Commit Graph

  • 2beecd912c Updates. Jean Delvare 2006-04-22 08:54:26 +00:00
  • 6eb8c2a9a7 Add W83793R/G detection. Original patch from Yuan Mu (Winbond). Jean Delvare 2006-04-22 08:53:30 +00:00
  • 49a745af33 Add a new mode W. It uses SMBus Read Word transactions as mode w does, but it only triggers a transaction on even register addresses, relying on the target chip to increment its internal register pointer between the high and low byte of the word. EEPROMs behave that way, so this mode makes it possible to dump an EEPROM contents faster. I2C Block Read is still faster but it isn't available on all busses, while SMBus Read Word is very popular. This mode also makes it possible to test SMBus Read Word transactions on a given adapter using common EEPROMs. Jean Delvare 2006-04-16 14:01:32 +00:00
  • ea5ef92b78 Add a new option to i2cdetect (-F) to query the functionalities of an I2C bus. Jean Delvare 2006-04-16 13:34:53 +00:00
  • c94e355e0a Restore bank register value after bank switching. Jean Delvare 2006-04-15 10:34:28 +00:00
  • 688b2149dc Fix depmod on non-running kernel version. Original patch from Peter Breitenlohner. Jean Delvare 2006-04-15 07:52:59 +00:00
  • ed8cbf315c Add detection of more Fintek chips: * F75373S/SG * F75383S/M * F75384S/M * custom power control chip at SMBus 0x2f Jean Delvare 2006-04-04 17:13:32 +00:00
  • 6dec3c202f Add Fintek manufacturer ID. Jean Delvare 2006-04-01 13:52:24 +00:00
  • fb38a7ea32 Add detection of several Fintek chips: * F75363SG (SMBus, presumably LM63-compatible) * F75111R/RG/N (SMBus, GPIO) * F75121R/F75122R/RG (SMBus, VID+GPIO) * F75375S/SP (SMBus) * F75387SG/RG (SMBus) * F81218D (LPC, UART) Jean Delvare 2006-04-01 11:43:55 +00:00
  • bd529fa386 Detect the SMSC LPC47M584-NC Super-I/O chip. We don't know anything about that chip right now, it may or may not have hardware monitoring functionalities. Jean Delvare 2006-03-31 14:08:51 +00:00
  • 4798dea54f Big update. Jean Delvare 2006-03-28 21:34:01 +00:00
  • dee3639075 Add userspace support for the smsc47m192 driver. Patch from Hartmut Rick. Jean Delvare 2006-03-28 21:31:16 +00:00
  • f4302b1e59 Backport from Linux 2.6: Add Broadcom HT-1000 south bridge's PCI ID to i2c-piix driver. Jean Delvare 2006-03-24 09:47:29 +00:00
  • 2cd439dacf Backport from Linux 2.6: Document the individual alarm and beep bits of the w83781d driver. Jean Delvare 2006-03-24 09:06:25 +00:00
  • ac8e8a7e11 ATI IXP southbridges are now supported by the i2c-piix4 driver. Jean Delvare 2006-03-23 17:01:31 +00:00
  • 65ff7b8531 Add the voltages of W83627EHF, plus minor fixes Rudolf Marek 2006-03-22 22:47:17 +00:00
  • 8212877b81 Add W83627EHF fan and temperature alarm support. Jean Delvare 2006-03-22 14:26:48 +00:00
  • 0b6ac4f953 Add the W83627EHF Voltages and voltage alarms support Rudolf Marek 2006-03-22 13:53:30 +00:00
  • 43390d50f9 Add the ASUS and Winbond Rudolf Marek 2006-03-22 13:35:23 +00:00
  • 5fd7ff77f6 Fix typo in chip name. Jean Delvare 2006-03-20 21:00:41 +00:00
  • 6558e9d9a9 List more Winbond chips. Jean Delvare 2006-03-13 19:14:43 +00:00
  • a4b4c94370 Prevent warning on 64-bit PCI addresses. This is done by not gathering PCI data we have no need for. Jean Delvare 2006-03-10 09:27:28 +00:00
  • 1330a877b7 It isn't an error when a w83792d has no fan4-7. Patch from Yuan Mu. Jean Delvare 2006-03-03 20:27:51 +00:00
  • 357b01228e Fix a harmless typo in w83792d in7 and in8 code. Patch from Yuan Mu. Jean Delvare 2006-03-03 19:45:55 +00:00
  • 335a3a3668 Add support for the Fintek F71872F/FG. This chip will be supported by the f71805f driver in the future, but is not yet. Jean Delvare 2006-03-01 20:47:03 +00:00
  • 050360595c Fix typo breaking f71805f. Reported by Willy Tarreau. Jean Delvare 2006-02-27 07:39:26 +00:00
  • 08738f13de Add the "Temp" into temps label Rudolf Marek 2006-02-25 21:58:16 +00:00
  • 70bb3c495e Fix device scan when no i2c support exists or no i2c bus driver is loaded. Jean Delvare 2006-02-25 21:32:26 +00:00
  • 184cb1e3c7 Use real-time alarm registers instead of interrupt registers for W83782D, W83627HF, W83783S and W83791D. This is a backport from Linux 2.6. Jean Delvare 2006-02-23 23:11:17 +00:00
  • fcc284f226 Don't grep autoconf.h on user-space targets. Jean Delvare 2006-02-23 22:58:52 +00:00
  • 4eee6eab89 Add ServerWorks HT-1000 SMBus detection. Jean Delvare 2006-02-22 20:29:33 +00:00
  • 82dfdcd401 Prep for next release Philip Edelbrock 2006-02-15 01:48:36 +00:00
  • bb3009ec04 This commit was manufactured by cvs2svn to create tag 'V2-10-0'. V2-10-0 Frodo Looijaard 2006-02-15 01:40:35 +00:00
  • 4850355cfb Tag and release 2.10.0 Philip Edelbrock 2006-02-15 01:40:35 +00:00
  • 676c7c3b7a Update. Jean Delvare 2006-02-11 18:55:48 +00:00
  • ebbd0ba836 Bump lib version to 3.1.0 for the upcoming lm_sensors 2.10.0 release. Jean Delvare 2006-02-11 18:54:49 +00:00
  • a3ea76d0d4 Silently skip aready exiting nodes. Jean Delvare 2006-02-11 11:59:41 +00:00
  • 25e6966183 Add missing include for struct semaphore. Jean Delvare 2006-02-07 10:15:27 +00:00
  • f0c2fcf21d Add the computation line for iternal diode in vt1211 config section Rudolf Marek 2006-01-29 21:40:31 +00:00
  • f2ef2f833e Updates. Jean Delvare 2006-01-29 16:16:09 +00:00
  • 3bc418131e Strip non-ASCII characters out of the part number. Jean Delvare 2006-01-27 22:15:42 +00:00
  • 74478d5e48 Decode manufacturing location as ASCII first, fallback to binary. Improve decoding of the memory type, using a simple heuristic to differenciate between Rambus and other types. Jean Delvare 2006-01-27 21:03:54 +00:00
  • c83a8a43e8 Add back the temp1 in vt1211, patch from Juerg Haefliger <juergh@gmail.com> Rudolf Marek 2006-01-27 21:02:09 +00:00
  • 528d3c7f4d Sync the JEDEC IDs to JEP106S (January 11, 2006) Rudolf Marek 2006-01-25 21:30:05 +00:00
  • 7abd07cf00 Fix sysctl warnings on x86_64. Reorder includes. Jean Delvare 2006-01-23 07:48:38 +00:00
  • 9a3dc11375 Don't decode anything unless the checksum is valid (or the -c option is used). Bump version. Jean Delvare 2006-01-22 16:17:46 +00:00
  • 7311d55ae9 Use sysopen/sysread instead of open/read for better performance (the eeprom driver can read 32-byte slices instead of the whole data). Read 64-byte blocks, as this allows some code cleanups. Jean Delvare 2006-01-22 16:16:06 +00:00
  • 7d2b877afe Clearer text output. Jean Delvare 2006-01-22 16:13:34 +00:00
  • 0602a3a949 Reindent print functions. Jean Delvare 2006-01-22 16:12:45 +00:00
  • f73ee701a0 Drop the generic CVS help at the top of the file. CVS is not exactly a new technology anymore. Jean Delvare 2006-01-19 20:44:48 +00:00
  • a0cd93a012 Update. Jean Delvare 2006-01-19 20:39:26 +00:00
  • 136916a3b2 Sparse minor fixes, and rewrite of the SMBus vs. ISA paragraph. Jean Delvare 2006-01-19 20:33:57 +00:00
  • 913221c126 Do not ask the user its preference between SMBus and ISA: always use ISA, as it is faster and generally more reliable. Jean Delvare 2006-01-19 20:28:00 +00:00
  • c9bc9768a6 Add note - libsensors(3) doesn't see eeprom/SPD anymore. Mark M. Hoffman 2006-01-19 04:46:16 +00:00
  • eb80b6f0bd Improve DS1621 detection to prevent other chips from being misdetected as one. Thanks to Aurelien Jarno for testing. Jean Delvare 2006-01-17 07:34:49 +00:00
  • 99a6949224 Lower the confidence of ITE overclocking chips. Do not scan address 0x37 for these chips, as it may cause problem with some eeproms. Jean Delvare 2006-01-16 18:12:46 +00:00
  • 533b4e8dd2 Fix the udev detection in the case /etc/udev/udev.conf exists but doesn't mention a specific db location. Tested by Rudolf Marek. Jean Delvare 2006-01-15 18:40:41 +00:00
  • c0caef7470 Added the IT8201R/IT8203R/IT8206R/IT8266R / Over-Clock Controller detection Rudolf Marek 2006-01-15 18:19:43 +00:00
  • 4e4172e270 Drop legacy ISA detection of the W83697HF chip. The w83781d driver does not support this chip anymore. Jean Delvare 2006-01-14 23:19:29 +00:00
  • 5a9e2dda61 Add 661 to list of SiS north bridges to help detect SMBus device when running kernels 2.4.x. Mark M. Hoffman 2006-01-14 04:16:00 +00:00
  • 0dec718da5 Drop unused struct member lm75. Jean Delvare 2006-01-10 11:22:06 +00:00
  • 88af21a673 Update. Jean Delvare 2006-01-10 11:20:06 +00:00
  • b36654cb3b Add 2.4 kernel and user-space support for the Winbond W83687THF chip. Needs testing. Jean Delvare 2006-01-10 11:17:17 +00:00
  • 9f9be64fab Fix a reported compilation breakage with gcc 3.4 due to inline functions being called before their actual definition. Thanks to Greg Kroah-Hartman for the report. Also, drop an unused lock. Jean Delvare 2006-01-09 20:02:21 +00:00
  • 337ffc5729 Add support for the new platform drivers (Linux 2.6, sysfs). Jean Delvare 2006-01-09 19:55:18 +00:00
  • dcf611d1c7 One more supported PCI ID for the i2c-nforce2 driver. This is a backport from Linux 2.6. Jean Delvare 2006-01-07 17:26:14 +00:00
  • ef432cb2ae Clarify the W83627THF VID documentation. Backport from Linux 2.6, original patch from Mark M. Hoffman. Jean Delvare 2006-01-07 15:45:59 +00:00
  • c6d1ade5fe Always set the SMBAUXCTL register (which enables/disables PEC) explicitly before each transaction. Backport from Linux 2.6, original patch from Mark M. Hoffman. Jean Delvare 2006-01-07 15:30:18 +00:00
  • db773f6c88 Fix options in usage message. Jean Delvare 2005-12-27 20:01:31 +00:00
  • a436b5b814 Update. Jean Delvare 2005-12-17 17:48:20 +00:00
  • de5a8c5abb Cleanups to the fan and set_fan_div code. Jean Delvare 2005-12-17 17:36:05 +00:00
  • fb223c5d24 Fix fan div auto-adjust. Patch from Yuan Mu. Jean Delvare 2005-12-17 17:26:35 +00:00
  • 4d5a7df886 Remove the version 1 specifics part. It's very old and I'd hope nobody uses this anymore. At any rate, there's little point in including version 1 information in the version 2 FAQ. Set FAQ version to 2.18. Jean Delvare 2005-12-17 11:25:33 +00:00
  • e843854352 Simplify message logging. Jean Delvare 2005-12-13 19:53:22 +00:00
  • a359166a48 Check for Fintek ID. Jean Delvare 2005-12-13 19:44:04 +00:00
  • dafffa2ec4 Rewrite the Super-I/O register access part so that we do not rely on globals. The resulting code is slightly more compact too (both source and compiled binary). Jean Delvare 2005-12-13 19:35:17 +00:00
  • c1ff1bbd55 Initialize the chip before registering it. Drop useless local variable initialization. Jean Delvare 2005-12-12 20:24:53 +00:00
  • a51b72b468 Drop useless local variable. Jean Delvare 2005-12-11 10:05:17 +00:00
  • 0b298a851e Fix fan control mode (PWM/DC) reporting. Jean Delvare 2005-12-11 09:58:01 +00:00
  • faf61c24c8 Patch from Yuan Mu, with bug fixes and code cleanups backported from Linux 2.6: Jean Delvare 2005-12-11 09:20:21 +00:00
  • 1bb52a68df Remove trailing whitespace. Patch from Yuan Mu. Jean Delvare 2005-12-11 08:25:59 +00:00
  • 9ada552b65 Add detection of the Intel 82845G (i2c-i810 driver). Jean Delvare 2005-12-09 19:44:49 +00:00
  • 939e19d1fb Update. Jean Delvare 2005-12-09 19:36:42 +00:00
  • 0d65cedd4c Patch from Yuan Mu: Jean Delvare 2005-12-09 19:35:58 +00:00
  • 06153c7a4c Display VID as 0V for W83627THF when GPIO5 is not used as VID inputs. Backport of Yuan Mu's patch for Linux 2.6. Jean Delvare 2005-12-09 19:29:01 +00:00
  • 075bdce06d Add note on via686a's temps contributed by Patrick Thomson. Jean Delvare 2005-12-07 20:45:38 +00:00
  • 6dfe89a57a Add Analog Devices ADT7476 detection. Jean Delvare 2005-11-26 11:28:44 +00:00
  • 5ab5681d54 Update it87/it8712 section: * Do not scale +3.3V by default, most boards don't need it. * Add alternate +5V compute line for some Gigabyte boards. Jean Delvare 2005-11-22 22:16:13 +00:00
  • ae63690c60 Patch from Anton V. Staaf: Jean Delvare 2005-11-21 20:07:02 +00:00
  • 9349904858 Ask the users for help on to-be-tested bus drivers. Jean Delvare 2005-11-20 19:53:11 +00:00
  • b967ed740b Remove dead code in PCI adapter detection loop. Jean Delvare 2005-11-20 19:25:28 +00:00
  • bde14b0715 Change state of ATI SMBus to "to-be-tested" Rudolf Marek 2005-11-20 18:56:22 +00:00
  • de65c63acc Fix vt8231 temperature limits example. Jean Delvare 2005-11-19 19:52:27 +00:00
  • 9e341d359b Simplify vt8231 thermistor equations a little. Jean Delvare 2005-11-19 15:36:27 +00:00
  • 5cd5fde08d vt8231 cleanups, to get the 2.4 driver, libsensors and sensors in line with the new 2.6 driver. The most important changes are temp inputs renumbering, and conversion formulas changes, because part of the conversions are now done by the driver as required by the interface standard. Jean Delvare 2005-11-19 14:55:30 +00:00
  • c92b3a8870 Fix Vin values in the comments of the lm78 section. Jean Delvare 2005-11-15 18:13:05 +00:00
  • 8e6ec2fbce Fix indentation of disabled ISA device hint. Jean Delvare 2005-11-13 09:50:21 +00:00
  • 5f8432f7d3 Link to Christian Hammers' config file collection. Jean Delvare 2005-11-12 11:31:35 +00:00
  • ea30854a22 Drop DEFAULT_VRM, as it makes no sense to have a single default VRM for all drivers. Same was done it Linux 2.6 some times ago. Also comment out all "set vrm" lines in sensors.conf.eg, as Linux 2.6 now accurately deduces the VRM from the CPU model. Jean Delvare 2005-11-12 09:30:38 +00:00
  • 3e8bc2fd9d HTML validation. Jean Delvare 2005-11-12 08:22:06 +00:00