Commit Graph
58 Commits
Author SHA1 Message Date
Martin Knoblauch bae6eabdd7 (MKN) Adding template for Fujitsu-Siemens Scylla Chip
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1216 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-10-31 19:24:59 +00:00
Mark D. Studebaker 86d44b5869 fix it87 in5,in6 calculations in sensors.conf.eg
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1213 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-10-31 02:53:28 +00:00
Mark D. Studebaker 5b47f249b5 don't ask for via686 contributions any more
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1204 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-10-21 22:51:25 +00:00
Mark D. Studebaker eadb600e4f poseidon fix
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1186 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-09-18 21:04:12 +00:00
Mark D. Studebaker d78cb7b93b Fujitsu Poseidon support from Hermann Jung <hej@odn.de>
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1179 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-09-18 15:20:15 +00:00
Mark D. Studebaker 739a87e785 Apply patch from David Gesswein:
The following patch does the following:

Fixed bug with not all alarms enabled.
Added ability to read battery voltage
Select temperature sensor type at module load time.
Added setting for Inside Technologies 786LCD board to example config file
I also fixed what looked like a typo in the existing it87 section where
in6_min/max was set twice and in7 was not set.  As commented I think
the equation for the negative voltages are wrong but without that motherboard
I can't verify.

With the 786LCD board sensors-detect reports a lm78 which doesn't
exist and a sis5595 which may be part of the SIS630 chip but doesn't
perform the monitoring.  The it8705F/SIS950 which is on the board is
reported as a misdetect.  I didn't know enough about the various chips
to figure out how to get correct detections.

David Gesswein


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1146 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-07-29 00:30:54 +00:00
Mark D. Studebaker da67ebcd0a fix up new sis5595 section. still a work in progress.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1120 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-06-03 23:21:23 +00:00
Mark D. Studebaker 87c529e96d Initial checkin of it87 driver from
Christophe Gauthron <chrisg@0-in.com>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1112 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-06-03 21:58:26 +00:00
Mark D. Studebaker d431a88833 Initial checkin of adm1024 driver and support in libsensors,
sensors, sensors-detect.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1090 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-05-15 03:18:18 +00:00
Mark D. Studebaker da40be7ab2 correct example temperature limits in lm78 section
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1072 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-04-15 15:32:05 +00:00
Mark D. Studebaker f37df45b21 add quotes around mtp008-x-y-z templates
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1071 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-04-14 18:07:44 +00:00
Mark D. Studebaker 805a7e7d94 add a sample configuration for the Tyan 2510 board which has
two (differently-connected) MTP008 chips.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1038 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-03-20 01:44:39 +00:00
Mark D. Studebaker 448fe0c52c add adm9240/ds1780/lm81 template, add quotes to feature names
in lm87 template where necessary.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1034 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-02-24 21:57:42 +00:00
Mark D. Studebaker d820ceef3e add some more comments on temp_hyst and temp_over.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1031 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-02-23 03:15:25 +00:00
Mark D. Studebaker f7859cbe88 Correct and add good explanation of lm80 temp limits.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1028 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-02-20 02:47:09 +00:00
Mark D. Studebaker 0f1417afc7 add full lm87 template since names are non-standard
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1023 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-02-10 22:35:19 +00:00
Mark D. Studebaker 95003a7c4b format help a little better at top of sensors.conf,
add temp limit example.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1020 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-02-10 20:14:52 +00:00
Mark D. Studebaker 77218c4438 new as99127f calculations for in5 and temp2 from
Guntram Blohm <gbl@bso2001.com>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1018 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-02-10 04:53:24 +00:00
Mark D. Studebaker b9b1a902be Adjust -12V as99127f calculation +15% based
on empirical data. Still no datasheet.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1006 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-01-27 20:33:09 +00:00
Mark D. Studebaker adc2460453 add comments on 'ignore' usage
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@987 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-01-13 17:09:47 +00:00
Mark D. Studebaker 6dadf068b2 (mds) add adm1025 entries
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@938 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-11-30 02:39:06 +00:00
Mark D. Studebaker 4dcb88898c (mds) MTP008 driver patch from Kris Van Hees.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@909 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-10-18 00:34:07 +00:00
Bob Dougherty d620f2c724 (bob dougherty) Fixed typos. :)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@906 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-10-16 16:44:23 +00:00
Bob Dougherty 141d391ef7 (bob dougherty) Added comments from Johannes Drechsel-Burkhard about via686a on the MSI K7T Pro
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@905 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-10-16 16:33:53 +00:00
Frodo Looijaard d25724c8a0 Sensors.conf.eg buglet fixed
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@833 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-07-06 13:45:50 +00:00
Bob Dougherty 1cdad3d31a bob: added comments to via686 section
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@831 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-07-05 00:45:01 +00:00
Mark D. Studebaker 139d5fed3a (mds) Add can't-miss comment at beginning about running 'sensors -s'.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@829 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-07-02 23:07:07 +00:00
Mark D. Studebaker 66113bdcd3 (mds) For as99127f, remove in7-8, sensor1-3, pwm3-4
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@807 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-05-13 17:31:11 +00:00
Mark D. Studebaker ce5c90df0b (mds) maxilife 99 support from Fons R.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@790 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-04-15 17:21:12 +00:00
Bob Dougherty 16c9a25ebe (bobd) added explanatory comments to via686a section
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@780 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-15 19:12:21 +00:00
Bob Dougherty 5e184497dc (bobd) added via686a entry
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@764 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-08 16:15:54 +00:00
Frodo Looijaard 77875f184c And yet another sensors.config.eg correction, thanks to Arvids
(arvids@vendomar.lv).


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@695 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-01-12 20:21:14 +00:00
Frodo Looijaard b21eb11f02 LM80 sensors.conf corrections
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@694 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-01-12 16:28:47 +00:00
Frodo Looijaard 8199abde46 New sensors.conf keyword 'ignore'
This often-asked for, long-planned and somewhat-forgotten feature
makes it possible to tell libsensors-linked applications (like
the sensors program) that certain features should not be displayed.
This is very nice for things like unconnected temperature sensors
or fans.

Modifications to the library code, to the sensors program and to
the documentation and example sensors.conf file.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@676 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-12-24 22:44:41 +00:00
Frodo Looijaard 01bad38253 Added DESTDIR Makefile variable
Set DESTDIR if you want to install at some other place then where you
will run everything from.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@675 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-12-24 19:52:28 +00:00
Mark D. Studebaker ca3bb1f55a (mds) fix the as99127f negative voltage computation.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@631 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-11-14 18:09:29 +00:00
Mark D. Studebaker 86de97cd41 (mds) as99127f update.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@618 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-10-31 02:38:49 +00:00
Mark D. Studebaker 5810aef4cc (mds) add as99127f.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@615 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-10-30 23:29:45 +00:00
Mark D. Studebaker 9e81117fbf (mds) Add support for w83627hf to 'sensors' program.
Assumed at this time to be identical to w83782d.
      No 627hf datasheet yet.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@526 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-08-15 21:34:21 +00:00
Kyosti Malkki a92e84fe2a (Kyösti)
* GL518 & GL520: setting fan{1,2}_min 0 masks alarm & beep

 * GL518SM rev 0x00 : Run iteration code in kernel thread

   Every run of "sensors" now reports results of the previous
   iteration run, and triggers a new one.

 * GL520: Reads all inputs now
 * GL520: Select between Temp2 or -12V input.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@520 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-07-26 15:31:45 +00:00
Kyosti Malkki c9e71cd9df (Kyösti)
* gl518sm document simplified for rev 0x00 & 0x80
 * gl518sm & gl520sm libsensors interface updates

 BTW: Revision is no longer part of the name, so old sensors.conf
      will not work at all with gl518sm.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@511 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-07-22 21:19:14 +00:00
Kyosti Malkki 6126040a88 (Kyösti)
* removed separation of GL518SM to revision 0x00 and 0x80


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@502 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-07-21 10:14:59 +00:00
Mark D. Studebaker d70c450c78 Added sensor[1-3] support for w83782d/783s to 'sensors'.
Now prints out what kind of sensor it is.
Also separated alarms for temp2 and temp3 for 782d/783s (they are
a single bit for 781d).


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@400 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-04-20 01:49:51 +00:00
Mark D. Studebaker ddfb8235ca changed default Vbat voltage from 3.3V to 3V for 782d/783s.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@348 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-03-29 00:57:31 +00:00
Philip Edelbrock 1ac215f6a1 (Phil) Added Fons Rademakers' <Fons.Rademakers@cern.ch> MaxiLife driver.
I've reviewed and applied the patch, but I would like some others to review
these commits too, to be safe.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@327 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-03-19 21:11:33 +00:00
Mark D. Studebaker 2ea22de081 Added 782d/783s section.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@306 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-03-11 03:32:46 +00:00
Kyosti Malkki b1f55390ae (Kyösti) Reverted to previous version, with only typos corrected.
Temp and fan alarms yet to be fixed.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@214 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-02-11 20:06:08 +00:00
Kyosti Malkki 90c8bc2ff6 (Kyösti) Modified gl518sm to use entries in /etc/sensors.conf.
Some small bugfixes, but temperature and fan alarms still don't work
as documented.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@213 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-02-11 01:18:34 +00:00
Frodo Looijaard 24792039f6 Adrian's copyright patch applied
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@207 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-02-08 22:50:29 +00:00
Kyosti Malkki 26ebdf4fa3 (Kyösti) SiS5595 documentation forwarding you to LM78 documents.
Renamed sensors entry from "SiS 5595 Sensor-*" to "sis5595-*"
Added this name in sensors.conf.eg to use lm78 names for inputs.
Small related document updates.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@199 7894878c-1315-0410-8ee3-d5d059ff63e0
1999-02-07 01:58:06 +00:00