measured voltage value are now named inX_input, not just inX, but the
default configuration file was not properly updated to reflect this. This
caused errors to be displayed by "sensors" for the g520sm, lm80 and pc87366
chips. Reported by Aurelien Jarno.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@5076 7894878c-1315-0410-8ee3-d5d059ff63e0
be found, fallback to /etc/sensors.conf. This allows for an old
libsensors and a new libsensors to be installed in parallel, and each
one has its own configuration file.
One important change here is that the default configuration file will
be installed as /etc/sensors3.conf by "make install".
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4990 7894878c-1315-0410-8ee3-d5d059ff63e0
used by sensor chips on the running system, in a format suitable for
sensors.conf. This is a replacement for the old, broken grab_busses.sh
script. Benefits of having this directly in sensors:
* It lists only the i2c buses that are relevant to sensors.
* sensors is installed by default, while most people didn't have
access to grab_busses.sh.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4781 7894878c-1315-0410-8ee3-d5d059ff63e0
moving to a user-space-only package, all the drivers are maintained in
the Linux kernel tree itself.
I tried to update the documentation a bit, but there's still a lot to
go. In fact, a complete rewrite seems to be needed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4397 7894878c-1315-0410-8ee3-d5d059ff63e0
input order to match the Linux 2.6 driver.
libsensors: Change vt1211 temp3-7 magnitude from 1 to 3.
sensors.conf.eg: Adjust the vt1211 section to match the new driver
interface.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4168 7894878c-1315-0410-8ee3-d5d059ff63e0
IT8712F so there's not much to do. The most significant difference is that
fan speeds are now reported as 16-bit values, without fan clock dividers.
For this reason, I made the fan_divs optional in sensors. I also made the
fans themselves optional, as I noticed that a number of motherboards don't
use (and don't enable) fan3.
I've made a separate section (chip "it8716-*") in sensors.conf.eg, because
new motherboards tend to have different wirings (e.g. negative voltage
lines are not monitored) so this will make for saner defaults.
Thanks to Stian Oksavik for testing.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4083 7894878c-1315-0410-8ee3-d5d059ff63e0
reports from new users experiencing beeps, instant shutdown etc. when
just installing lm_sensors.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3312 7894878c-1315-0410-8ee3-d5d059ff63e0
chip "lm85c-*" "adm1027-*" "adt7463-*" "lm85-*" "lm85b-*"
and chip "adm1021-*" "adm1023-*" "max1617-*" "max1617a-*" "thmc10-*"
"lm84-*" "gl523sm-*" "mc1066-*"
The reason for the patch is that the net-snmp lm_sensors extension uses
the label name when determining what type of sensor it is reading, and
as a result, which OID to use as the parent. It uses "V" for volt,
"fan" or "Fan" for fans, and "temp" or "Temp" for temperature. All
other sensors get placed under the "misc" sensors category. Since these
sensors lack "temp" in their labels, they are erroneously placed in the
"misc" category.
Patch provided by: telackey@bozemanpass.com
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3262 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch enables the reading of temp1 (Reading3) from the VT1211.
Reading3 returns the V1211's internal temperature.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3246 7894878c-1315-0410-8ee3-d5d059ff63e0
* Do not scale +3.3V by default, most boards don't need it.
* Add alternate +5V compute line for some Gigabyte boards.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3201 7894878c-1315-0410-8ee3-d5d059ff63e0
in line with the new 2.6 driver. The most important changes are temp
inputs renumbering, and conversion formulas changes, because part of the
conversions are now done by the driver as required by the interface
standard.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3194 7894878c-1315-0410-8ee3-d5d059ff63e0
VRM for all drivers. Same was done it Linux 2.6 some times ago.
Also comment out all "set vrm" lines in sensors.conf.eg, as Linux 2.6
now accurately deduces the VRM from the CPU model.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3190 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare