Also update to display the (beep) properly due to the fact that the
w83791d beep enable mask is different than the alarm mask.
Patch from Sven Anders and Charles Spirakis.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4096 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fix self file name reference.
* i801_setup can be marked __devinit.
* Drop useless error local variable and label in i801_setup.
* Use symbolic names for SMBHSTCFG bits.
* Transmit the error code returned by i801_setup instead of forcing it
to an arbitrary value.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4061 7894878c-1315-0410-8ee3-d5d059ff63e0
Remove the PCI function number check when probing devices.
This check is redundant, each function has a separate PCI device
ID, so checking for that ID is sufficient.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4060 7894878c-1315-0410-8ee3-d5d059ff63e0
Two of the three poll loops have the poll and sleep swapped,
causing an extra sleep to occur after the polled condition is
fulfilled. In practice, this doubles the amount of sleep time for
every block transaction.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4059 7894878c-1315-0410-8ee3-d5d059ff63e0
430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes
were required because the base I/O address registers have changed in
these versions. Standard BARs are now being used, while the original
nForce2 chips used non-standard ones. (2.6 backport)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4054 7894878c-1315-0410-8ee3-d5d059ff63e0
refuse to load. Hopefully this will make it clearer for users, which
were often wondering why their destop or server systems were detected
as laptops.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4053 7894878c-1315-0410-8ee3-d5d059ff63e0
This fixes compilation with old kernels (2.4.20 and earlier). Thanks
to Yuan Mu for reporting.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4039 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch enables the reading of temp1 (Reading3) from the VT1211.
Reading3 returns the V1211's internal temperature.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3246 7894878c-1315-0410-8ee3-d5d059ff63e0
functions being called before their actual definition. Thanks to Greg
Kroah-Hartman for the report.
Also, drop an unused lock.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3225 7894878c-1315-0410-8ee3-d5d059ff63e0
explicitly before each transaction. Backport from Linux 2.6, original
patch from Mark M. Hoffman.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3221 7894878c-1315-0410-8ee3-d5d059ff63e0
on globals. The resulting code is slightly more compact too (both source
and compiled binary).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3213 7894878c-1315-0410-8ee3-d5d059ff63e0
from Linux 2.6:
* Fan inputs 4, 5, 6 and 7 can be disabled.
* Simplify voltage reading code.
* Simplify and inline w83792d_{read,write}_value.
* Drop unused lock.
* Make needlessly global functions static.
* Fix the bug where tolerance 2 and tolerance 3 can not be set.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3209 7894878c-1315-0410-8ee3-d5d059ff63e0
"(...) I found what I think is a bug in the it87_fan_div setting code.
(...) What was happening was that the check to make sure the third fan's
divisor was either 2 or 8 was using the wrong member of the it87 data
structure. This was causing the if to never fail and thus always force
the divisor to 2."
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3200 7894878c-1315-0410-8ee3-d5d059ff63e0
in line with the new 2.6 driver. The most important changes are temp
inputs renumbering, and conversion formulas changes, because part of the
conversions are now done by the driver as required by the interface
standard.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3194 7894878c-1315-0410-8ee3-d5d059ff63e0
VRM for all drivers. Same was done it Linux 2.6 some times ago.
Also comment out all "set vrm" lines in sensors.conf.eg, as Linux 2.6
now accurately deduces the VRM from the CPU model.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3190 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fix in4 reading on W83627THF and W83637HF.
* Use the right registers for alarms.
* Preserve fan min when setting fan div.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3184 7894878c-1315-0410-8ee3-d5d059ff63e0
Add PEC support to the lm90 driver. Only the ADM1032 chip supports it,
and in a rather tricky way, which is why this patch comes with
documentation reinforcements. At least, this demonstrates that the new
PEC support logic in i2c-core can properly deal with chips with partial
PEC support.
As enabling PEC causes a significant performance drop, it can be
disabled through a procfs file (unsurprisingly named "pec").
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3181 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare