elsewhere)
-//   - bit 17: ENET1_TX_CLK_DIR --> 1 ENET1_TX_CLK output driver enabled
-// - 14.6.1.3.6 Ethernet PLL (PLL6)
-// - 14.8.14: configure PLL6 to generate 50MHz clocks for ENET and RMII.
-static inline void ethernet_init(void) {
-  // setup PLL and clock ENET from it
-  SETBITS(CCM_ANALOG->PLL_ENET, CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC_MASK,
-          CCM_ANALOG_PLL_ENET_BYPASS_MASK |
-              CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC(0));  // bypass to 24MHz osc
-  SETBITS(
-      CCM_ANALOG->PLL_ENET,
-      CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK | CCM_ANALOG_PLL_ENET_POWERDOWN_MASK,
-      CCM_ANALOG_PLL_ENET_DIV_SELECT(1) | CCM_ANALOG_PLL_ENET_ENABLE_MASK);
-  while ((CCM_ANALOG->PLL_ENET & CCM_ANALOG_PLL_ENET_LOCK_MASK) == 0)
-    spin(1);  // wait until it is stable
-  CCM_ANALOG->PLL_ENET &= ~CCM_ANALOG_PLL_ENET_BYPASS_MASK;
-
-  gpio_init(PIN('1', 9), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL,
-            GPIO_SPEED_MEDIUM, GPIO_PULL_UP);  // set GPIO1.9 as GPIO (PHY \RST)
-  gpio_write(PIN('1', 9), 0);                  // reset PHY
-
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_10,
-                  6);  // set for ENET_REF_CLK
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_10] |=
-      IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_ENET_IPG_CLK_RMII_SELECT_INPUT,
-                    1);  // drive peripheral from B1_10, so RMII clock is taken
-                         // from ENET_REF_CLK
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_10, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  IOMUXC_GPR->GPR1 |=
-      IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR(1);  // Set ENET_TX_CLK as output
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_04, 3);  // set for RXDATA0
-  periph_mux_config(kIOMUXC_ENET0_RXDATA_SELECT_INPUT,
-                    1);  // drive peripheral from B1_04
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_04, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_05, 3);  // set for RXDATA1
-  periph_mux_config(kIOMUXC_ENET1_RXDATA_SELECT_INPUT,
-                    1);  // drive peripheral from B1_05
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_05, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_06, 3);  // set for CRS
-  periph_mux_config(kIOMUXC_ENET_RXEN_SELECT_INPUT,
-                    1);  // drive peripheral from B1_06
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_06, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_07, 3);  // set for TXDATA0
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_07, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_08, 3);  // set for TXDATA1
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_08, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_09, 3);  // set for TXEN
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_09, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_11, 3);  // set for RXERR
-  periph_mux_config(kIOMUXC_ENET_RXERR_SELECT_INPUT,
-                    1);  // drive peripheral from B0_12
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_11, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_40, 4);  // set for MDC
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_40, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_41, 4);  // set for MDIO
-  periph_mux_config(kIOMUXC_ENET_MDIO_SELECT_INPUT,
-                    1);  // drive peripheral from EMC_41
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_41, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-
-  gpio_init(PIN('1', 10), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL,
-            GPIO_SPEED_MEDIUM,
-            GPIO_PULL_UP);      // set GPIO1.10 as GPIO (PHY INTRP/NAND_TREE)
-  gpio_write(PIN('1', 10), 1);  // prevent NAND_TREE
-  spin(10000);                  // keep PHY RST low for a while
-  gpio_write(PIN('1', 9), 1);   // deassert RST
-  gpio_init(PIN('1', 10), GPIO_MODE_INPUT, 0, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_UP);  // setup IRQ (pulled-up)(not used)
-
-  clock_periph(1, CCM_CCGR1_CG5_SHIFT, CLOCK_ON_RUN_WAIT);  // enet_ipg_clk
-  NVIC_EnableIRQ(ENET_IRQn);  // Setup Ethernet IRQ handler
-}
-
-// Helper macro for MAC generation, byte reads not allowed
-#define GENERATE_LOCALLY_ADMINISTERED_MAC()                \
-  {                                                        \
-    2, OCOTP->CFG0 & 255, (OCOTP->CFG0 >> 10) & 255,       \
-        ((OCOTP->CFG0 >> 19) ^ (OCOTP->CFG1 >> 19)) & 255, \
-        (OCOTP->CFG1 >> 10) & 255, OCOTP->CFG1 & 255       \
-  }
-// NOTE: You can fuse your own MAC and read it from OCOTP->MAC0, OCOTP->MAC1,
-// OCOTP->MAC2
-
-static inline void flash_init(void) { // QSPI in FlexSPI
-  // set pins
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05, 1);  // set for DQS
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DQS_SELECT_INPUT, 0);  // drive peripheral from B1_05
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_05, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06, 1);  // set for SS
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_06, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07, 1);  // set for SCLK
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_SCK_SELECT_INPUT, 0);  // drive peripheral from B1_07
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_07, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08, 1);  // set for DATA0
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DATA0_SELECT_INPUT, 0);  // drive peripheral from B1_08
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_08, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09, 1);  // set for DATA1
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DATA1_SELECT_INPUT, 0);  // drive peripheral from B1_09
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_09, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10, 1);  // set for DATA2
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DATA2_SELECT_INPUT, 0);  // drive peripheral from B1_10
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_10, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11, 1);  // set for DATA3
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DATA3_SELECT_INPUT, 0);  // drive peripheral from B1_11
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_11, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  // set FlexSPI clock
-  SETBITS(CCM->CSCMR1, CCM_CSCMR1_FLEXSPI_CLK_SEL_MASK | CCM_CSCMR1_FLEXSPI_PODF_MASK, CCM_CSCMR1_FLEXSPI_CLK_SEL(3) | CCM_CSCMR1_FLEXSPI_PODF(7));  // select PLL3 PFD0 /8
-  clock_periph(6, CCM_CCGR6_CG5_SHIFT, CLOCK_ON_RUN_WAIT);  // enable
-}

examples/nxp/rt1060-evk-make-baremetal-builtin/link.ld

@@ -1,24 +0,0 @@
-ENTRY(Reset_Handler);
-MEMORY {
-  flash_hdr(rx)  : ORIGIN = 0x60000000, LENGTH = 8k
-  flash_irq(rx)  : ORIGIN = 0x60002000, LENGTH = 1k
-  flash_code(rx) : ORIGIN = 0x60002400, LENGTH = 8183k
-
-  itcram(rx)       : ORIGIN = 0x00000000, LENGTH = 128k
-  dtcram(rw)       : ORIGIN = 0x20000000, LENGTH = 128k
-  ocram(rw)        : ORIGIN = 0x20200000, LENGTH = 256k   /* Is this cached ? */
-}
-__StackTop = ORIGIN(dtcram) + LENGTH(dtcram);
-
-/* TODO(): separate itcram and go back to using dtcram for data and bss when ota is finished */
-
-SECTIONS {
-  .hdr  : { FILL(0xff) ; KEEP(*(.cfg)) . = 0x1000 ; KEEP(*(.ivt)) . = 0x1020 ;
-            KEEP(*(.dat)) . = 0x1030 ; KEEP(*(.dcd)) . = 0x2000 ;} >flash_hdr
-  .irq  : { KEEP(*(.isr_vector)) }  > flash_irq
-  .text : { *(.text* .text.*) *(.rodata*) ; } > flash_code
-  .data : { __data_start__ = .; *(.data SORT(.data.*)) *(.iram) __data_end__ = .; } > itcram AT > flash_code
-  __etext = LOADADDR(.data);
-  .bss  : { __bss_start__ = .; *(.bss SORT(.bss.*) COMMON) __bss_end__ = .; } > itcram
-  _end = .;
-}

examples/nxp/rt1060-evk-make-baremetal-builtin/main.c

@@ -1,70 +0,0 @@
-// Copyright (c) 2022-2023 Cesanta Software Limited
-// All rights reserved
-
-#include "hal.h"
-#include "mongoose.h"
-#include "net.h"
-
-#define BLINK_PERIOD_MS 1000  // LED blinking period in millis
-
-static volatile uint64_t s_ticks;  // Milliseconds since boot
-void SysTick_Handler(void) {       // SyStick IRQ handler, triggered every 1ms
-  s_ticks++;
-}
-
-uint64_t mg_millis(void) {  // Let Mongoose use our uptime function
-  return s_ticks;           // Return number of milliseconds since boot
-}
-
-void mg_random(void *buf, size_t len) {  // Use on-board RNG
-  for (size_t n = 0; n < len; n += sizeof(uint32_t)) {
-    uint32_t r = rng_read();
-    memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r));
-  }
-}
-static void timer_fn(void *arg) {
-  gpio_toggle(LED);                                      // Blink LED
-  struct mg_tcpip_if *ifp = arg;                         // And show
-  const char *names[] = {"down", "up", "req", "ready"};  // network stats
-  MG_INFO(("Ethernet: %s, IP: %M, rx:%u, tx:%u, dr:%u, er:%u",
-           names[ifp->state], mg_print_ip4, &ifp->ip, ifp->nrecv, ifp->nsent,
-           ifp->ndrop, ifp->nerr));
-}
-
-int main(void) {
-  gpio_output(LED);               // Setup blue LED
-  uart_init(UART_DEBUG, 115200);  // Initialise debug printf
-  ethernet_init();                // Initialise ethernet pins
-  MG_INFO(("Starting, CPU freq %g MHz", (double) SystemCoreClock / 1000000));
-
-  struct mg_mgr mgr;        // Initialise
-  mg_mgr_init(&mgr);        // Mongoose event manager
-  mg_log_set(MG_LL_DEBUG);  // Set log level
-
-  // Initialise Mongoose network stack
-  struct mg_tcpip_driver_imxrt_data driver_data = {.mdc_cr = 24, .phy_addr = 2};
-  struct mg_tcpip_if mif = {.mac = GENERATE_LOCALLY_ADMINISTERED_MAC(),
-                            // Uncomment below for static configuration:
-                            // .ip = mg_htonl(MG_U32(192, 168, 0, 223)),
-                            // .mask = mg_htonl(MG_U32(255, 255, 255, 0)),
-                            // .gw = mg_htonl(MG_U32(192, 168, 0, 1)),
-                            .driver = &mg_tcpip_driver_imxrt,
-                            .driver_data = &driver_data};
-  mg_tcpip_init(&mgr, &mif);
-  mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mif);
-
-  MG_INFO(("MAC: %M. Waiting for IP...", mg_print_mac, mif.mac));
-  while (mif.state != MG_TCPIP_STATE_READY) {
-    mg_mgr_poll(&mgr, 0);
-  }
-
-  MG_INFO(("Initialising application..."));
-  web_init(&mgr);
-
-  MG_INFO(("Starting event loop"));
-  for (;;) {
-    mg_mgr_poll(&mgr, 0);
-  }
-
-  return 0;
-}

examples/nxp/rt1060-evk-make-baremetal-builtin/mongoose_config.h

@@ -1,14 +0,0 @@
-#pragma once
-
-// See https://mongoose.ws/documentation/#build-options
-#define MG_ARCH MG_ARCH_NEWLIB
-#define MG_OTA MG_OTA_FLASH
-#define MG_DEVICE MG_DEVICE_RT1060
-
-#define MG_ENABLE_TCPIP 1
-#define MG_ENABLE_DRIVER_IMXRT 1
-#define MG_IO_SIZE 256
-#define MG_ENABLE_CUSTOM_MILLIS 1
-#define MG_ENABLE_CUSTOM_RANDOM 1
-#define MG_ENABLE_PACKED_FS 1
-

examples/nxp/rt1060-evk-make-baremetal-builtin/net.c

@@ -1 +0,0 @@
-../../device-dashboard/net.c

examples/nxp/rt1060-evk-make-baremetal-builtin/net.h

@@ -1 +0,0 @@
-../../device-dashboard/net.h

examples/nxp/rt1060-evk-make-baremetal-builtin/packed_fs.c

@@ -1 +0,0 @@
-../../device-dashboard/packed_fs.c

examples/nxp/rt1060-evk-make-baremetal-builtin/syscalls.c

@@ -1,98 +0,0 @@
-#include <sys/stat.h>
-
-#include "hal.h"
-
-int _fstat(int fd, struct stat *st) {
-  if (fd < 0) return -1;
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-void *_sbrk(int incr) {
-  extern char _end;
-  static unsigned char *heap = NULL;
-  unsigned char *prev_heap;
-  unsigned char x = 0, *heap_end = (unsigned char *)((size_t) &x - 512);
-  (void) x;
-  if (heap == NULL) heap = (unsigned char *) &_end;
-  prev_heap = heap;
-  if (heap + incr > heap_end) return (void *) -1;
-  heap += incr;
-  return prev_heap;
-}
-
-int _open(const char *path) {
-  (void) path;
-  return -1;
-}
-
-int _close(int fd) {
-  (void) fd;
-  return -1;
-}
-
-int _isatty(int fd) {
-  (void) fd;
-  return 1;
-}
-
-int _lseek(int fd, int ptr, int dir) {
-  (void) fd, (void) ptr, (void) dir;
-  return 0;
-}
-
-void _exit(int status) {
-  (void) status;
-  for (;;) asm volatile("BKPT #0");
-}
-
-void _kill(int pid, int sig) {
-  (void) pid, (void) sig;
-}
-
-int _getpid(void) {
-  return -1;
-}
-
-int _write(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  if (fd == 1) uart_write_buf(UART_DEBUG, ptr, (size_t) len);
-  return -1;
-}
-
-int _read(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  return -1;
-}
-
-int _link(const char *a, const char *b) {
-  (void) a, (void) b;
-  return -1;
-}
-
-int _unlink(const char *a) {
-  (void) a;
-  return -1;
-}
-
-int _stat(const char *path, struct stat *st) {
-  (void) path, (void) st;
-  return -1;
-}
-
-int mkdir(const char *path, mode_t mode) {
-  (void) path, (void) mode;
-  return -1;
-}
-
-void _init(void) {}
-
-extern uint64_t mg_now(void);
-
-int _gettimeofday(struct timeval *tv, void *tz) {
-  uint64_t now = mg_now();
-  (void) tz;
-  tv->tv_sec = (time_t) (now / 1000);
-  tv->tv_usec = (unsigned long) ((now % 1000) * 1000);
-  return 0;
-}

examples/nxp/rt1060-evk-make-baremetal-builtin/sysinit.c

@@ -1,79 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-//
-// This file contains essentials required by the CMSIS:
-// uint32_t SystemCoreClock - holds the system core clock value
-// SystemInit() - initialises the system, e.g. sets up clocks
-
-#include "hal.h"
-
-uint32_t SystemCoreClock = SYS_FREQUENCY;
-
-// - 14.4, Figure 14-2: clock tree
-// - 14.7.4: ARM_PODF defaults to /2; 9.5.3 Table 9-7: ROM agrees
-// - 14.7.5: AHB_PODF defaults to /1; IPG_PODF defaults to /4; PERIPH_CLK_SEL
-// defaults to derive clock from pre_periph_clk_sel
-//   - 9.5.3 Table 9-7: ROM changes IPG_PODF to /3
-// - 14.7.6: PRE_PERIPH_CLK_SEL defaults to derive clock from divided
-// PLL1; 9.5.3 Table 9-7: ROM agrees
-// - (For 528MHz operation, we need to set it to derive clock from PLL2)
-// - 14.7.7: PER_CLK defaults to IPG/1; 9.5.3 Table 9-7: ROM changes it to IPG/2
-// - 14.6.1.3.1 ARM PLL (PLL1); 13.3.2.2 PLLs
-// - 14.8.1: PLL1 is powered off and bypassed to 24MHz. Fout = 24MHz *
-// div_select/2
-//   - 9.5.3 Table 9-7: ROM enables this PLL and sets it up
-// - For 600MHz operation, we need to set PLL1 on
-// - Datasheet 4.1.3: System frequency/Bus frequency max 600/150MHz respectively
-// (AHB/IPG)
-// - MCUXpresso: IPG_CLK_ROOT <= 150MHz; PERCLK_CLK_ROOT <= 75MHz
-// - Datasheet 4.9.4.1.1/2: the processor clock frequency must exceed twice the
-// ENET_RX_CLK/ENET_TX_CLK frequency.
-// - Datasheet 4.9.4.2: no details for RMII (above is for MII), assumed 50MHz
-// min processor clock
-// - Datasheet 4.1.3, Table 10: "Overdrive" run mode requires 1.25V core voltage
-// minimum; 528 MHz does not.
-void SystemInit(void) {  // Called automatically by startup code (ints masked)
-  SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2));  // Enable FPU
-  asm("DSB");
-  asm("ISB");
-  // 58.4.2: Disable watchdog after reset (unlocked)
-  RTWDOG->CS &= ~RTWDOG_CS_EN_MASK;
-  RTWDOG->TOVAL = 0xFFFF;
-  while (RTWDOG->CS & RTWDOG_CS_ULK_MASK) spin(1);  // wait for lock
-  while ((RTWDOG->CS & RTWDOG_CS_RCS_MASK) == 0)
-    spin(1);  // wait for new config
-  // Set VDD_SOC to 1.25V
-  SETBITS(DCDC->REG3, DCDC_REG3_TRG_MASK, DCDC_REG3_TRG(0x12));
-  while ((DCDC->REG0 & DCDC_REG0_STS_DC_OK_MASK) == 0)
-    spin(1);  // Wait for DCDC_STS_DC_OK
-  // ROM fiddles with AHB divider, wait and then keep bits at 0 (expected)
-  while (CCM->CDHIPR & CCM_CDHIPR_AHB_PODF_BUSY_MASK) spin(1);
-  SETBITS(CCM->CBCDR, CCM_CBCDR_IPG_PODF_MASK | CCM_CBCDR_AHB_PODF_MASK,
-          CCM_CBCDR_IPG_PODF(3)); // keep AHB, set IPG divider /4 (150MHz)
-  SETBITS(CCM->CSCMR1, CCM_CSCMR1_PERCLK_PODF_MASK,
-          CCM_CSCMR1_PERCLK_PODF(1));  // Set PERCLK divider /2 (75MHz)
-  // Set clock to 600 MHz. Power PLL on and configure divider (ROM boot code
-  // fiddles with the PLL, bypass first)
-  CCM_ANALOG->PLL_ARM |= CCM_ANALOG_PLL_ARM_BYPASS_MASK;
-  SETBITS(CCM_ANALOG->PLL_ARM,
-          CCM_ANALOG_PLL_ARM_POWERDOWN_MASK |
-              CCM_ANALOG_PLL_ARM_SET_DIV_SELECT_MASK,
-          CCM_ANALOG_PLL_ARM_SET_DIV_SELECT(100));
-  while ((CCM_ANALOG->PLL_ARM & CCM_ANALOG_PLL_ARM_LOCK_MASK) == 0)
-    spin(1);  // wait until it is stable
-  CCM_ANALOG->PLL_ARM &=
-      ~CCM_ANALOG_PLL_ARM_BYPASS_MASK;  // Disable Bypass (switch to PLL)
-  // 14.5 Table 14-4: uart_clk_root
-  // 14.4: uart_clk_root = PLL3/6 or OSC; CCM_CSCDR1 (14.7.9) defaults to
-  // PLL3/6/1; but ROM boot code fiddles with the divider (9.5.3 Table 9-7)
-  CCM_ANALOG->PLL_USB1 |= CCM_ANALOG_PLL_USB1_POWER_MASK;  // Power PLL on
-  while ((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_LOCK_MASK) == 0)
-    spin(1);  // wait until it is stable
-  CCM_ANALOG->PLL_USB1 &=
-      ~CCM_ANALOG_PLL_USB1_BYPASS_MASK;  // Disable Bypass (switch to PLL)
-  CCM->CSCDR1 &=
-      ~(CCM_CSCDR1_UART_CLK_SEL_MASK | CCM_CSCDR1_UART_CLK_PODF_MASK);
-  rng_init();  // Initialise random number generator
-  // NXP startup code calls SystemInit BEFORE initializing RAM...
-  SysTick_Config(SYS_FREQUENCY / 1000);  // Sys tick every 1ms
-}

examples/nxp/rt1060-evk-make-freertos-builtin/FreeRTOSConfig.h

@@ -1,38 +0,0 @@
-#pragma once
-
-#include "hal.h"
-
-#define configUSE_PREEMPTION 1
-#define configCPU_CLOCK_HZ SYS_FREQUENCY
-#define configTICK_RATE_HZ 1000
-#define configMAX_PRIORITIES 5
-#define configUSE_16_BIT_TICKS 0
-#define configUSE_TICK_HOOK 0
-#define configUSE_IDLE_HOOK 0
-#define configUSE_TIMERS 0
-#define configUSE_CO_ROUTINES 0
-#define configUSE_MALLOC_FAILED_HOOK 0
-#define configMINIMAL_STACK_SIZE 128
-#define configTOTAL_HEAP_SIZE (1024 * 32)
-#define INCLUDE_vTaskDelay 1
-#define INCLUDE_xTaskGetSchedulerState 1  // trying
-
-#ifdef __NVIC_PRIO_BITS
-#define configPRIO_BITS __NVIC_PRIO_BITS
-#else
-#define configPRIO_BITS 4
-#endif
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 15
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
-#define configKERNEL_INTERRUPT_PRIORITY \
-  (configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
-
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY \
-  (configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
-
-#define configASSERT(expr) \
-  if (!(expr)) printf("FAILURE %s:%d: %s\n", __FILE__, __LINE__, #expr)
-
-#define vPortSVCHandler SVC_Handler
-#define xPortPendSVHandler PendSV_Handler
-//#define xPortSysTickHandler SysTick_Handler

examples/nxp/rt1060-evk-make-freertos-builtin/Makefile

@@ -1,84 +1,29 @@
-CFLAGS  = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion
-CFLAGS += -Wformat-truncation -fno-common # -Wconversion is not SDK-friendly
-CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
-CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_mcu/devices/MIMXRT1062
-CFLAGS += -Icmsis_mcu/devices/MIMXRT1062/drivers -DCPU_MIMXRT1062DVL6B
-CFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA)
-LDSCRIPT = link.ld
-LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map 
+BOARD = rt1060
+IDE = GCC+make
+RTOS = FreeRTOS
+WIZARD_URL ?= http://mongoose.ws/wizard
 
-SOURCES = main.c syscalls.c sysinit.c
-SOURCES += cmsis_mcu/devices/MIMXRT1062/gcc/startup_MIMXRT1062.S # NXP startup file. Compiler-dependent!
-CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS	# Make startup code work as expected
-
-# FreeRTOS. RT1060 has a Cortex-M7 r1p2 core, FreeRTOS recommends using CM4F port for non-r0p1 CM7 micros
-SOURCES += FreeRTOS-Kernel/portable/MemMang/heap_4.c
-SOURCES += FreeRTOS-Kernel/portable/GCC/ARM_CM4F/port.c
-CFLAGS += -IFreeRTOS-Kernel/include 
-CFLAGS += -IFreeRTOS-Kernel/portable/GCC/ARM_CM4F -Wno-conversion
-
-# Mongoose options are defined in mongoose_config.h
-SOURCES += mongoose.c net.c packed_fs.c
-
-# Example specific build options. See README.md
-CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\"
-
-ifeq ($(OS),Windows_NT)
-  RM = cmd /C del /Q /F /S
-else
-  RM = rm -rf
-endif
-
-all build example update: SOURCES += flash_image.c
 all build example: firmware.bin
 
-ram: LDSCRIPT = link_ram.ld
-ram: firmware.bin
+firmware.bin: wizard
+	make -C wizard CFLAGS_EXTRA=$(CFLAGS_EXTRA) && mv wizard/firmware.bin ./
 
-firmware.bin: firmware.elf
-	arm-none-eabi-objcopy -O binary $< $@
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard ; rm mongoose.[ch] ; ln -s ../../../../mongoose.c ; ln -s ../../../../mongoose.h
 
-firmware.elf: FreeRTOS-Kernel cmsis_core cmsis_mcu $(SOURCES) hal.h link_ram.ld link.ld mongoose_config.h
-	arm-none-eabi-gcc $(SOURCES) $(wildcard FreeRTOS-Kernel/*.c) $(CFLAGS) $(LDFLAGS) -o $@
-
-flash: firmware.bin
-# flash
-
-cmsis_core:     # ARM CMSIS core headers
-	git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
-cmsis_mcu:
-	curl -sL https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.MIMXRT1062_DFP.17.1.0.pack -o $@.zip
-	mkdir $@ && cd $@ && unzip -q ../$@.zip
-FreeRTOS-Kernel:  # FreeRTOS sources
-	git clone --depth 1 -b V10.5.0 https://github.com/FreeRTOS/FreeRTOS-Kernel $@
 
 # Automated remote test. Requires env variable VCON_API_KEY set. See https://vcon.io/automated-firmware-tests/
 DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/13
 update: firmware.bin
 	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
 
-update updateram: CFLAGS += -DUART_DEBUG=LPUART3
-
+test update: CFLAGS_EXTRA ="-DUART_DEBUG=LPUART3"
 test: update
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=15 | tee /tmp/output.txt
 	grep 'READY, IP:' /tmp/output.txt       # Check for network init
 
-
-updateram: ram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @firmware.bin
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0003 wm,e000edfc,1 wm,e000ed0c,5fa0004"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	PC=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,4"}' | jq -r .resp[5:]` && \
-	SP=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,0"}' | jq -r .resp[5:]` && \
-	REQ="wm,e000ed08,0 wr,d,$$SP wr,f,$$PC" && \
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"'"$$REQ"'"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0001"}'
-
-testram: updateram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
-	grep 'READY, IP:' /tmp/output.txt       # Check for network init
-
-
 clean:
-	$(RM) firmware.* *.su cmsis_core cmsis_mcu FreeRTOS-Kernel *.zip
+	rm -rf firmware.* wizard*

examples/nxp/rt1060-evk-make-freertos-builtin/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=rt1060&ide=GCC+make&rtos=FreeRTOS&file=README.md)

examples/nxp/rt1060-evk-make-freertos-builtin/dcd.h

@@ -1 +0,0 @@
-../rt1060-evk-make-baremetal-builtin/dcd.h

examples/nxp/rt1060-evk-make-freertos-builtin/flash_image.c

@@ -1 +0,0 @@
-../rt1060-evk-make-baremetal-builtin/flash_image.c

examples/nxp/rt1060-evk-make-freertos-builtin/hal.h

@@ -1,356 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-// https://cache.nxp.com/secured/assets/documents/en/reference-manual/IMXRT1060XRM.pdf
-// https://cache.nxp.com/secured/assets/documents/en/user-guide/MIMXRT1060EVKBUM.pdf
-
-#pragma once
-
-#include "MIMXRT1062.h"
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <string.h>
-
-#define BIT(x) (1UL << (x))
-#define SETBITS(R, CLEARMASK, SETMASK) (R) = ((R) & ~(CLEARMASK)) | (SETMASK)
-#define PIN(bank, num) ((((bank) - '0') << 8) | (num))
-#define PINNO(pin) (pin & 255)
-#define PINBANK(pin) (pin >> 8)
-
-// Use LED for blinking, D8: GPIO_AD_B0_08. GPIO1.8 (schematics, RM)
-#define LED PIN('1', 8)
-
-#ifndef UART_DEBUG
-#define UART_DEBUG LPUART1
-#endif
-
-// No settable constants, see sysinit.c
-#define SYS_FREQUENCY 600000000UL
-
-static inline void spin(volatile uint32_t count) {
-  while (count--) (void) 0;
-}
-
-enum { CLOCK_OFF = 0U, CLOCK_ON_RUN = 1U, CLOCK_ON_RUN_WAIT = 3U };
-static inline void clock_periph(uint32_t index, uint32_t shift, uint32_t val) {
-  volatile uint32_t *r = &CCM->CCGR0;
-  SETBITS(r[index], 3UL << shift, val << shift);
-}
-
-// which peripheral feeds the pin
-static inline void gpio_mux_config(uint16_t index, uint8_t af) {
-  IOMUXC->SW_MUX_CTL_PAD[index] = af;
-}
-
-// which pin feeds the peripheral (2nd stage)
-static inline void periph_mux_config(uint16_t index, uint8_t in) {
-  IOMUXC->SELECT_INPUT[index] = in;
-}
-
-enum { GPIO_MODE_INPUT, GPIO_MODE_OUTPUT };
-enum { GPIO_OTYPE_PUSH_PULL, GPIO_OTYPE_OPEN_DRAIN };
-enum { GPIO_SPEED_LOW, GPIO_SPEED_MEDIUM, GPIO_SPEED_MEDIUM_, GPIO_SPEED_HIGH };
-enum { GPIO_PULL_NONE, GPIO_PULL_DOWN, GPIO_PULL_UP };
-static inline GPIO_Type *gpio_bank(uint16_t pin) {
-  static const GPIO_Type *g[] = {NULL, GPIO1, GPIO2, GPIO3, NULL, GPIO5};
-  return (GPIO_Type *) g[PINBANK(pin)];
-}
-
-// pin driver/pull-up/down configuration (ignore "keeper")
-static inline void gpio_pad_config(uint16_t index, uint8_t type, uint8_t speed,
-                                   uint8_t pull) {
-  bool dopull = pull > 0;
-  if (dopull) --pull;
-  IOMUXC->SW_PAD_CTL_PAD[index] =
-      IOMUXC_SW_PAD_CTL_PAD_SPEED(speed) | IOMUXC_SW_PAD_CTL_PAD_ODE(type) |
-      IOMUXC_SW_PAD_CTL_PAD_SRE(speed >= GPIO_SPEED_HIGH) |
-      IOMUXC_SW_PAD_CTL_PAD_PUE(1) | IOMUXC_SW_PAD_CTL_PAD_PKE(dopull) |
-      IOMUXC_SW_PAD_CTL_PAD_PUS(pull) | IOMUXC_SW_PAD_CTL_PAD_DSE(7);
-}
-
-static inline void gpio_init(uint16_t pin, uint8_t mode, uint8_t type,
-                             uint8_t speed, uint8_t pull) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint8_t bit = (uint8_t) PINNO(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  switch (PINBANK(pin)) {
-    case 1:
-      gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_00 + bit, 5);
-      gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_00 + bit, type, speed,
-                      pull);
-      clock_periph(1, CCM_CCGR1_CG13_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 2:
-      gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00 + bit, 5);
-      gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_00 + bit, type, speed,
-                      pull);
-      clock_periph(0, CCM_CCGR0_CG15_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 3:
-      gpio_mux_config(bit < 12 ? kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_00 + bit
-                      : bit < 18
-                          ? kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00 + bit - 12
-                          : kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32 + bit - 18,
-                      5);
-      gpio_pad_config(bit < 12 ? kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_00 + bit
-                      : bit < 18
-                          ? kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B0_00 + bit - 12
-                          : kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_32 + bit - 18,
-                      type, speed, pull);
-      clock_periph(2, CCM_CCGR2_CG13_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    case 5:
-      // TODO(): support sw_mux
-      clock_periph(1, CCM_CCGR1_CG15_SHIFT, CLOCK_ON_RUN_WAIT);
-      break;
-    default:
-      break;
-  }
-
-  gpio->IMR &= ~mask;
-  if (mode == GPIO_MODE_INPUT) {
-    gpio->GDIR &= ~mask;
-  } else {
-    gpio->GDIR |= mask;
-  }
-}
-static inline void gpio_input(uint16_t pin) {
-  gpio_init(pin, GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_NONE);
-}
-static inline void gpio_output(uint16_t pin) {
-  gpio_init(pin, GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_NONE);
-}
-
-static inline bool gpio_read(uint16_t pin) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-  return gpio->DR & mask;
-}
-static inline void gpio_write(uint16_t pin, bool value) {
-  GPIO_Type *gpio = gpio_bank(pin);
-  uint32_t mask = (uint32_t) BIT(PINNO(pin));
-  if (value) {
-    gpio->DR |= mask;
-  } else {
-    gpio->DR &= ~mask;
-  }
-}
-static inline void gpio_toggle(uint16_t pin) {
-  gpio_write(pin, !gpio_read(pin));
-}
-
-// 14.5 Table 14-4: uart_clk_root
-// see sysinit.c for clocks, (14.7.9: defaults to pll3_80m = PLL3/6/1 = 80MHz)
-static inline void uart_init(LPUART_Type *uart, unsigned long baud) {
-  uint8_t af = 2;                           // Alternate function
-  uint16_t mr = 0, pr = 0, mt = 0, pt = 0;  // pins
-  uint32_t freq = 80000000;                 // uart_clk_root frequency
-  if (uart == LPUART1)
-    mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12,
-    pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_12,
-    mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13,
-    pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_13;
-  if (uart == LPUART3)
-    mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06,
-    pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_06,
-    mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07,
-    pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_07;
-
-  if (uart == LPUART1) clock_periph(5, CCM_CCGR5_CG12_SHIFT, CLOCK_ON_RUN_WAIT);
-  if (uart == LPUART3) clock_periph(0, CCM_CCGR0_CG6_SHIFT, CLOCK_ON_RUN_WAIT);
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  gpio_mux_config(mt, af);
-  gpio_pad_config(pt, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-  gpio_mux_config(mr, af);
-  gpio_pad_config(pr, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-
-  uart->GLOBAL |= LPUART_GLOBAL_RST_MASK;  // reset, CTRL = 0, defaults
-  uart->GLOBAL &= ~LPUART_GLOBAL_RST_MASK;
-  SETBITS(uart->BAUD,
-          LPUART_BAUD_OSR_MASK | LPUART_BAUD_SBR_MASK | LPUART_BAUD_SBNS_MASK,
-          LPUART_BAUD_OSR(16 - 1) |
-              LPUART_BAUD_SBR(freq / (16 * baud)));  // Rx sample at 16x
-  SETBITS(uart->CTRL,
-          LPUART_CTRL_PE_MASK | LPUART_CTRL_M_MASK | LPUART_CTRL_ILT_MASK |
-              LPUART_CTRL_IDLECFG_MASK,
-          LPUART_CTRL_IDLECFG(1) | LPUART_CTRL_ILT(1) |
-              LPUART_BAUD_SBNS(0));  // no parity, idle 2 chars after 1 stop bit
-  uart->CTRL |= LPUART_CTRL_TE_MASK | LPUART_CTRL_RE_MASK;
-}
-
-static inline void uart_write_byte(LPUART_Type *uart, uint8_t byte) {
-  uart->DATA = byte;
-  while ((uart->STAT & LPUART_STAT_TDRE_MASK) == 0) spin(1);
-}
-static inline void uart_write_buf(LPUART_Type *uart, char *buf, size_t len) {
-  while (len-- > 0) uart_write_byte(uart, *(uint8_t *) buf++);
-}
-static inline int uart_read_ready(LPUART_Type *uart) {
-  (void) uart;
-  return uart->STAT & LPUART_STAT_RDRF_MASK;
-}
-static inline uint8_t uart_read_byte(LPUART_Type *uart) {
-  return (uint8_t) (uart->DATA & 255);
-}
-
-static inline void rng_init(void) {
-  clock_periph(6, CCM_CCGR6_CG6_SHIFT, CLOCK_ON_RUN_WAIT);  // trng_clk
-  SETBITS(TRNG->MCTL,
-          TRNG_MCTL_PRGM_MASK | TRNG_MCTL_ERR_MASK | TRNG_MCTL_RST_DEF_MASK,
-          TRNG_MCTL_PRGM(1) | TRNG_MCTL_ERR(1) |
-              TRNG_MCTL_RST_DEF(1));  // reset to default values
-  SETBITS(TRNG->MCTL, TRNG_MCTL_PRGM_MASK | TRNG_MCTL_ERR_MASK,
-          TRNG_MCTL_PRGM(0));            // set to run mode
-  (void) TRNG->ENT[TRNG_ENT_COUNT - 1];  // start new entropy generation
-  (void) TRNG->ENT[0];                   // defect workaround
-}
-static inline uint32_t rng_read(void) {
-  static uint8_t idx = 0;
-  while ((TRNG->MCTL & TRNG_MCTL_ENT_VAL_MASK) == 0) (void) 0;
-  uint32_t data = TRNG->ENT[idx++];  // read data
-  idx %= TRNG_ENT_COUNT;             // stay within array limits
-  if (idx == 0)                      // we've just read TRNG_ENT_COUNT - 1
-    (void) TRNG->ENT[0];             // defect workaround
-  return data;
-}
-
-// - PHY has no xtal, XI driven from ENET_REF_CLK1 (labeled as ENET_TX_REF_CLK
-// (GPIO_AD_B1_10)), generated by the MCU
-// - PHY RST connected to GPIO1.9 (GPIO_AD_B0_09); INTRP/NAND_TREE connected to
-// GPIO1.10 (GPIO_AD_B0_10)
-// - 41.4 REF_CLK1 is RMII mode reference clock for Rx, Tx, and SMI; it is I/O
-// - 11.3.2 IOMUXC_GPR_GPR1
-//   - bit 13: ENET1_CLK_SEL --> 0 ENET1 TX reference clock driven by
-//   ref_enetpll and output via ENET_REF_CLK1 (labeled as ENET_REF_CLK
-//   elsewhere)
-//   - bit 17: ENET1_TX_CLK_DIR --> 1 ENET1_TX_CLK output driver enabled
-// - 14.6.1.3.6 Ethernet PLL (PLL6)
-// - 14.8.14: configure PLL6 to generate 50MHz clocks for ENET and RMII.
-static inline void ethernet_init(void) {
-  // setup PLL and clock ENET from it
-  SETBITS(CCM_ANALOG->PLL_ENET, CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC_MASK,
-          CCM_ANALOG_PLL_ENET_BYPASS_MASK |
-              CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC(0));  // bypass to 24MHz osc
-  SETBITS(
-      CCM_ANALOG->PLL_ENET,
-      CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK | CCM_ANALOG_PLL_ENET_POWERDOWN_MASK,
-      CCM_ANALOG_PLL_ENET_DIV_SELECT(1) | CCM_ANALOG_PLL_ENET_ENABLE_MASK);
-  while ((CCM_ANALOG->PLL_ENET & CCM_ANALOG_PLL_ENET_LOCK_MASK) == 0)
-    spin(1);  // wait until it is stable
-  CCM_ANALOG->PLL_ENET &= ~CCM_ANALOG_PLL_ENET_BYPASS_MASK;
-
-  gpio_init(PIN('1', 9), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL,
-            GPIO_SPEED_MEDIUM, GPIO_PULL_UP);  // set GPIO1.9 as GPIO (PHY \RST)
-  gpio_write(PIN('1', 9), 0);                  // reset PHY
-
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_10,
-                  6);  // set for ENET_REF_CLK
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_10] |=
-      IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_ENET_IPG_CLK_RMII_SELECT_INPUT,
-                    1);  // drive peripheral from B1_10, so RMII clock is taken
-                         // from ENET_REF_CLK
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_10, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  IOMUXC_GPR->GPR1 |=
-      IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR(1);  // Set ENET_TX_CLK as output
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_04, 3);  // set for RXDATA0
-  periph_mux_config(kIOMUXC_ENET0_RXDATA_SELECT_INPUT,
-                    1);  // drive peripheral from B1_04
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_04, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_05, 3);  // set for RXDATA1
-  periph_mux_config(kIOMUXC_ENET1_RXDATA_SELECT_INPUT,
-                    1);  // drive peripheral from B1_05
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_05, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_06, 3);  // set for CRS
-  periph_mux_config(kIOMUXC_ENET_RXEN_SELECT_INPUT,
-                    1);  // drive peripheral from B1_06
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_06, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_07, 3);  // set for TXDATA0
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_07, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_08, 3);  // set for TXDATA1
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_08, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_09, 3);  // set for TXEN
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_09, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_11, 3);  // set for RXERR
-  periph_mux_config(kIOMUXC_ENET_RXERR_SELECT_INPUT,
-                    1);  // drive peripheral from B0_12
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_B1_11, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_HIGH, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_40, 4);  // set for MDC
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_40, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_41, 4);  // set for MDIO
-  periph_mux_config(kIOMUXC_ENET_MDIO_SELECT_INPUT,
-                    1);  // drive peripheral from EMC_41
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_41, GPIO_OTYPE_PUSH_PULL,
-                  GPIO_SPEED_MEDIUM, GPIO_PULL_UP);
-
-  gpio_init(PIN('1', 10), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL,
-            GPIO_SPEED_MEDIUM,
-            GPIO_PULL_UP);      // set GPIO1.10 as GPIO (PHY INTRP/NAND_TREE)
-  gpio_write(PIN('1', 10), 1);  // prevent NAND_TREE
-  spin(10000);                  // keep PHY RST low for a while
-  gpio_write(PIN('1', 9), 1);   // deassert RST
-  gpio_init(PIN('1', 10), GPIO_MODE_INPUT, 0, GPIO_SPEED_MEDIUM,
-            GPIO_PULL_UP);  // setup IRQ (pulled-up)(not used)
-
-  clock_periph(1, CCM_CCGR1_CG5_SHIFT, CLOCK_ON_RUN_WAIT);  // enet_ipg_clk
-  NVIC_EnableIRQ(ENET_IRQn);  // Setup Ethernet IRQ handler
-}
-
-// Helper macro for MAC generation, byte reads not allowed
-#define GENERATE_LOCALLY_ADMINISTERED_MAC()                \
-  {                                                        \
-    2, OCOTP->CFG0 & 255, (OCOTP->CFG0 >> 10) & 255,       \
-        ((OCOTP->CFG0 >> 19) ^ (OCOTP->CFG1 >> 19)) & 255, \
-        (OCOTP->CFG1 >> 10) & 255, OCOTP->CFG1 & 255       \
-  }
-// NOTE: You can fuse your own MAC and read it from OCOTP->MAC0, OCOTP->MAC1,
-// OCOTP->MAC2
-
-static inline void flash_init(void) { // QSPI in FlexSPI
-  // set pins
-  clock_periph(4, CCM_CCGR4_CG1_SHIFT, CLOCK_ON_RUN_WAIT);  // iomuxc_ipg_clk_s
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05, 1);  // set for DQS
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_05] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DQS_SELECT_INPUT, 0);  // drive peripheral from B1_05
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_05, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06, 1);  // set for SS
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_06] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_06, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07, 1);  // set for SCLK
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_07] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_SCK_SELECT_INPUT, 0);  // drive peripheral from B1_07
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_07, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08, 1);  // set for DATA0
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_08] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DATA0_SELECT_INPUT, 0);  // drive peripheral from B1_08
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_08, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09, 1);  // set for DATA1
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_09] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DATA1_SELECT_INPUT, 0);  // drive peripheral from B1_09
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_09, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10, 1);  // set for DATA2
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_10] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DATA2_SELECT_INPUT, 0);  // drive peripheral from B1_10
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_10, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11, 1);  // set for DATA3
-  IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B1_11] |= IOMUXC_SW_MUX_CTL_PAD_SION(1);  // loop signal back from pin
-  periph_mux_config(kIOMUXC_FLEXSPIA_DATA3_SELECT_INPUT, 0);  // drive peripheral from B1_11
-  gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_11, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE);
-  // set FlexSPI clock
-  SETBITS(CCM->CSCMR1, CCM_CSCMR1_FLEXSPI_CLK_SEL_MASK | CCM_CSCMR1_FLEXSPI_PODF_MASK, CCM_CSCMR1_FLEXSPI_CLK_SEL(3) | CCM_CSCMR1_FLEXSPI_PODF(7));  // select PLL3 PFD0 /8
-  clock_periph(6, CCM_CCGR6_CG5_SHIFT, CLOCK_ON_RUN_WAIT);  // enable
-}

examples/nxp/rt1060-evk-make-freertos-builtin/link.ld

@@ -1,22 +0,0 @@
-ENTRY(Reset_Handler);
-MEMORY {
-  flash_hdr(rx)  : ORIGIN = 0x60000000, LENGTH = 8k
-  flash_irq(rx)  : ORIGIN = 0x60002000, LENGTH = 1k
-  flash_code(rx) : ORIGIN = 0x60002400, LENGTH = 8183k
-
-  itcram(rx)       : ORIGIN = 0x00000000, LENGTH = 128k
-  dtcram(rw)       : ORIGIN = 0x20000000, LENGTH = 128k
-  ocram(rw)        : ORIGIN = 0x20200000, LENGTH = 256k   /* Is this cached ? */
-}
-__StackTop = ORIGIN(dtcram) + LENGTH(dtcram);
-
-SECTIONS {
-  .hdr  : { FILL(0xff) ; KEEP(*(.cfg)) . = 0x1000 ; KEEP(*(.ivt)) . = 0x1020 ;
-            KEEP(*(.dat)) . = 0x1030 ; KEEP(*(.dcd)) . = 0x2000 ;} >flash_hdr
-  .irq  : { KEEP(*(.isr_vector)) }  > flash_irq
-  .text : { *(.text* .text.*) *(.rodata*) ; } > flash_code
-  .data : { __data_start__ = .; *(.data SORT(.data.*)) __data_end__ = .; } > dtcram AT > flash_code
-  __etext = LOADADDR(.data);
-  .bss  : { __bss_start__ = .; *(.bss SORT(.bss.*) COMMON) __bss_end__ = .; } > dtcram
-  _end = .;
-}

examples/nxp/rt1060-evk-make-freertos-builtin/main.c

@@ -1,82 +0,0 @@
-// Copyright (c) 2023 Cesanta Software Limited
-// All rights reserved
-
-#include "hal.h"
-#include "mongoose.h"
-#include "net.h"
-
-#define BLINK_PERIOD_MS 1000  // LED blinking period in millis
-
-// workaround optimizer somehow causing SysTick to fire before FreeRTOS has
-// fully initialized
-extern void xPortSysTickHandler(void);
-void SysTick_Handler(void) {
-  if (xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED)
-    xPortSysTickHandler();
-}
-
-void mg_random(void *buf, size_t len) {  // Use on-board RNG
-  for (size_t n = 0; n < len; n += sizeof(uint32_t)) {
-    uint32_t r = rng_read();
-    memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r));
-  }
-}
-
-static void timer_fn(void *arg) {
-  struct mg_tcpip_if *ifp = arg;                         // And show
-  const char *names[] = {"down", "up", "req", "ready"};  // network stats
-  MG_INFO(("Ethernet: %s, IP: %M, rx:%u, tx:%u, dr:%u, er:%u",
-           names[ifp->state], mg_print_ip4, &ifp->ip, ifp->nrecv, ifp->nsent,
-           ifp->ndrop, ifp->nerr));
-}
-
-static void server(void *args) {
-  struct mg_mgr mgr;        // Initialise Mongoose event manager
-  mg_mgr_init(&mgr);        // and attach it to the interface
-  mg_log_set(MG_LL_DEBUG);  // Set log level
-
-  // Initialise Mongoose network stack
-  ethernet_init();
-  struct mg_tcpip_driver_imxrt_data driver_data = {.mdc_cr = 24, .phy_addr = 2};
-  struct mg_tcpip_if mif = {.mac = GENERATE_LOCALLY_ADMINISTERED_MAC(),
-                            // Uncomment below for static configuration:
-                            // .ip = mg_htonl(MG_U32(192, 168, 0, 223)),
-                            // .mask = mg_htonl(MG_U32(255, 255, 255, 0)),
-                            // .gw = mg_htonl(MG_U32(192, 168, 0, 1)),
-                            .driver = &mg_tcpip_driver_imxrt,
-                            .driver_data = &driver_data};
-  mg_tcpip_init(&mgr, &mif);
-  mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mif);
-
-  MG_INFO(("MAC: %M. Waiting for IP...", mg_print_mac, mif.mac));
-  while (mif.state != MG_TCPIP_STATE_READY) {
-    mg_mgr_poll(&mgr, 0);
-  }
-
-  MG_INFO(("Initialising application..."));
-  web_init(&mgr);
-
-  MG_INFO(("Starting event loop"));
-  for (;;) mg_mgr_poll(&mgr, 1);  // Infinite event loop
-  (void) args;
-}
-
-static void blinker(void *args) {
-  gpio_output(LED);  // Setup blue LED
-  for (;;) {
-    gpio_toggle(LED);
-    vTaskDelay(pdMS_TO_TICKS(BLINK_PERIOD_MS));
-  }
-  (void) args;
-}
-
-int main(void) {
-  uart_init(UART_DEBUG, 115200);  // Initialise UART
-
-  // Start tasks. NOTE: stack sizes are in 32-bit words
-  xTaskCreate(blinker, "blinker", 128, ":)", configMAX_PRIORITIES - 1, NULL);
-  xTaskCreate(server, "server", 2048, 0, configMAX_PRIORITIES - 1, NULL);
-
-  vTaskStartScheduler();  // This blocks
-  return 0;
-}

examples/nxp/rt1060-evk-make-freertos-builtin/mongoose_config.h

@@ -1,13 +0,0 @@
-#pragma once
-
-#include <errno.h>	// we are not using lwIP
-
-// See https://mongoose.ws/documentation/#build-options
-#define MG_ARCH MG_ARCH_FREERTOS
-
-#define MG_ENABLE_TCPIP 1
-#define MG_ENABLE_DRIVER_IMXRT 1
-#define MG_IO_SIZE 256
-#define MG_ENABLE_CUSTOM_RANDOM 1
-#define MG_ENABLE_PACKED_FS 1
-

examples/nxp/rt1060-evk-make-freertos-builtin/net.c

@@ -1 +0,0 @@
-../../device-dashboard/net.c

examples/nxp/rt1060-evk-make-freertos-builtin/net.h

@@ -1 +0,0 @@
-../../device-dashboard/net.h

examples/nxp/rt1060-evk-make-freertos-builtin/packed_fs.c

@@ -1 +0,0 @@
-../../device-dashboard/packed_fs.c

examples/nxp/rt1060-evk-make-freertos-builtin/syscalls.c

@@ -1,85 +0,0 @@
-#include <sys/stat.h>
-
-#include "hal.h"
-
-int _fstat(int fd, struct stat *st) {
-  if (fd < 0) return -1;
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-void *_sbrk(int incr) {
-  extern char _end;
-  static unsigned char *heap = NULL;
-  unsigned char *prev_heap;
-  if (heap == NULL) heap = (unsigned char *) &_end;
-  prev_heap = heap;
-  heap += incr;
-  return prev_heap;
-}
-
-int _open(const char *path) {
-  (void) path;
-  return -1;
-}
-
-int _close(int fd) {
-  (void) fd;
-  return -1;
-}
-
-int _isatty(int fd) {
-  (void) fd;
-  return 1;
-}
-
-int _lseek(int fd, int ptr, int dir) {
-  (void) fd, (void) ptr, (void) dir;
-  return 0;
-}
-
-void _exit(int status) {
-  (void) status;
-  for (;;) asm volatile("BKPT #0");
-}
-
-void _kill(int pid, int sig) {
-  (void) pid, (void) sig;
-}
-
-int _getpid(void) {
-  return -1;
-}
-
-int _write(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  if (fd == 1) uart_write_buf(UART_DEBUG, ptr, (size_t) len);
-  return -1;
-}
-
-int _read(int fd, char *ptr, int len) {
-  (void) fd, (void) ptr, (void) len;
-  return -1;
-}
-
-int _link(const char *a, const char *b) {
-  (void) a, (void) b;
-  return -1;
-}
-
-int _unlink(const char *a) {
-  (void) a;
-  return -1;
-}
-
-int _stat(const char *path, struct stat *st) {
-  (void) path, (void) st;
-  return -1;
-}
-
-int mkdir(const char *path, mode_t mode) {
-  (void) path, (void) mode;
-  return -1;
-}
-
-void _init(void) {}