Commit Graph

  • 4f0e6bf18b really fix sensors so that it recognizes all maxilifes. didn't work last time. Mark D. Studebaker 2001-05-15 02:40:36 +00:00
  • d9108ed634 fix fan min writes, fix spurious 'invalid sensor type' messages. Patch from Kris Van Hees. Mark D. Studebaker 2001-05-13 17:09:13 +00:00
  • ccc4844d60 add maxilife-nba to doc, note that sensors-detect does not support. Mark D. Studebaker 2001-05-13 16:44:32 +00:00
  • 3cbc853100 Add support for maxilife-nba by just checking for "maxilife-" prefix. Mark D. Studebaker 2001-05-13 16:32:50 +00:00
  • e8392e8abc add function prototype for print_lm87() to eliminate warning. Mark D. Studebaker 2001-05-13 16:32:02 +00:00
  • 59b1cf2bb8 (Phil) Added a 'how-to' document from Tomi Ollila to the end for instructions on how to use the BT869 driver with a PAL TV, an X windows server, and kernel 2.4.4. Philip Edelbrock 2001-05-03 21:00:33 +00:00
  • 4af866b0bf try to clarify guidance on i2c package requirements Mark D. Studebaker 2001-04-28 17:51:48 +00:00
  • 627466ee11 change upper case LM87 to lower case throughout, again, hopefully for the last time. Had an undefined LM87_init in the kernel patch. Mark D. Studebaker 2001-04-22 23:44:27 +00:00
  • c5469c2285 change from gl520sm_init() to gl520_init() to match what is in driver so patched kernel will work with gl520. Mark D. Studebaker 2001-04-22 23:27:23 +00:00
  • 43500d6139 fix off-by-one bug in sensor type reads/writes in mtp008. you would get the wrong sensor. Mark D. Studebaker 2001-04-21 22:52:34 +00:00
  • 448343fd11 add short i2c-sis5595 doc file. Mark D. Studebaker 2001-04-21 22:09:46 +00:00
  • 79c341d475 add support for force_addr to i2c-sis5595. Also automatically enable ACPI if it was disabled. Forcing address doesn't work on my test system, but hey, at least I tried to test it... Mark D. Studebaker 2001-04-21 21:57:40 +00:00
  • 25d40a14dd add force_addr param to sis5595. Tested, however on my test system I can't write the enable bit. Don't know why. Mark D. Studebaker 2001-04-21 20:54:47 +00:00
  • 236c7efced fix force comments more. Mark D. Studebaker 2001-04-21 20:53:16 +00:00
  • e4ed326c80 fix comments Mark D. Studebaker 2001-04-21 20:03:07 +00:00
  • de2652db9e Change base-address-setting parameter from force or force_via686a to force_addr. It is now consistent with the bus PCI adapters that support base address setting (piix4, i801, viapro). Other benefit is that via686a_find can now return -ENODEV, and module will fail to load when base address is not set and parameter is not used. Mark D. Studebaker 2001-04-21 19:49:15 +00:00
  • da40be7ab2 correct example temperature limits in lm78 section Mark D. Studebaker 2001-04-15 15:32:05 +00:00
  • f37df45b21 add quotes around mtp008-x-y-z templates Mark D. Studebaker 2001-04-14 18:07:44 +00:00
  • ffedd9fa93 add back temperature support for version 1 of chip. The temperature registers are in different places for the two versions. Both versions unfortunately have the same PCI ID. Apparently the temperature conversion formulas are different for the two versions. Neither is yet implemented in the driver. Mark D. Studebaker 2001-04-14 01:39:10 +00:00
  • 2dc8cc9b41 fix the following bug. Caused by 'new PCI drivers' which have the name of the driver appended as the 18th field in /proc/bus/pci/devices. For example, usb-ohci. sensors-detect was attempting to parse this as a hex value. From: Anthony Wong <ypwong@ypwong.org> Date: Fri, 23 Feb 2001 19:23:56 +0800 To: Debian Bug Tracking System <submit@bugs.debian.org> Subject: Bug#87213: "Illegal hexadecimal digit" errors when running sensors-detect Reply-To: Anthony Wong <ypwong@ypwong.org>, 87213@bugs.debian.org Mark D. Studebaker 2001-04-12 23:55:53 +00:00
  • 0ac4a8d35b in4 fixes + more cleanup Mark D. Studebaker 2001-04-10 01:47:56 +00:00
  • bea2bbf99e fix sis5595 temp (and temp min, max, alarm). These registers are in a different place than the LM78, which this driver was copied from, so temp was completely broken. Temp shares a pin and registers with in4; add in4 support, recognize chip configuration and act accordingly. Mark D. Studebaker 2001-04-09 23:20:13 +00:00
  • fd3fdb2c25 sis5595 doc updates Mark D. Studebaker 2001-04-09 23:11:53 +00:00
  • 28e81cce5a fix sis5595 temp alarm bit location Mark D. Studebaker 2001-04-09 22:55:19 +00:00
  • 18305cfc54 add in4 for sis5595 to library Mark D. Studebaker 2001-04-09 22:52:28 +00:00
  • dfa4655bad update Mark D. Studebaker 2001-04-07 21:07:08 +00:00
  • b5d7bfa37c add gsensor and rrdtool. Mark D. Studebaker 2001-04-07 20:19:55 +00:00
  • 5714bf8c80 cleanup, add summary graphs Mark D. Studebaker 2001-04-07 18:58:59 +00:00
  • 5c68f1dcec minor updates Mark D. Studebaker 2001-04-04 23:42:12 +00:00
  • 191f7240ed add example chip names to long help, it wasn't obvious. Mark D. Studebaker 2001-04-04 23:22:40 +00:00
  • b7ade0b926 fix bug in lm84 and gl523sm support; driver would recognize the chip and then return an error code anyway. Mark D. Studebaker 2001-04-04 23:12:34 +00:00
  • 6c52f4b47f add i2cset, simple utility to write a single location in an i2c device, good for debugging. Mark D. Studebaker 2001-04-03 02:39:23 +00:00
  • a653703b6e add back missing paren from LTC change oops Mark D. Studebaker 2001-04-03 02:38:05 +00:00
  • c4be590ca6 update for devfs /dev/i2c/x devices Mark D. Studebaker 2001-03-31 19:19:31 +00:00
  • 030053643c add devfs /dev/i2c/x support Mark D. Studebaker 2001-03-31 19:07:09 +00:00
  • 0709b19497 add devfs /dev/i2c/x support Mark D. Studebaker 2001-03-31 19:00:45 +00:00
  • 006d4302b4 first cut at scripts to make the difficult RRD database package usable to collect and display sensors data. Think 'tellerstats' on steroids. Mark D. Studebaker 2001-03-31 04:53:45 +00:00
  • c231b53a57 the famous "tellerstats" package of Phil's with updates from me and Hans Ecke <hans@ecke.ws>. Intent is a simple package which can be customized, configured, and installed easily. Mark D. Studebaker 2001-03-31 04:50:25 +00:00
  • cf3d81cc76 add rrd and tellerstats info Mark D. Studebaker 2001-03-31 04:11:18 +00:00
  • f03fc688a2 fix message about what mode you are in - used to always say i2c block rather than byte or word. Mark D. Studebaker 2001-03-31 01:55:54 +00:00
  • 338d695ef9 remove LTC1710 from mkpatch - unlikely to be needed on a PC Mark D. Studebaker 2001-03-31 01:40:53 +00:00
  • 3d93decf6a print-short-help after parse error in chip name Mark D. Studebaker 2001-03-25 18:28:15 +00:00
  • 7ec3504922 update to quickstart instructions for m7101 Mark D. Studebaker 2001-03-24 18:50:22 +00:00
  • af51f14cb8 move a couple of lines around Mark D. Studebaker 2001-03-24 18:35:13 +00:00
  • 9839d59d7f Expanded the README a little bit. Frodo Looijaard 2001-03-23 20:34:27 +00:00
  • 8cd4e82598 Added a warning in sensors-detect for IBM Thinkpad owners. Frodo Looijaard 2001-03-23 20:27:31 +00:00
  • c67cf14f7e (Phil) This is the best method I can think of to warn Thinkpad users of possible eeprom corruption. Feel free to edit or move this warning into another file if there is a better solution. Philip Edelbrock 2001-03-20 18:14:13 +00:00
  • 8af1191dd9 (Phil) Updates and a couple new entries. Philip Edelbrock 2001-03-20 18:05:02 +00:00
  • 0a8aee470a documentation updates on eeproms Mark D. Studebaker 2001-03-20 03:22:49 +00:00
  • cddd0a915e Don't reset the as99127f chip at startup. This may improve things that are configurable as we will count on the BIOS to configure the chip correctly. This will likely change fan and temperature readings for some users. Mark D. Studebaker 2001-03-20 01:46:44 +00:00
  • 805a7e7d94 add a sample configuration for the Tyan 2510 board which has two (differently-connected) MTP008 chips. Mark D. Studebaker 2001-03-20 01:44:39 +00:00
  • 53befd189c use normal_i2c[] instead of normal_i2c_range[] since only one address. Mark D. Studebaker 2001-03-19 23:56:55 +00:00
  • d8d09c259e Add SiS950 as equivalent to ITE87xx. Mark D. Studebaker 2001-03-08 00:55:18 +00:00
  • 08883f7958 add entry for dual lm87's requiring different configuration Mark D. Studebaker 2001-02-25 00:45:28 +00:00
  • 448fe0c52c add adm9240/ds1780/lm81 template, add quotes to feature names in lm87 template where necessary. Mark D. Studebaker 2001-02-24 21:57:42 +00:00
  • a732171e1d Update doc about preserving mtp008 pin configuration. Mark D. Studebaker 2001-02-23 03:34:21 +00:00
  • db52f427a6 Change mtp008 temperature reporting from max/min to limit/hyst. Change initial values in driver from 70/5 to 70/50. Mark D. Studebaker 2001-02-23 03:23:49 +00:00
  • d820ceef3e add some more comments on temp_hyst and temp_over. Mark D. Studebaker 2001-02-23 03:15:25 +00:00
  • 6b9ce051d3 preserve pin settings from registers 0x57 and 0x58 at startup. These select fan type (2 or 3 wire) as well as temp sensor type (thermistor or diode) and temperature vs. voltage sensing for two pins. This should help those on various Tyan mobos. Driver used to reset the chip and then program a fixed setting which worked for the Tyan S1824D board but not for Tyan 2510. Mark D. Studebaker 2001-02-23 01:06:07 +00:00
  • f8287b30bd fix swapped limit and hysteresis on adm9240, sis5595, and via686a. Thanks Karl Schmidt <karl@xtronics.com> Mark D. Studebaker 2001-02-23 01:02:35 +00:00
  • f7859cbe88 Correct and add good explanation of lm80 temp limits. Mark D. Studebaker 2001-02-20 02:47:09 +00:00
  • e857e53a32 yet more updates Mark D. Studebaker 2001-02-20 02:30:24 +00:00
  • 11a8bf78fa renamed i2c_i810i2c_init() to i2c_i810_init() to match what mkpatch patches in patched kernel. Affected only kernel patches; standalone build was fine. Ticket # 492. Mark D. Studebaker 2001-02-20 02:12:39 +00:00
  • d71110b4ad change mtp008 entries from fan[1-3]_limit to fan[1-3]_min to be identical to other drivers. Mark D. Studebaker 2001-02-11 19:54:23 +00:00
  • 1d1859040b Added -p/--pid-file option to write a PID file for the daemon and -d/--debug option to allow unwanted information to be more easily suppressed. Kicked version to 0.5.0. -- merlin@merlin.org Merlin Hughes 2001-02-11 18:51:24 +00:00
  • 0f1417afc7 add full lm87 template since names are non-standard Mark D. Studebaker 2001-02-10 22:35:19 +00:00
  • eac7c14bb1 fix the names in some lm87 entries in libsensors Mark D. Studebaker 2001-02-10 22:30:21 +00:00
  • b799b5e41e fix temp2 max initialization (70 instead of 7) Mark D. Studebaker 2001-02-10 22:07:17 +00:00
  • 95003a7c4b format help a little better at top of sensors.conf, add temp limit example. Mark D. Studebaker 2001-02-10 20:14:52 +00:00
  • 108415353f remove CVS >>> thingie Mark D. Studebaker 2001-02-10 20:13:23 +00:00
  • 77218c4438 new as99127f calculations for in5 and temp2 from Guntram Blohm <gbl@bso2001.com> Mark D. Studebaker 2001-02-10 04:53:24 +00:00
  • b572be348b add clarification on Xeon support in adm1021 driver. Mark D. Studebaker 2001-02-10 04:15:54 +00:00
  • e0ffc6af20 add missing force_xxx documentation; work on as99127f section. Mark D. Studebaker 2001-02-10 03:37:50 +00:00
  • b5d014bd46 Disable sensors.c and i2c-isa.h in the Module.mk files. Leave the files there for now. Remove old installed sensors.o in kernel/Module.mk. sensors.c was moved to i2c-proc.c in the i2c package. i2c-isa.h was appended to i2c.h in the i2c package. Delete all but the SYSCTL and ALARMS definitions in sensors.h, as the rest of the file was moved to i2c-proc.h in the i2c package. Remove #include "i2c-isa.h" lines in all chip drivers and in bus driver i2c-isa.c. This all probably breaks mkpatch. Mark D. Studebaker 2001-02-06 02:53:46 +00:00
  • fa761437c0 add the missing Configure.help entries Mark D. Studebaker 2001-02-05 00:02:45 +00:00
  • 60c24768b1 recognize SMSC Victory66 south bridge. No driver support yet. Looks identical to piix4 so we can add to i2c-piix4. Mark D. Studebaker 2001-02-04 23:24:03 +00:00
  • 9d24d79ca5 Better notes about mkpatch not working on 2.3 kernels Frodo Looijaard 2001-02-04 11:43:09 +00:00
  • 377be956da PCI chip detection cleanup. Mark D. Studebaker 2001-02-03 20:48:43 +00:00
  • b4b343d74b claim support for Via 686B. Same PCI id as 686A. No driver changes. Mark D. Studebaker 2001-02-03 19:22:54 +00:00
  • 373257612a have 'sensors -v' display LM_VERSION from the top level version.h instead of the static '1.3', which we don't regularly change. Mark D. Studebaker 2001-01-31 03:51:06 +00:00
  • d05db74dd6 add dogsled and lcd4linux Mark D. Studebaker 2001-01-27 23:37:08 +00:00
  • c9ab8617c8 add thermal, gpdial_applet, www.temperatures.com Mark D. Studebaker 2001-01-27 22:33:56 +00:00
  • b9b1a902be Adjust -12V as99127f calculation +15% based on empirical data. Still no datasheet. Mark D. Studebaker 2001-01-27 20:33:09 +00:00
  • a99826ad8e update Mark D. Studebaker 2001-01-27 19:41:25 +00:00
  • 9a613b219c FAQ update Mark D. Studebaker 2001-01-27 19:25:28 +00:00
  • b45b65a9dc (Phil) Scales adjustment. Needs to be tested and confirmed. Philip Edelbrock 2001-01-26 17:53:15 +00:00
  • 4b88cf7071 (Phil) Fixed typo/copy-and-paste error for reading AIN2. Philip Edelbrock 2001-01-26 17:26:20 +00:00
  • 9760842745 significant updates. Last real update was over a year ago. Still more to do. Mark D. Studebaker 2001-01-21 23:33:29 +00:00
  • 5eefa0ff3d general update. Add more datasheet refs, alphabetize. Add sensor sweep applet, afsatm, and afstavm links. Mark D. Studebaker 2001-01-21 20:47:56 +00:00
  • 899498a9b4 Allow force and force_via686a parameters. Driver will take the address and program the base address in the 686a. This is NOT a PCI force; the 3057 device must be present in lspci. Should work for Asus A7V/K7V boards which don't set the base address (because they also have a as99127f on them!??). Some rough edges remain, because via686a_find() does not know there is a force; that only is apparent to via686a_detect(). Notably, the driver will stay loaded even if the address is uninitialized and there is no force; also, the driver complains that a force is needed even when you give it one. Mark D. Studebaker 2001-01-20 03:43:50 +00:00
  • c2b81edc8a recognize lm78's with chipid register (0x49) == 0x20, as reported by Vernon McPherron <vernon@xnote.com> Mark D. Studebaker 2001-01-19 02:39:26 +00:00
  • d569353d79 add xxx_init() calls to bottom of sensors.c for those drivers added to mkpatch in 2.5.5. Also add mtp008 and ds1621 init calls in anticipation of them being added. Fix typos adm9024->adm9240. Mark D. Studebaker 2001-01-17 01:42:56 +00:00
  • 16bf6df6a7 correct typos adm9024 -> adm9240. Mark D. Studebaker 2001-01-17 01:38:16 +00:00
  • 6df75c8373 add info on adding support for new drivers to mkpatch. Mark D. Studebaker 2001-01-17 01:21:56 +00:00
  • 5de72e7309 This commit was manufactured by cvs2svn to create tag 'V2-5-5'. V2-5-5 Frodo Looijaard 2001-01-16 03:27:51 +00:00
  • 44ea61ed74 (Phil) Tag and release 2.5.5 Philip Edelbrock 2001-01-16 03:27:51 +00:00
  • 4cf7872afa Fix comment about 1st arg to mkpatch is sensors root, not i2c root. Thanks Chris Karakas. Mark D. Studebaker 2001-01-15 00:07:58 +00:00
  • fc13775163 add static to 2 structs to remove external symbols. Mark D. Studebaker 2001-01-13 17:58:47 +00:00
  • 457efe73b7 add correct ifdef'ed declaration of i2c_i801_init() to remove external symbol. Mark D. Studebaker 2001-01-13 17:54:36 +00:00
  • 235cc1d959 misc. cleanup Mark D. Studebaker 2001-01-13 17:28:32 +00:00