Commit Graph

  • 94748ae556 Drop A7N8X-X comments from the as99127f section, as we now know this board actually has an ASB100 chip. Jean Delvare 2006-08-27 10:02:31 +00:00
  • 0a50247470 Display it87 VID with 3 decimal places instead of 2. Jean Delvare 2006-08-26 21:33:45 +00:00
  • f1fbe20948 List the upcoming w83793 driver. Be less authoritative when stating a given chip isn't a sensor. Jean Delvare 2006-08-25 19:59:29 +00:00
  • e4d77291b1 Update copyright years. Jean Delvare 2006-08-25 14:07:28 +00:00
  • 9ac1c6caa0 Clean up the PCI device probing, reducing complexity from O(N^2) to O(N). Jean Delvare 2006-08-25 14:00:59 +00:00
  • 8c235d29a9 Add userspace support for the Winbond W83793. Patch contributed by Yuan Mu (Winbond.) Jean Delvare 2006-08-24 18:13:20 +00:00
  • 3927246f86 sensors-detect: Simplify detection of SiS5595, VIA686 and VT8231. Jean Delvare 2006-08-23 18:52:46 +00:00
  • 286ac67733 Adjust the user interaction messages (ISA bus versus ISA ports, remove word I2C from chip drivers comment) Rudolf Marek 2006-08-23 18:19:58 +00:00
  • 751f337660 sensors-detect: Add AMD K8 thermal sensors detection. Jean Delvare 2006-08-23 18:14:09 +00:00
  • 62365c568b Update. Jean Delvare 2006-08-23 15:10:10 +00:00
  • b963378e7f sensors-detect: Add Intel ICH8 detection. Jean Delvare 2006-08-23 14:41:42 +00:00
  • 9211675e5e Winbond donated an Asus P4P800-X motherboard with a Pentium 4 2.8 GHz, heatsink and fan, and two 256 MB DDR SDRAM PC3200 memory modules. The board has a Winbond W83627THF chip for hardware monitoring, and an (hidden) 82801EB (ICH5) SMBus controller with SPD EEPROMs connected. Jean Delvare 2006-08-22 16:55:46 +00:00
  • f7fb55a8a8 Revert previous Makefile change (Silent errors on missing dependency files) as it appears to break with GNU make 3.81. Jean Delvare 2006-08-20 08:46:38 +00:00
  • 6e87587ac6 Add support for k8temp driver Rudolf Marek 2006-08-19 15:31:02 +00:00
  • 9aaa09c40e Add PCI bus support - forgot to commit with last changeset Rudolf Marek 2006-08-19 15:29:55 +00:00
  • 3027d75a12 Add PCI bus support Rudolf Marek 2006-08-19 15:23:10 +00:00
  • a73b6b8ac6 doc/developers/sysfs-interface: Update. Jean Delvare 2006-08-19 09:03:52 +00:00
  • 2396d5cab7 Enhance w83791d support. Add output for in7, in8, in9, fan4 and fan5. Also update to display the (beep) properly due to the fact that the w83791d beep enable mask is different than the alarm mask. Patch from Sven Anders and Charles Spirakis. Jean Delvare 2006-08-18 16:06:55 +00:00
  • 0d15763f81 Restore errors on it87 in3 and in7, I misread the datasheets, these inputs are always present, although different pins may be used. Jean Delvare 2006-08-13 14:28:30 +00:00
  • e554f90d33 Rewrite the bank switching code in a slightly different way to keep some compilers quiet. Jean Delvare 2006-08-12 21:02:54 +00:00
  • c8ae77bdc6 No error on missing it87 in3, in5, in6 or in7. These inputs are shared with other functions on some IT87xxF variants so the Linux 2.6 driver may not present them forever. Jean Delvare 2006-08-12 18:03:13 +00:00
  • 79a7acacec Fix the detection function calls, so that we no more need to declare these functions separately. Jean Delvare 2006-08-11 12:42:52 +00:00
  • 9bebd47af0 Rename "DDC monitor" to "EDID EEPROM" so users don't think it has anything to do with hardware monitoring. Jean Delvare 2006-08-11 12:26:16 +00:00
  • 00980f98fd i2c-isa will soon be gone. Jean Delvare 2006-08-11 07:34:32 +00:00
  • 0e3ba1d1a1 Add support for the ITE IT8718F Super-I/O chip (prefix: it8718). Unsurprisingly, it is very similar to the IT8716F. Jean Delvare 2006-08-09 07:20:54 +00:00
  • 45bc29eb71 More .PHONY targets. Jean Delvare 2006-08-09 06:55:59 +00:00
  • c352815e5d Some more it8716 voltage configuration. Jean Delvare 2006-08-09 06:51:06 +00:00
  • 0d09dd4dfe sensors-detect: Check i2c adapter functionalities before probing, so that we don't use SMBus transactions the adapter doesn't support. This could be extended to the transactions used during detection itself. Jean Delvare 2006-08-09 06:45:48 +00:00
  • 6e2060e7ad sensors-detect: Drop the ISA IT87xxF detection. Super-I/O detection is more reliable. Jean Delvare 2006-08-08 07:01:40 +00:00
  • ec617129c6 Detect the upcoming IT8718F Super-I/O chip. Support will most certainly go into the it87 driver at some point. Jean Delvare 2006-08-04 11:42:52 +00:00
  • 79817f34ce Add support for the IT8716F (prefix it8716). It is mostly similar to the IT8712F so there's not much to do. The most significant difference is that fan speeds are now reported as 16-bit values, without fan clock dividers. For this reason, I made the fan_divs optional in sensors. I also made the fans themselves optional, as I noticed that a number of motherboards don't use (and don't enable) fan3. Jean Delvare 2006-08-03 20:28:20 +00:00
  • 0da02179e0 Kill some dead code, which dealt with the case where a driver probes less I2C addresses by default than the script itself does. The feature was never used, and I don't think it's particuarly useful, so removing it for simpler code makes sense. Jean Delvare 2006-08-02 19:53:20 +00:00
  • a526a4a690 Check for fscanf() failure when reading sysfs attributes. Also drop a redundant return. Jean Delvare 2006-08-01 09:48:42 +00:00
  • 4c211d81d9 prog/dump/*.c, prog/detect/*.c: Handle possible error in fgets(). Jean Delvare 2006-08-01 09:46:50 +00:00
  • dd7848c788 Typo fix, thanks to Brian C for reporting. Jean Delvare 2006-07-29 16:21:54 +00:00
  • b7ba72c716 sensors-detect: Do not scan i2c-isa as if it were a regular i2c bus. Jean Delvare 2006-07-29 16:05:13 +00:00
  • 22e6b03e94 sensors-detect: Get driver information for busy addresses from sysfs (2.6 only). Jean Delvare 2006-07-29 15:58:26 +00:00
  • ff013b4ffd EEPROMs are not sensors. Jean Delvare 2006-07-28 13:58:46 +00:00
  • b040372834 sensors-detect: Add NatSemi/Winbond PC87427 detection. The chip is quite complex and may require a custom detection function. Jean Delvare 2006-07-28 12:20:25 +00:00
  • 9530bd113c sensors.conf: Kill redundant set line in lm85 section. Jean Delvare 2006-07-26 10:02:07 +00:00
  • 0705e4d581 Reformat of lib/access.c: Mark M. Hoffman 2006-07-25 02:12:37 +00:00
  • 05ef6df32d Oops, revert a change which I did not intend to commit at this point. Jean Delvare 2006-07-24 19:38:38 +00:00
  • dee46838bb Makefile: Silent errors on missing dependency files. Jean Delvare 2006-07-24 19:34:09 +00:00
  • adf4130ad1 Pending update. Jean Delvare 2006-07-23 14:57:38 +00:00
  • e8e2f84152 Add the IT8716 detection Rudolf Marek 2006-07-12 18:06:34 +00:00
  • 2b7ecb1f9b Drop duplicate udevdb file test. Jean Delvare 2006-07-04 22:05:35 +00:00
  • 74a7992f19 Transion to new website, part2 - move more links, fix the CVS->SVN Rudolf Marek 2006-07-02 20:15:09 +00:00
  • 7e1836636c Migrate links to new site and system Rudolf Marek 2006-07-02 19:50:05 +00:00
  • d3fa65e9f6 sensors-detect: Add AMD Geode devices detection Jean Delvare 2006-06-23 21:37:40 +00:00
  • 47bd9a6501 Various cleanups to the i2c-i801 driver: * Fix self file name reference. * i801_setup can be marked __devinit. * Drop useless error local variable and label in i801_setup. * Use symbolic names for SMBHSTCFG bits. * Transmit the error code returned by i801_setup instead of forcing it to an arbitrary value. Jean Delvare 2006-06-23 21:05:37 +00:00
  • 21a1be7e49 i2c-i801: Remove PCI function check Jean Delvare 2006-06-23 19:10:41 +00:00
  • d98d0c0185 i2c-i801: Fix block transaction poll loops Jean Delvare 2006-06-23 18:39:51 +00:00
  • 4538a94a5f Revert the last bus hang fix. Further research neccessary. Rudolf Marek 2006-06-23 17:43:54 +00:00
  • 97dd8eeac4 One more motherboard confirmed to have an LM83 temperature sensor chip. Thanks to Steven Hardy for reporting. Jean Delvare 2006-06-23 17:10:55 +00:00
  • ddbf42960f sensors-detect: Add nForce4 MCP04, MCP51 and MCP55 detection Jean Delvare 2006-06-23 16:00:04 +00:00
  • 0ed4b1e3f3 Add support for the new nForce4 MCP51 (also known as nForce 410 or 430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes were required because the base I/O address registers have changed in these versions. Standard BARs are now being used, while the original nForce2 chips used non-standard ones. (2.6 backport) Jean Delvare 2006-06-23 15:53:26 +00:00
  • cff7834fe4 Properly document on which systems the i2c-piix4 SMBus driver will refuse to load. Hopefully this will make it clearer for users, which were often wondering why their destop or server systems were detected as laptops. Jean Delvare 2006-06-23 15:08:03 +00:00
  • 22fb337837 Fix typo. Jean Delvare 2006-06-23 14:40:36 +00:00
  • 4e98d0d9f2 i2c-piix4: Drop the fix_hstcfg parameter (2.6 backport) Jean Delvare 2006-06-23 14:36:15 +00:00
  • c33a248478 i2c-piix4: Add ATI IXP200, IXP300, IXP400 support (2.6 backport) Jean Delvare 2006-06-23 13:45:08 +00:00
  • 39ee1091d0 Add lm82 features table. Jean Delvare 2006-06-23 13:36:03 +00:00
  • c7ce94770a lm83: Add LM82 support (2.6 backport) Jean Delvare 2006-06-23 13:16:09 +00:00
  • b78bf75922 sensors-detect: Handle the W83791D driver difference between kernels. Patch from Charles Spirakis. Jean Delvare 2006-06-18 16:53:02 +00:00
  • 7d09149f50 Fix my stupid error (par was missing) Rudolf Marek 2006-06-18 16:42:31 +00:00
  • 0e29665c65 Backport of 2.6 - Workaround the controller hang Rudolf Marek 2006-06-06 16:32:41 +00:00
  • 3c3999f9f0 lib/sysfs.c: Fix no sensors being reported as an error. Jean Delvare 2006-06-06 11:23:59 +00:00
  • 3098b38071 w83792d: Fix PWM range. Backport from Linux 2.6, patch from Yuan Mu. Jean Delvare 2006-06-05 08:06:27 +00:00
  • e6ba14f1bf i2c-viapro.c: Move definition of PCI IDs before they are used. This fixes compilation with old kernels (2.4.20 and earlier). Thanks to Yuan Mu for reporting. Jean Delvare 2006-06-05 07:55:07 +00:00
  • 0fc147568d Drop out-of-date comment. Jean Delvare 2006-06-04 06:30:04 +00:00
  • b74c06f0f2 prog/sensors/chips.c: Fix a memory leak in print_unknown_chip. Jean Delvare 2006-06-03 09:22:10 +00:00
  • e00d3dc353 Add W83627DHG, add the revision of W83627EHF (0xA1) Rudolf Marek 2006-06-02 20:23:21 +00:00
  • 3643a0b2e0 Add user-space support for abituguru. Patch from Hans de Goede. Jean Delvare 2006-06-02 18:49:23 +00:00
  • dc0f84921f Reflect the W83792D driver update Rudolf Marek 2006-05-31 17:39:49 +00:00
  • 5d81b2b86b Test Axel Thimm 2006-05-31 15:47:13 +00:00
  • c30fbf3475 Test Frodo Looijaard 2006-05-31 15:26:12 +00:00
  • b81de6e42e Fix the subclient handling. Frodo Looijaard 2006-05-31 14:31:01 +00:00
  • 7147ec7daa Comment out all set statements. This should prevent further reports from new users experiencing beeps, instant shutdown etc. when just installing lm_sensors. Jean Delvare 2006-05-27 14:53:31 +00:00
  • 3d72c87970 Let the user know that eeprom support is going away soon. Jean Delvare 2006-05-26 15:33:57 +00:00
  • 1d95c24a0d Nicer header format. Jean Delvare 2006-05-26 11:00:33 +00:00
  • 66636b1aa1 Update. Jean Delvare 2006-05-26 10:48:58 +00:00
  • a0816bd94b SPD revision decoding depends on memory type. Use more user-friendly labels. Fix HTML formatted output on checksum error. Jean Delvare 2006-05-26 10:43:47 +00:00
  • c9d06d5ebc Decode latencies and timings (DDR2 SDRAM). Jean Delvare 2006-05-26 09:55:14 +00:00
  • b80f29c456 Decode size (Direct Rambus and Rambus). At this point, this script provides all the information "sensors" does for SPD eeproms, so we're not so far from dropping eeprom support from sensors. Code cleanups. Jean Delvare 2006-05-26 09:23:10 +00:00
  • 6af2009a02 Fix latencies decoding (SDRAM). Fix CAS latency decoding (DDR SDRAM). Decode latencies, timings and module height (DDR SDRAM). Jean Delvare 2006-05-26 08:39:20 +00:00
  • 5eb8aa161d Add ICH8 support. 2.6 backport Rudolf Marek 2006-05-23 11:23:53 +00:00
  • d785c0ecce Detect undefined manufacturer code and handle it properly. Round up timing data. Minor display adjustments. Group cycle and access times, display the CAS value for each (SDRAM). Refactor some bitfield tests into loops (SDRAM). Display latencies and burst length on a single line (SDRAM). Don't display manufacturing location when undefined. Check that the manufacturing date is proper BCD, else fall back to hexadecimal display. Jean Delvare 2006-05-21 17:39:48 +00:00
  • 4b0db08ea2 Rename some copanies as 106T suggest, but only from 2004. I'm lazy to check and others seems already renamed. Rudolf Marek 2006-05-20 20:29:02 +00:00
  • 53d8879a6f Bump the JEDEC ID codes to version 106T Rudolf Marek 2006-05-20 20:22:49 +00:00
  • 4d2c4fd212 Previous leak fix caused multiple sensors_init() calls to break. This patch fixes that by managing the scanner buffers manually. Mark M. Hoffman 2006-05-20 15:24:37 +00:00
  • 54423af70d Update. Rudolf Marek 2006-05-16 22:12:30 +00:00
  • c3304ead04 Add the size computation for SDRAM, DDR and DDR2 Add the most common timing characteristics of SDRAM/DDR/DDR2 as brief output Rudolf Marek 2006-05-16 22:08:56 +00:00
  • eb7eee8136 Update. Jean Delvare 2006-05-16 08:26:01 +00:00
  • 9a8f962d88 Allow the config file scanner to release its buffers upon EOF. Mark M. Hoffman 2006-05-16 02:14:57 +00:00
  • bda180fcff Don't decode the revision code, manufacturing date and assembly serial number where not set. Decode the manufacturing date to an ISO8601 date. Jean Delvare 2006-05-15 10:52:09 +00:00
  • f7f58f3110 Decode the SPD data depending on the memory type. Only SDRAM is complete for now, DDR and DDR2 need to be extended. Jean Delvare 2006-05-15 10:19:46 +00:00
  • e620cb652c fix 2 leaks found by valgrind - missing some free() during cleanup (as opposed to ongoing run-time leaks) Mark M. Hoffman 2006-05-15 03:06:05 +00:00
  • fd2023d0cf Static semaphores can be initialized at declaration time. This is a backport from Linux 2.6. Jean Delvare 2006-05-14 14:59:37 +00:00
  • c72b364135 Drop a redundant semaphore. The struct i2c_adapter includes a semaphore for the same purpose, operated by i2c-core. This is a backport from Linux 2.6. Jean Delvare 2006-05-14 14:39:50 +00:00
  • 4bab489796 Reset the PEC bit after every transaction. This partly reverts the previous change. This is needed by some BIOSes at reboot and resume time. Jean Delvare 2006-04-22 18:06:49 +00:00
  • 561eb551be Drop unused I2C/SMBus low-level definitions and code. In particular, we really don't want to use SMBus write functions in this script. Jean Delvare 2006-04-22 09:06:21 +00:00