<klh@google.com> received Sept. '04.
No changes by me other than include file path fixups.
Compiles, but will not insmod without i2c-core changes
or stubs to add xxx_nolock() functions.
-----------------
Here you go. I apologize for the fact this code is not integrated
into the lm_sensors package structure and thus will require you to
make various little updates. But I really wanted to get this out
before I'm yanked away again, and am pretty sure you can do it much
faster than I can figure out what needs to be done!
BTW the kernel files are built against 2.4.x where x varies; 18 and 19
should work.
Feel free to clean up anything.
--Ken
On Sat, 18 Sep 2004, Mark Studebaker wrote:
>>> > On Tue, 7 Sep 2004, Mark Studebaker wrote:
>>
>>>> >>sure, send it over.
>>>> >>Sorry for delay, your mail got buried by other mail and just now spotted it.
>>>> >>mds
>>>> >>
>>>> >>Ken Harrenstien wrote:
>>>> >>
>>>
>>>>> >>>It turned out to be a while before I could get back to this, but
>>>>> >>>everything's been working for a while now and I'd like to send in the
>>>>> >>>new pca954x driver.
>>>>> >>>
>>>>> >>>I was looking at the list in the "new_drivers" file -- it *is* kind of
>>>>> >>>intimidating. Since some of the changes affect core i2c files, I was
>>>>> >>>hoping that what I could do to start with is just send you a tar of
>>>>> >>>the modified files in their entirety, or a patch-diff of the changes
>>>>> >>>against the 2.8.7 distribution, so you can scope things out and verify
>>>>> >>>they're on the right track for acceptance. The following files are
>>>>> >>>the ones I've changed so far:
>>>>> >>>
>>>>> >>> New:
>>>>> >>> Documentation/i2c/virtual_i2c
>>>>> >>> drivers/i2c/i2c-virtual.c
>>>>> >>> drivers/sensors/pca954x.c
>>>>> >>> include/linux/i2c-virtual.h
>>>>> >>> Patched:
>>>>> >>> Documentation/Configure.help
>>>>> >>> drivers/i2c/Makefile
>>>>> >>> drivers/i2c/Config.in
>>>>> >>> drivers/i2c/i2c-core.c
>>>>> >>> drivers/sensors/Makefile
>>>>> >>> drivers/sensors/Config.in
>>>>> >>> include/linux/i2c-id.h
>>>>> >>> include/linux/i2c.h
>>>>> >>>
>>>>> >>>
>>>>> >>>I plan to write some additional doc once I know that the code itself
>>>>> >>>is acceptable, and you then can tell me what other files need to be
>>>>> >>>updated.
>>>>> >>>
>>>>> >>>To answer a couple other issues you raised:
>>>>> >>>
>>>>> >>>On Thu, 24 Jun 2004, Mark Studebaker wrote:
>>>>> >>>
>>>>> >>>
>>>>> >>>
>>>>
>>>>>> >>>>(copying the mailing list, already forwarded the first mail to the list)
>>>>>> >>>>
>>>>>> >>>>First I want to ask whether you are working on kernel 2.4 or 2.6.
>>>>
>>>>> >>>
>>>>> >>>
>>>>> >>>2.4.
>>>>> >>>
>>>>> >>>
>>>>> >>>
>>>>
>>>>>> >>>>Third, you may not have realized that Khali recently did a (2.4 kernel) pca9540 driver.
>>>>>> >>>>It is in our sensors package. It however doesn't do any of the bootstrapping or
>>>>>> >>>>bus registering either. It may or may not help you.
>>>>
>>>>> >>>
>>>>> >>>
>>>>> >>>I saw it in the 2.8.7 distrib, and used parts of it as a template.
>>>>> >>>The pca954x driver will support that chip, although the external /proc
>>>>> >>>interface it presents is necessarily different.
>>>>> >>>
>>>>> >>>--Ken
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2765 7894878c-1315-0410-8ee3-d5d059ff63e0
patch from Ken Healy <k.healy@student.ucc.ie>
This patch experimentally enables SiS 655 support by the i2c-sis645 driver.
It simply modifies the driver to also accept the SiS 655 as a valid host
bridge.
Partially tested on a Gigabyte GA-SINXP1394 (SiS655/963), no problems so far.
Driver successfully enables the SMBus controller, i2cdetect finds the usual
devices, and i2cdump successfully reads the DIMM SPD eeprom's.
The patch is against the lm_sensors-2.8.5 release.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2415 7894878c-1315-0410-8ee3-d5d059ff63e0
Vojtech Pavlik <vojtech@suse.cz>
Implemented/fixed PEC and process calls, and block reads/writes in
the driver. ARP now works with smbus-arp.c.
Removed attempt at 2.2 support. Module doesn't work w/ 2.2 kernels.
Added check in Module.mk so it won't compile unless CONFIG_X86_64.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1656 7894878c-1315-0410-8ee3-d5d059ff63e0
'supported' table. i2c adapter name and io region will
always be piix4 now - too hard to do 5 different names.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1188 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare